75 lines
3.1 KiB
C++
75 lines
3.1 KiB
C++
/**
|
|
* @file nano_c_mk1.ino
|
|
* @author SEAL Ammonia subdivision
|
|
* @brief Firmware to allow a Arduino board to read the analog values from the ADS1115 and send them to the main board
|
|
* @version 0.1
|
|
* @date 2023-03-03
|
|
*
|
|
* @copyright Copyright (c) 2023
|
|
*
|
|
*/
|
|
#include <Adafruit_ADS1X15.h> // https://github.com/adafruit/Adafruit_ADS1X15, with partially its "continuous" example code integrated in ths
|
|
|
|
#define WAIT_TIME 1000UL //
|
|
#define ADS_MAX 4 // # of analog input pins of an ADS1115
|
|
#define VOLTAGE_RANGE 6.144f // ADS1115 default gain (+/- 6.144V). Change this number smaller will reduced its actual magnutude, and vice versa
|
|
#define CONST_I2C 32768 // a constant value
|
|
#define ADC1_ADDR 0x48 // Address (identifyer) for the first ADS1115 chip. We might gonna have up to four of those connected in one I2C line
|
|
#ifndef IRAM_ATTR
|
|
#define IRAM_ATTR
|
|
#endif
|
|
|
|
Adafruit_ADS1115 adc;
|
|
unsigned long currTime; // non-blocking timer
|
|
int channel = 0; // mux selector for which channel (AIN0-AIN3) to read the analog value from. See ADS1115 datasheet for details
|
|
float adcReadings[ADS_MAX]; // buffer to hold all values read from an adc
|
|
constexpr int READY_PIN = 3; // pin # that connects the "ALRT" pin of the ADS1115 to the board
|
|
volatile bool new_data = false; // "ready" flag for the ADS1115
|
|
|
|
/**
|
|
* @brief parse data from each channel (AIN0-AIN3) of ADS1115 to read the analog value from. See ADS1115 datasheet for details
|
|
*
|
|
* @acknowledgement https://github.com/RobTillaart/ADS1X15/blob/master/examples/ADS_continuous_4_channel/ADS_continuous_4_channel.ino
|
|
*/
|
|
void readData() {
|
|
// we only wanna grab/set data if the ADS is ready to
|
|
if (new_data) { // TODO: for some reason some board get the channel index off
|
|
// save the value
|
|
adcReadings[channel] = adc.getLastConversionResults();
|
|
channel = (channel + 1) % ADS_MAX; // request next channel #. Cycle back to zero if the number is larger than ADS_MAX (maybe must multiple of 2)
|
|
adc.startADCReading(MUX_BY_CHANNEL[channel], true);
|
|
new_data = false; // toggle back the flag
|
|
}
|
|
}
|
|
|
|
void IRAM_ATTR NewDataReadyISR() { // interrupt to make it read data
|
|
new_data = true;
|
|
}
|
|
|
|
void setup() {
|
|
Serial.begin(19200);
|
|
adc.begin(ADC1_ADDR, &Wire); // initialize one ADS1115 on approprate address
|
|
pinMode(READY_PIN, INPUT);
|
|
// "Ready" when on falling signal edge (negedge)
|
|
attachInterrupt(digitalPinToInterrupt(READY_PIN), NewDataReadyISR, FALLING);
|
|
adc.startADCReading(MUX_BY_CHANNEL[channel], true); // read once
|
|
currTime = millis(); // record the current time
|
|
}
|
|
|
|
void loop() {
|
|
readData(); // always read data from the ads1115
|
|
if (millis() - currTime >= WAIT_TIME) { // non-blocking time delay, giving ADC and everything else enough time to update
|
|
// print the array, as we don't have internal method for it.
|
|
Serial.print("[");
|
|
for (int i = 0; i < ADS_MAX; i++)
|
|
{
|
|
Serial.print(adcReadings[i] * VOLTAGE_RANGE / CONST_I2C);
|
|
if (i != ADS_MAX - 1) { // fence-post the array print
|
|
Serial.print(", ");
|
|
}
|
|
}
|
|
Serial.println("]");
|
|
currTime = millis(); // reset the current time
|
|
}
|
|
}
|