from ui import Frame
from threading import *
from read_arduino import *
from serial_plotter import *
import os, json, wx, warnings
import serial.tools.list_ports
import numpy as np

warnings.filterwarnings("ignore", category=DeprecationWarning)

HEIGHT = 800
WIDTH = 800

global ani


def main():
    #################### USER INPUTS ###########################
    # TODO: if there is already a setting.json exist, loads all inputs from there as 'default'

    resistors = [float(frame.r_ref_1.GetValue()), float(frame.r_ref_2.GetValue()), float(frame.r_ref_3.GetValue()),
                 float(frame.r_ref_4.GetValue()),
                 0]  # resisters for each An port, where n is an integer from 0-3. Use 0 if none. in Ohms
    input_voltage = float(frame.input_voltage.GetValue())
    bit_rate = float(frame.adjusted_volt.GetValue())
    port = frame.dev_list.GetValue()
    # typical window size: 480
    window_size = int(frame.m_textCtrl26.GetValue())

    #################### END USER INPUTS ########################

    # filename, disable customize name but should inform the user the current name of the data file on the front end
    # alternatively, could be default input if no other input given. But if there is might have problem...
    dat_folder = "RecordedData"
    os.makedirs(dat_folder, exist_ok=True)
    filename = os.path.join(os.getcwd(), dat_folder, f"{datetime.now().strftime('%Y-%m-%d_%H%M%S')}.csv")
    delay = 1000  # millisec pe r data, defined in the firmware
    if not (len(resistors) == 5):
        raise ValueError(f"expecting 5 resistor values, but got {len(resistors)}!!!")

    gen_settings(resistors, input_voltage, bit_rate, port, filename, window_size, delay)
    return filename


def gen_settings(resistors, input_voltage, bits, port, filename, window_size, delay):
    """
	export all inputs from main() to a .json file
	"""
    name = "settings.json"
    settings = {}
    settings["refRes"] = resistors
    settings["sensor_ports"] = np.where(np.array(resistors) > 0)[0].tolist()
    settings["v_in"] = input_voltage
    settings["port"] = port
    settings["resolution"] = bits
    settings["winSize"] = window_size
    settings["file_name"] = filename
    settings["delay"] = delay
    open(name, 'w').write(json.dumps(settings, indent=4))
    open(filename, "a", newline="", encoding="utf-8")


def get_devices():
    """
	get all available devices connected, put them in the UI's dropdown menu
	"""
    ports = [comport.device for comport in serial.tools.list_ports.comports()]  # get all available ports
    frame.dev_list.AppendItems(ports)


def runPlot(e):
    global ani
    plotter = SerialPlotter()
    ani = plotter.plotting()
    plotter.fig.show()


def run(e):
    file = main()
    t1 = Thread(target=read, args=())
    t1.setDaemon(True)
    t1.start()

    runPlot(e)
    frame.btLaunch.Enable(False)
    frame.plot_but.Enable(True)  # this might have some problem ... what happen if user spamming the plot button?
    if not frame.show_msg.GetValue():
        frame.Hide()


if __name__ == '__main__':
    app = wx.App()
    frame = Frame(None)
    get_devices()
    frame.SetTitle("Cease your resistance! - alpha 0.1.1")
    frame.btLaunch.Bind(wx.EVT_BUTTON, run)
    frame.plot_but.Bind(wx.EVT_BUTTON,
                        runPlot)  # There is one problem with this approch: what happen if user spamming the plot button?
    if os.path.isfile("settings.json"):
        print("Found existing settings.json, auto-fill previous inputs!")
        settings = json.load(open('settings.json', 'r'))
        frame.r_ref_1.SetValue(str(settings["refRes"][0]))
        frame.r_ref_2.SetValue(str(settings["refRes"][1]))
        frame.r_ref_3.SetValue(str(settings["refRes"][2]))
        frame.r_ref_4.SetValue(str(settings["refRes"][3]))
        frame.input_voltage.SetValue(str(settings["v_in"]))
        frame.adjusted_volt.SetValue(str(settings["resolution"]))
        frame.m_textCtrl26.SetValue(str(settings["winSize"]))

    frame.Show()
    app.MainLoop()