#***************************************************************************************** # Vivado (TM) v2018.2 (64-bit) # # build_project.tcl: Tcl script for re-creating project 'qlaser_eclypse7' # # Generated by Vivado on Thu Feb 16 16:07:58 -0800 2023 # IP Build 2256618 on Thu Jun 14 22:10:49 MDT 2018 # # This file contains the Vivado Tcl commands for re-creating the project to the state* # when this script was generated. In order to re-create the project, please source this # file in the Vivado Tcl Shell. # # * Note that the runs in the created project will be configured the same way as the # original project, however they will not be launched automatically. To regenerate the # run results please launch the synthesis/implementation runs as needed. # #***************************************************************************************** # NOTE: In order to use this script for source control purposes, please make sure that the # following files are added to the source control system:- # # 1. This project restoration tcl script (build_project.tcl) that was generated. # # 2. The following source(s) files that were local or imported into the original project. # (Please see the '$orig_proj_dir' and '$origin_dir' variable setting below at the start of the script) # # "D:/Work/UW-Quantum/tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/bd/ps1/ps1.bd" # "D:/Work/UW-Quantum/tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/bd/ps1/hdl/ps1_wrapper.vhd" # "D:/Work/UW-Quantum/tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/ip/clkpll/clkpll.xci" # # 3. The following remote source files that were added to the original project:- # # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_pkg.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/blink.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/clkreset.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/serial_io/nc3_cpu2uart.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/serial_io/nc3_serial_pkg_100MHz.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/serial_io/nc3_uart.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/serial_io/nc3_uart2cpu.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/serial_io/qlaser_cpuint_serial.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_dac_dc_package.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_spi.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_dacs_dc.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_dacs_pulse.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_version_pkg.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_misc.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_top.vhd" # "D:/Work/UW-Quantum/github/NANO_QLASER/tools/xilinx/pinout.xdc" # "D:/Work/UW-Quantum/github/NANO_QLASER/tools/xilinx/set_usercode.xdc" # "D:/Work/UW-Quantum/github/NANO_QLASER/tools/xilinx/qlaser_timing.xdc" # #***************************************************************************************** # Set the reference directory for source file relative paths (by default the value is script directory path) set origin_dir "." # Use origin directory path location variable, if specified in the tcl shell if { [info exists ::origin_dir_loc] } { set origin_dir $::origin_dir_loc } # Set the project name set _xil_proj_name_ "qlaser_eclypse7" # Use project name variable, if specified in the tcl shell if { [info exists ::user_project_name] } { set _xil_proj_name_ $::user_project_name } variable script_file set script_file "build_project.tcl" # Help information for this script proc help {} { variable script_file puts "\nDescription:" puts "Recreate a Vivado project from this script. The created project will be" puts "functionally equivalent to the original project for which this script was" puts "generated. The script contains commands for creating a project, filesets," puts "runs, adding/importing sources and setting properties on various objects.\n" puts "Syntax:" puts "$script_file" puts "$script_file -tclargs \[--origin_dir \]" puts "$script_file -tclargs \[--project_name \]" puts "$script_file -tclargs \[--help\]\n" puts "Usage:" puts "Name Description" puts "-------------------------------------------------------------------------" puts "\[--origin_dir \] Determine source file paths wrt this path. Default" puts " origin_dir path value is \".\", otherwise, the value" puts " that was set with the \"-paths_relative_to\" switch" puts " when this script was generated.\n" puts "\[--project_name \] Create project with the specified name. Default" puts " name is the name of the project from where this" puts " script was generated.\n" puts "\[--help\] Print help information for this script" puts "-------------------------------------------------------------------------\n" exit 0 } if { $::argc > 0 } { for {set i 0} {$i < $::argc} {incr i} { set option [string trim [lindex $::argv $i]] switch -regexp -- $option { "--origin_dir" { incr i; set origin_dir [lindex $::argv $i] } "--project_name" { incr i; set _xil_proj_name_ [lindex $::argv $i] } "--help" { help } default { if { [regexp {^-} $option] } { puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n" return 1 } } } } } # Set the directory path for the original project from where this script was exported set orig_proj_dir "[file normalize "$origin_dir/../../../../tools/Vivado2018_2/qlaser_eclypse7"]" # Create project create_project ${_xil_proj_name_} ./${_xil_proj_name_} -part xc7z020clg484-1 # Set the directory path for the new project set proj_dir [get_property directory [current_project]] # Reconstruct message rules # None # Set project properties set obj [current_project] set_property -name "board_part" -value "digilentinc.com:eclypse-z7:part0:1.1" -objects $obj set_property -name "default_lib" -value "xil_defaultlib" -objects $obj set_property -name "dsa.accelerator_binary_content" -value "bitstream" -objects $obj set_property -name "dsa.accelerator_binary_format" -value "xclbin2" -objects $obj set_property -name "dsa.board_id" -value "eclypse-z7" -objects $obj set_property -name "dsa.description" -value "Vivado generated DSA" -objects $obj set_property -name "dsa.dr_bd_base_address" -value "0" -objects $obj set_property -name "dsa.emu_dir" -value "emu" -objects $obj set_property -name "dsa.flash_interface_type" -value "bpix16" -objects $obj set_property -name "dsa.flash_offset_address" -value "0" -objects $obj set_property -name "dsa.flash_size" -value "1024" -objects $obj set_property -name "dsa.host_architecture" -value "x86_64" -objects $obj set_property -name "dsa.host_interface" -value "pcie" -objects $obj set_property -name "dsa.num_compute_units" -value "60" -objects $obj set_property -name "dsa.platform_state" -value "pre_synth" -objects $obj set_property -name "dsa.uses_pr" -value "1" -objects $obj set_property -name "dsa.vendor" -value "xilinx" -objects $obj set_property -name "dsa.version" -value "0.0" -objects $obj set_property -name "enable_vhdl_2008" -value "1" -objects $obj set_property -name "ip_cache_permissions" -value "read write" -objects $obj set_property -name "ip_output_repo" -value "$proj_dir/${_xil_proj_name_}.cache/ip" -objects $obj set_property -name "mem.enable_memory_map_generation" -value "1" -objects $obj set_property -name "sim.central_dir" -value "$proj_dir/${_xil_proj_name_}.ip_user_files" -objects $obj set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj set_property -name "simulator_language" -value "Mixed" -objects $obj set_property -name "target_language" -value "VHDL" -objects $obj set_property -name "webtalk.activehdl_export_sim" -value "6" -objects $obj set_property -name "webtalk.ies_export_sim" -value "6" -objects $obj set_property -name "webtalk.modelsim_export_sim" -value "6" -objects $obj set_property -name "webtalk.questa_export_sim" -value "6" -objects $obj set_property -name "webtalk.riviera_export_sim" -value "6" -objects $obj set_property -name "webtalk.vcs_export_sim" -value "6" -objects $obj set_property -name "webtalk.xsim_export_sim" -value "6" -objects $obj set_property -name "xpm_libraries" -value "XPM_CDC XPM_FIFO XPM_MEMORY" -objects $obj # Create 'sources_1' fileset (if not found) if {[string equal [get_filesets -quiet sources_1] ""]} { create_fileset -srcset sources_1 } # Set IP repository paths set obj [get_filesets sources_1] set_property "ip_repo_paths" "[file normalize "$origin_dir/../../../../../Common/IP_GJED"]" $obj # Rebuild user ip_repo's index before adding any source files update_ip_catalog -rebuild # Set 'sources_1' fileset object set obj [get_filesets sources_1] set files [list \ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_pkg.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/fpga/blink.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/fpga/clkreset.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/serial_io/nc3_cpu2uart.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/serial_io/nc3_serial_pkg_100MHz.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/serial_io/nc3_uart.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/serial_io/nc3_uart2cpu.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/serial_io/qlaser_cpuint_serial.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_dac_dc_package.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_spi.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_dacs_dc.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_dacs_pulse.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_version_pkg.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_misc.vhd"] \ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_top.vhd"] \ ] add_files -norecurse -fileset $obj $files # Add local files from the original project (-no_copy_sources specified) set files [list \ [file normalize "${origin_dir}/../../../../tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/bd/ps1/ps1.bd" ]\ [file normalize "${origin_dir}/../../../../tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/bd/ps1/hdl/ps1_wrapper.vhd" ]\ ] set added_files [add_files -fileset sources_1 $files] # Set 'sources_1' fileset file properties for remote files set file "$origin_dir/../../src/hdl/fpga/qlaser_pkg.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/fpga/blink.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/fpga/clkreset.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/serial_io/nc3_cpu2uart.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/serial_io/nc3_serial_pkg_100MHz.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/serial_io/nc3_uart.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/serial_io/nc3_uart2cpu.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/serial_io/qlaser_cpuint_serial.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/fpga/qlaser_dac_dc_package.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/fpga/qlaser_spi.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/fpga/qlaser_dacs_dc.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/fpga/qlaser_dacs_pulse.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/fpga/qlaser_version_pkg.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/fpga/qlaser_misc.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj set file "$origin_dir/../../src/hdl/fpga/qlaser_top.vhd" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj # Set 'sources_1' fileset file properties for local files set file "ps1/ps1.bd" set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "registered_with_manager" -value "1" -objects $file_obj set file "hdl/ps1_wrapper.vhd" set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "file_type" -value "VHDL" -objects $file_obj # Set 'sources_1' fileset properties set obj [get_filesets sources_1] set_property -name "top" -value "qlaser_top" -objects $obj # Set 'sources_1' fileset object set obj [get_filesets sources_1] # Add local files from the original project (-no_copy_sources specified) set files [list \ [file normalize "${origin_dir}/../../../../tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/ip/clkpll/clkpll.xci" ]\ ] set added_files [add_files -fileset sources_1 $files] # Set 'sources_1' fileset file properties for remote files # None # Set 'sources_1' fileset file properties for local files set file "clkpll/clkpll.xci" set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]] set_property -name "generate_files_for_reference" -value "0" -objects $file_obj set_property -name "registered_with_manager" -value "1" -objects $file_obj if { ![get_property "is_locked" $file_obj] } { set_property -name "synth_checkpoint_mode" -value "Singular" -objects $file_obj } # Create 'constrs_1' fileset (if not found) if {[string equal [get_filesets -quiet constrs_1] ""]} { create_fileset -constrset constrs_1 } # Set 'constrs_1' fileset object set obj [get_filesets constrs_1] # Add/Import constrs file and set constrs file properties set file "[file normalize "$origin_dir/pinout.xdc"]" set file_added [add_files -norecurse -fileset $obj [list $file]] set file "$origin_dir/pinout.xdc" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]] set_property -name "file_type" -value "XDC" -objects $file_obj # Add/Import constrs file and set constrs file properties set file "[file normalize "$origin_dir/set_usercode.xdc"]" set file_added [add_files -norecurse -fileset $obj [list $file]] set file "$origin_dir/set_usercode.xdc" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]] set_property -name "file_type" -value "XDC" -objects $file_obj # Add/Import constrs file and set constrs file properties set file "[file normalize "$origin_dir/qlaser_timing.xdc"]" set file_added [add_files -norecurse -fileset $obj [list $file]] set file "$origin_dir/qlaser_timing.xdc" set file [file normalize $file] set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]] set_property -name "file_type" -value "XDC" -objects $file_obj # Set 'constrs_1' fileset properties set obj [get_filesets constrs_1] # Create 'sim_1' fileset (if not found) if {[string equal [get_filesets -quiet sim_1] ""]} { create_fileset -simset sim_1 } # Set 'sim_1' fileset object set obj [get_filesets sim_1] # Empty (no sources present) # Set 'sim_1' fileset properties set obj [get_filesets sim_1] set_property -name "sim_mode" -value "post-implementation" -objects $obj set_property -name "top" -value "qlaser_top" -objects $obj set_property -name "top_lib" -value "xil_defaultlib" -objects $obj # Create 'synth_1' run (if not found) if {[string equal [get_runs -quiet synth_1] ""]} { create_run -name synth_1 -part xc7z020clg484-1 -flow {Vivado Synthesis 2018} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1 } else { set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1] set_property flow "Vivado Synthesis 2018" [get_runs synth_1] } set obj [get_runs synth_1] set_property set_report_strategy_name 1 $obj set_property report_strategy {Vivado Synthesis Default Reports} $obj set_property set_report_strategy_name 0 $obj # Create 'synth_1_synth_report_utilization_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } { create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1 } set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] if { $obj != "" } { } set obj [get_runs synth_1] set_property -name "needs_refresh" -value "1" -objects $obj set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj # set the current synth run current_run -synthesis [get_runs synth_1] # Create 'impl_1' run (if not found) if {[string equal [get_runs -quiet impl_1] ""]} { create_run -name impl_1 -part xc7z020clg484-1 -flow {Vivado Implementation 2018} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1 } else { set_property strategy "Vivado Implementation Defaults" [get_runs impl_1] set_property flow "Vivado Implementation 2018" [get_runs impl_1] } set obj [get_runs impl_1] set_property set_report_strategy_name 1 $obj set_property report_strategy {Vivado Implementation Default Reports} $obj set_property set_report_strategy_name 0 $obj # Create 'impl_1_init_report_timing_summary_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } { create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] if { $obj != "" } { set_property -name "is_enabled" -value "0" -objects $obj } # Create 'impl_1_opt_report_drc_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } { create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] if { $obj != "" } { } # Create 'impl_1_opt_report_timing_summary_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } { create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] if { $obj != "" } { set_property -name "is_enabled" -value "0" -objects $obj } # Create 'impl_1_power_opt_report_timing_summary_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } { create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] if { $obj != "" } { set_property -name "is_enabled" -value "0" -objects $obj } # Create 'impl_1_place_report_io_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } { create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] if { $obj != "" } { } # Create 'impl_1_place_report_utilization_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } { create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] if { $obj != "" } { } # Create 'impl_1_place_report_control_sets_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } { create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] if { $obj != "" } { } # Create 'impl_1_place_report_incremental_reuse_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } { create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] if { $obj != "" } { set_property -name "is_enabled" -value "0" -objects $obj } # Create 'impl_1_place_report_incremental_reuse_1' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } { create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] if { $obj != "" } { set_property -name "is_enabled" -value "0" -objects $obj } # Create 'impl_1_place_report_timing_summary_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } { create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] if { $obj != "" } { set_property -name "is_enabled" -value "0" -objects $obj } # Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } { create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] if { $obj != "" } { set_property -name "is_enabled" -value "0" -objects $obj } # Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } { create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] if { $obj != "" } { set_property -name "is_enabled" -value "0" -objects $obj } # Create 'impl_1_route_report_drc_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } { create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] if { $obj != "" } { } # Create 'impl_1_route_report_methodology_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } { create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] if { $obj != "" } { } # Create 'impl_1_route_report_power_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } { create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] if { $obj != "" } { } # Create 'impl_1_route_report_route_status_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } { create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] if { $obj != "" } { } # Create 'impl_1_route_report_timing_summary_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } { create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] if { $obj != "" } { } # Create 'impl_1_route_report_incremental_reuse_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } { create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] if { $obj != "" } { } # Create 'impl_1_route_report_clock_utilization_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } { create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] if { $obj != "" } { } # Create 'impl_1_route_report_bus_skew_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0] "" ] } { create_report_config -report_name impl_1_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0] if { $obj != "" } { } # Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } { create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] if { $obj != "" } { } # Create 'impl_1_post_route_phys_opt_report_bus_skew_0' report (if not found) if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0] "" ] } { create_report_config -report_name impl_1_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_1 } set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0] if { $obj != "" } { } set obj [get_runs impl_1] set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj # set the current impl run current_run -implementation [get_runs impl_1] puts "INFO: Project created:${_xil_proj_name_}"