first commit

.gitignore

@@ -0,0 +1,19 @@
+*.log
+*.jou
+*.ini
+*.wlf
+work
+transcript
+prj
+.Xil
+tools/xilinx-zcu/*/sim/
+tools/xilinx-zcu/*/doc/
+tools/xilinx-zcu/*/hdl/
+tools/xilinx-zcu/*/simulation/
+tools/xilinx-zcu/*/synth/
+tools/xilinx-zcu/*/misc/
+tools/xilinx-zcu/*/*.xdc
+tools/xilinx-zcu/*/*.veo
+tools/xilinx-zcu/*/*.vho
+tools/xilinx-zcu/*/*.xml
+tools/xilinx-zcu/*/*.dcp

README.md

@@ -0,0 +1,3 @@
+# QLASER_V_EYHC
+
+## Do NOT "merge" any branches. Each branch is a separate thing!!!!

documents/README.md

@@ -0,0 +1 @@
+

src/hdl/README.md

@@ -0,0 +1 @@
+

src/hdl/modules/qlaser_dacs_pulse_channel.vhdl

@@ -0,0 +1,269 @@
+---------------------------------------------------------------
+--  File         : qlaser_dacs_pulse_channel.vhd
+--  Description  : Single channel of pulse output
+----------------------------------------------------------------
+library ieee;
+use     ieee.std_logic_1164.all;
+use     ieee.numeric_std.all;
+
+use     work.qlaser_pkg.all;
+
+entity qlaser_dacs_pulse_channel is
+port (
+    reset               : in  std_logic;
+    clk                 : in  std_logic; 
+
+    enable              : in  std_logic;                        -- Set when DAC interface is running
+    start               : in  std_logic;                        -- Set when pulse generation sequence begins (trigger)
+    cnt_time            : in  std_logic_vector(23 downto 0);    -- Time since trigger.
+
+    busy                : out std_logic;                        -- Status signal
+
+    -- CPU interface
+    cpu_addr            : in  std_logic_vector(11 downto 0);    -- Address input
+    cpu_wdata           : in  std_logic_vector(31 downto 0);    -- Data input
+    cpu_wr              : in  std_logic;                        -- Write enable 
+    cpu_sel             : in  std_logic;                        -- Block select
+    cpu_rdata           : out std_logic_vector(31 downto 0);    -- Data output
+    cpu_rdata_dv        : out std_logic;                        -- Acknowledge output
+     
+    -- AXI-stream output
+    axis_tready         : in  std_logic;                        -- axi_stream ready from downstream module
+    axis_tdata          : out std_logic_vector(15 downto 0);    -- axi stream output data
+    axis_tvalid         : out std_logic;                        -- axi_stream output data valid
+    axis_tlast          : out std_logic                         -- axi_stream output set on last data  
+);
+end entity;
+
+----------------------------------------------------------------
+-- Single channel pulse generator with two RAMs
+----------------------------------------------------------------
+architecture channel of qlaser_dacs_pulse_channel is
+-- Constants declearations
+constant C_RAM_SELECT       : integer   := 11;                -- Select bit for which RAM for CPU read/write
+constant C_NUM_PULSE        : integer   := 16;                -- Number of output data values from pulse RAM (16x24-bit)
+
+constant C_START_TIME       : integer   := 24;                -- Start time for pulse generation
+constant C_BITS_ADDR_START  : integer   := 12;                -- Number of bits for starting address
+constant C_BITS_ADDR_LENGTH : integer   := 10;                -- Number of bits for length address used by an edge of a pulse
+constant C_BITS_GAIN_FACTOR : integer   := 16;                -- Number of bits in gain table
+constant C_BITS_TIME_FACTOR : integer   := 16;                -- Number of bits in time table
+constant C_BITS_TIME_INT    : integer   := 14;                -- Starting bit for time integer part of the time factor, counting from MSB
+constant C_BITS_TIME_FRAC   : integer   :=  5;                -- Starting bit for time fractional part of the time factor, counting from MSB
+constant C_BITS_ADDR_TOP    : integer   := 17;                -- Number of bits for the "flat top", the top of the pulse
+
+constant C_LENGTH_WAVEFORM  : integer   := 1024;              -- Number of output data values from waveform RAM (1024x16-bit)
+constant C_BITS_ADDR_WAVE   : integer   := 10;                -- Number of bits in address for waveform RAM
+
+constant C_PC_INCR          : integer   := 4;                 -- Width of pulse counter increment
+
+-- Signal declarations for pulse RAM
+signal ram_pulse_we         : std_logic_vector( 0 downto 0);  -- Write enable for pulse RAM
+signal ram_pulse_addra      : std_logic_vector( 9 downto 0);  -- Address for pulse RAM
+signal ram_pulse_dina       : std_logic_vector(31 downto 0);  -- Data for pulse RAM
+signal ram_pulse_douta      : std_logic_vector(31 downto 0);  -- Data out from pulse RAM
+signal ram_pulse_addrb      : std_logic_vector( 9 downto 0);  -- Address for pulse RAM
+signal ram_pulse_doutb      : std_logic_vector(31 downto 0);  -- Data out from pulse RAM
+
+-- Signal declarations for waveform RAM
+signal ram_waveform_wea     : std_logic_vector( 0 downto 0);  -- Write enable for waveform RAM
+signal ram_waveform_addra   : std_logic_vector(10 downto 0);  -- Address for waveform RAM
+signal ram_waveform_dina    : std_logic_vector(31 downto 0);  -- Data for waveform RAM
+signal ram_waveform_douta   : std_logic_vector(31 downto 0);  -- Data out from waveform RAM
+signal ram_waveform_addrb   : std_logic_vector(11 downto 0);  -- Address for waveform RAM
+signal ram_waveform_doutb   : std_logic_vector(15 downto 0);  -- Data out from waveform RAM
+
+-- State variable type declaration for main state machine
+type t_sm_state  is (
+    S_RESET,    -- Wait for 'enable'. Stay here until JESD interface is up and running,
+    S_IDLE,     -- Wait for 'start'
+    S_WAIT,     -- Wait for cnt_time, external input, to match pulse position RAM output
+    S_WAVE_UP,  -- Output the rising edge of a waveform
+    S_WAVE_FLAT,-- Output the flat top part of a waveform
+    S_WAVE_DOWN -- Output the falling edge of a waveform
+);
+signal sm_state             : t_sm_state;
+signal sm_wavedata          : std_logic_vector(15 downto 0);  -- Waveform RAM data
+signal sm_wavedata_dv       : std_logic;                      -- Signal to indicate that waveform RAM data is valid
+signal sm_busy              : std_logic;                      -- Signal to indicate that s.m. is not idle
+
+-- Misc signals
+signal ram_pulse_douta_d1   : std_logic_vector(31 downto 0);  -- Delay distrib RAM output to match pipeline of Block RAM
+signal cpu_rdata_dv_e1      : std_logic;
+signal cpu_rdata_dv_e2      : std_logic;
+signal cpu_rdata_ramsel_d1  : std_logic;
+signal cpu_rdata_ramsel_d2  : std_logic;
+
+-- Pipeline delays
+signal start_d1             : std_logic;
+signal enable_d1            : std_logic;
+
+begin
+
+    ----------------------------------------------------------------
+    -- Pulse Definition Block RAM.
+    -- Synch write, Synch read
+    -- Port A is for CPU read/write. 1024x32-bit
+    -- Port B is for pulse time data output. 1024x32-bit
+    ----------------------------------------------------------------
+    u_ram_pulse : entity work.bram_pulse_definition
+    port map(
+        -- Port A CPU Bus
+        clka  => clk,                  -- input std_logic
+        wea   => ram_pulse_we,         -- input slv( 0 to 0 )
+        addra => ram_pulse_addra,      -- input slv( 9 downto 0 )
+        dina  => ram_pulse_dina,       -- input slv( 31 downto 0 )
+        douta => ram_pulse_douta,      -- output slv( 31 downto 0 ),
+        -- Port B waveform input        
+        clkb  => clk,
+        web   => (others=>'0'),
+        addrb => ram_pulse_addrb,      -- input slv( 9 downto 0 )
+        dinb  => (others=>'0'),
+        doutb => ram_pulse_doutb       -- output slv( 31 downto 0 )
+    );
+    
+    
+    ----------------------------------------------------------------
+    -- Waveform table Block RAM.
+    -- Synch write, Synch read
+    -- Port A is for CPU read/write. 2048x32-bit
+    -- Port B is for waveform data.  4096x16-bit
+    ----------------------------------------------------------------
+    u_ram_waveform : entity work.bram_waveform
+    port map (
+        -- Port A CPU Bus
+        clka        => clk                ,   -- input  std_logic
+        wea         => ram_waveform_wea   ,   -- input  slv(0 downto 0)
+        addra       => ram_waveform_addra ,   -- input  slv(10 downto 0)
+        dina        => ram_waveform_dina  ,   -- input  slv(31 downto 0)
+        douta       => ram_waveform_douta ,   -- output slv(31 downto 0)
+        
+        -- Port B waveform output
+        clkb        => clk                ,   -- input  std_logic
+        web         => (others=>'0')      ,   -- input  slv(0 downto 0)
+        addrb       => ram_waveform_addrb ,   -- input  slv(11 downto 0)
+        dinb        => (others=>'0')      ,   -- input  slv(15 downto 0)
+        doutb       => ram_waveform_doutb     -- output slv(15 downto 0)
+    );
+
+        ----------------------------------------------------------------
+    -- CPU Read/Write RAM
+    -- MSB of cpu_addr is used to select one of the two RAMs 
+    -- to read/write, and the remainder are a  9-bit or 4-bit RAM address.
+    ----------------------------------------------------------------
+    pr_ram_rw  : process (reset, clk)
+    begin
+        if (reset = '1') then
+        
+            ram_pulse_addra     <= (others=>'0');
+            ram_pulse_dina      <= (others=>'0');
+            ram_pulse_we        <= (others=>'0');
+
+            ram_waveform_wea    <= (others=>'0');
+            ram_waveform_addra  <= (others=>'0');
+            ram_waveform_dina   <= (others=>'0');
+
+            cpu_rdata           <= (others=>'0');
+            cpu_rdata_dv        <= '0';
+            cpu_rdata_dv_e1     <= '0';
+            cpu_rdata_dv_e2     <= '0';
+            cpu_rdata_ramsel_d1 <= '0';
+            cpu_rdata_ramsel_d2 <= '0';
+            
+        elsif rising_edge(clk) then
+        
+
+            -------------------------------------------------
+            -- CPU writing RAM
+            -------------------------------------------------
+            if (cpu_wr = '1') and (cpu_sel = '1') then
+            
+                -- 0 for pulse definition, 1 for waveform table
+                if (cpu_addr(9) = '1') then
+
+                    ram_pulse_addra     <= (others=>'0');
+                    ram_pulse_dina      <= (others=>'0');
+                    ram_pulse_we        <= (others=>'0');
+
+                    ram_waveform_wea(0) <= '1';
+                    ram_waveform_addra  <= cpu_addr(10 downto 0);
+                    ram_waveform_dina   <= cpu_wdata;
+
+                else
+
+                    ram_pulse_addra     <= cpu_addr(9 downto 0);
+                    ram_pulse_dina      <= cpu_wdata;
+                    ram_pulse_we        <= std_logic_vector(to_unsigned(1, ram_pulse_we'length));
+                    ram_waveform_wea    <= (others=>'0');
+                    ram_waveform_addra  <= (others=>'0');
+                    ram_waveform_dina   <= (others=>'0');
+
+                end if;
+                    
+                cpu_rdata_dv_e1     <= '0';
+                cpu_rdata_dv_e2     <= '0';
+                cpu_rdata_ramsel_d1 <= '0';
+                cpu_rdata_ramsel_d2 <= '0';
+
+            
+            -------------------------------------------------
+            -- CPU read
+            -------------------------------------------------
+            elsif (cpu_wr = '0') and (cpu_sel = '1') then
+                
+                if (cpu_addr(C_RAM_SELECT) = '1') then -- Waveform
+                    ram_pulse_addra     <= (others=>'0');
+                    ram_waveform_addra  <= cpu_addr(10 downto 0);
+                else                        -- Pulse
+                    ram_pulse_addra     <= cpu_addr(9 downto 0);
+                    ram_pulse_douta_d1  <= ram_pulse_douta;         -- Delay distrib RAM output to match pipeline of Block RAM
+                    ram_waveform_addra  <= (others=>'0');
+                end if;
+
+                ram_pulse_we        <= (others=>'0');
+                ram_waveform_wea(0) <= '0';
+                
+                cpu_rdata_dv_e2     <= '1';             -- DV for cycle, when RAM output occurs
+                cpu_rdata_dv_e1     <= cpu_rdata_dv_e2; -- DV for next cycle
+                cpu_rdata_ramsel_d1 <= cpu_addr(9);     -- Save the select bit one cycle later
+                cpu_rdata_ramsel_d2 <= cpu_rdata_ramsel_d1;  
+                    
+            else
+                ram_pulse_addra     <= (others=>'0');
+                ram_pulse_we        <= (others=>'0');
+                ram_waveform_addra  <= (others=>'0');
+                ram_waveform_wea(0) <= '0';
+
+                cpu_rdata_dv_e2     <= '0';
+                cpu_rdata_dv_e1     <= cpu_rdata_dv_e2; -- DV for next cycle
+                cpu_rdata_ramsel_d1 <= '0';
+                cpu_rdata_ramsel_d2 <= cpu_rdata_ramsel_d1;  
+            
+            end if;
+            
+            -------------------------------------------------
+            -- Output the delayed RAM data
+            -- This adds a pipeline delay to the cpu_rdata_dv to account for
+            -- the delay in reading data from the RAM
+            -------------------------------------------------
+            if (cpu_rdata_dv_e1 = '1') then
+                    
+                cpu_rdata_dv    <= '1';
+                
+                -- Select source of output data
+                if (cpu_rdata_ramsel_d2 = '1') then   -- Output is from waveform table
+                    cpu_rdata   <= ram_waveform_douta;
+
+                elsif (cpu_rdata_ramsel_d2 = '0') then
+                    cpu_rdata   <= ram_pulse_douta_d1;
+                end if;
+
+            else
+                cpu_rdata       <= (others=>'0');
+                cpu_rdata_dv    <= '0';
+            end if;
+            
+        end if;
+        
+    end process;
+end channel;

src/hdl/pkg/qlaser_dac_dc_pkg.vhd

@@ -0,0 +1,30 @@
+----------------------------------------------------------------------------------------
+-- Project       : qlaser FPGA
+-- File          : qlaser_dac_dc_pkg.vhd
+-- Description   : Version package file.
+-- Author        : akozyra
+----------------------------------------------------------------------------------------
+library ieee;
+use     ieee.std_logic_1164.all;
+
+package qlaser_dac_dc_pkg is
+
+----------------------------------------------------------------------------------------
+--  Constants 
+----------------------------------------------------------------------------------------
+
+-- Addresses
+constant C_ADDR_SPI0                : std_logic_vector(2 downto 0) := "000";
+constant C_ADDR_SPI1                : std_logic_vector(2 downto 0) := "001";
+constant C_ADDR_SPI2                : std_logic_vector(2 downto 0) := "010";
+constant C_ADDR_SPI3                : std_logic_vector(2 downto 0) := "011";
+constant C_ADDR_SPI_ALL             : std_logic_vector(2 downto 0) := "100";
+constant C_ADDR_INTERNAL_REF        : std_logic_vector(2 downto 0) := "101";
+constant C_ADDR_POWER_ON            : std_logic_vector(2 downto 0) := "110";
+
+-- Commands
+constant C_CMD_DAC_DC_WR            : std_logic_vector(3 downto 0) := "0011";
+constant C_CMD_DAC_DC_INTERNAL_REF  : std_logic_vector(3 downto 0) := "1000";
+constant C_CMD_DAC_DC_POWER         : std_logic_vector(3 downto 0) := "0100";
+
+end package qlaser_dac_dc_pkg;

src/hdl/pkg/qlaser_pkg.vhd

@@ -0,0 +1,146 @@
+-------------------------------------------------------------------------------
+-- Filename :   qlaser_pkg.vhd
+-------------------------------------------------------------------------------
+library ieee;
+use     ieee.std_logic_1164.all;
+use     ieee.numeric_std.all;
+
+use     work.qlaser_dac_dc_pkg.all;
+-- use     work.qlaser_dac_ac_pkg.all;
+
+--------------------------------------------------------------------------------
+-- FPGA constant definitions
+-------------------------------------------------------------------------------
+package qlaser_pkg is
+
+-- FPGA internal (PLL) clock freq expressed in MHz
+constant C_CLK_FREQ_MHZ         : real      := 100.0; 
+-- Clock period
+constant C_CLK_PERIOD           : time      := integer(1.0E+6/(C_CLK_FREQ_MHZ)) * 1 ps;
+
+constant C_NUM_CHAN_DC          : integer := 32;    -- Number of DC channels
+constant C_NUM_CHAN_AC          : integer := 32;    -- Number of AC (pulse) channels
+
+--------------------------------------------------------------------------------
+-- FPGA Addresses
+-- Main blocks. Decoded from upper 4 bits of address [15:12]
+--------------------------------------------------------------------------------
+constant ADR_BASE_DC            : std_logic_vector( 3 downto 0) :=  X"0";    -- Registers to load DC DAC values
+constant ADR_BASE_PULSE         : std_logic_vector( 3 downto 0) :=  X"1";    -- RAMs for Pulse output start/stop times
+constant ADR_BASE_MISC          : std_logic_vector( 3 downto 0) :=  X"2";    -- Misc, LEDs, switches, power control
+
+--------------------------------------------------------------------------------
+-- Define the number of internal blocks that are addressed by the CPU
+--------------------------------------------------------------------------------
+constant C_NUM_BLOCKS           : integer   := 3; 
+type t_arr_cpu_dout is array (0 to C_NUM_BLOCKS-1) of std_logic_vector(31 downto 0);
+type t_arr_dout_ac  is array (0 to C_NUM_CHAN_AC-1) of std_logic_vector(15 downto 0);
+
+
+-------------------------------------------------------------------------------------------------------------------------- 
+-- 'DC' DAC block registers. 32 16-bit DAC outputs [5:3]
+constant C_ADDR_CH_SPI0         : std_logic_vector(2 downto 0) := "000";
+constant C_ADDR_CH_SPI1         : std_logic_vector(2 downto 0) := "001";
+constant C_ADDR_CH_SPI2         : std_logic_vector(2 downto 0) := "010";
+constant C_ADDR_CH_SPI3         : std_logic_vector(2 downto 0) := "011";
+constant C_ADDR_CH_SPI_ALL      : std_logic_vector(2 downto 0) := "100";
+constant C_ADDR_INTERNAL_REF    : std_logic_vector(2 downto 0) := "101";
+constant C_ADDR_POWER_ON        : std_logic_vector(2 downto 0) := "110";
+
+-------------------------------------------------------------------------------------------------------------------------- 
+-- Individual DAC data registers
+constant ADR_DAC_DC0            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI0 & "000";   -- 
+constant ADR_DAC_DC1            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI0 & "001";   -- 
+constant ADR_DAC_DC2            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI0 & "010";   -- 
+constant ADR_DAC_DC3            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI0 & "011";   -- 
+constant ADR_DAC_DC4            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI0 & "100";   -- 
+constant ADR_DAC_DC5            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI0 & "101";   -- 
+constant ADR_DAC_DC6            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI0 & "110";   -- 
+constant ADR_DAC_DC7            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI0 & "111";   -- 
+
+constant ADR_DAC_DC8            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI1 & "000";   -- 
+constant ADR_DAC_DC9            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI1 & "001";   -- 
+
+-- constant ADR_DAC_DC6            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI2 & "000";   -- 
+-- constant ADR_DAC_DC7            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI2 & "001";   -- 
+-- etc. etc.
+-- constant ADR_DAC_DC6            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI3 & "110";   -- 
+-- constant ADR_DAC_DC7            : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_SPI3 & "111";   -- 
+constant ADR_DAC_DC30           : std_logic_vector(15 downto 0) := ADR_BASE_DC  & X"01E";   -- 
+constant ADR_DAC_DC31           : std_logic_vector(15 downto 0) := ADR_BASE_DC  & X"01F";   -- 
+
+constant ADR_DAC_DC_ALL         : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_CH_SPI_ALL & "000";     -- Write all channels 
+constant ADR_DAC_DC_IREF        : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_INTERNAL_REF & "000";   --  
+constant ADR_DAC_DC_POWER_ON    : std_logic_vector(15 downto 0) := ADR_BASE_DC  & "000000" & C_ADDR_POWER_ON & "000";       --  
+constant ADR_DAC_DC_STATUS      : std_logic_vector(15 downto 0) := ADR_BASE_DC  & X"000";                               -- Reading any address returns SPI interface busy status (this was 32 bit, but decleared as 16, so I changed to 16)
+
+
+-------------------------------------------------------------------------------------------------------------------------- 
+-- 'Pulse' DAC block registers. 
+-- The block has a set of block registers and contains 16 'channels'
+-- Each channel has a 40-bit memory to specify 24-bit time and a 16-bit level.
+-- Initially just using the MSB of the level to drive a single pin output 
+--
+-------------------------------------------------------------------------------------------------------------------------- 
+-- Block-level registers
+-- CPU_ADDR(11) = '0' selects local regs
+-- CPU_ADDR(11) = '1' selects the channel specified in reg_ctrl(3 :0)
+--               Then CPU_ADDR(10:1) selects RAM word address    (1024 address MAX)
+--					  CPU_ADDR(0) selects MSB or LSB of 40-bit RAM word (time or amplitude)
+-------------------------------------------------------------------------------------------------------------------------- 
+-- Addresses for block-level registers.
+------------------------------------------------------------------------------------------------------------------------- 
+constant ADR_DAC_PULSE_CTRL     : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"800";   -- 4:0 select channel RAM for CPU read/write.  Bit 8 is rising edge internal trigger
+constant ADR_DAC_PULSE_STATUS   : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"801";   -- R/O Level status for output of each channel
+constant ADR_DAC_PULSE_RUNTIME  : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"802";   -- Max time for pulse train
+constant ADR_DAC_PULSE_CH_EN    : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"803";   -- Enable bit for each individual channel
+constant ADR_DAC_PULSE_TIMER    : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"804";   -- R/O Current timer value (used by all channels)
+------------------------------------------------------------------------------------------------------------------------- 
+
+-------------------------------------------------------------------------------------------------------------------------- 
+-- Pulse Channel offsets
+-------------------------------------------------------------------------------------------------------------------------- 
+constant ADR_DAC_PULSE0         : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"000";   -- Base address of a 16-word x 40-bit RAM
+constant ADR_DAC_PULSE1         : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"040";   -- 
+constant ADR_DAC_PULSE2         : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"080";   -- 
+constant ADR_DAC_PULSE3         : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"0C0";   -- 
+--
+constant ADR_DAC_PULSE4         : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"100";   -- 
+constant ADR_DAC_PULSE5         : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"140";   -- 
+constant ADR_DAC_PULSE6         : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"180";   -- 
+constant ADR_DAC_PULSE7         : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"1C0";   -- 
+--
+constant ADR_DAC_PULSE8         : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"200";   -- 
+constant ADR_DAC_PULSE9         : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"240";   -- 
+constant ADR_DAC_PULSE10        : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"280";   -- 
+constant ADR_DAC_PULSE11        : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"2C0";   -- 
+--
+constant ADR_DAC_PULSE12        : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"300";   -- 
+constant ADR_ADC_PULSE13        : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"340";   -- 
+constant ADR_DAC_PULSE14        : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"380";   -- 
+constant ADR_DAC_PULSE15        : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"3C0";   -- 
+--
+-- etc. etc.
+constant ADR_DAC_PULSE28        : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"700";   -- 
+constant ADR_DAC_PULSE29        : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"740";   -- 
+constant ADR_DAC_PULSE30        : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"780";   -- 
+constant ADR_DAC_PULSE31        : std_logic_vector(15 downto 0) := ADR_BASE_PULSE  & X"7C0";   -- 
+
+
+
+-------------------------------------------------------------------------------------------------------------------------- 
+-- Misc block registers
+-------------------------------------------------------------------------------------------------------------------------- 
+constant ADR_MISC_VERSION       : std_logic_vector(15 downto 0) := ADR_BASE_MISC & X"000";   -- HDL code version
+constant ADR_MISC_LEDS          : std_logic_vector(15 downto 0) := ADR_BASE_MISC & X"001";   -- LEDs
+constant ADR_MISC_LEDS_EN       : std_logic_vector(15 downto 0) := ADR_BASE_MISC & X"002";   -- LEDs enable
+constant ADR_MISC_SW_IN         : std_logic_vector(15 downto 0) := ADR_BASE_MISC & X"003";   -- Read board switch settings (if present)
+constant ADR_MISC_DEBUG_CTRL    : std_logic_vector(15 downto 0) := ADR_BASE_MISC & X"004";   -- Select debug output from top level to pins
+
+
+end package;
+
+package body qlaser_pkg is
+
+end package body;
+

src/hdl/sandbox/qlaser_dacs_pulse_channel.vhdl

@@ -0,0 +1,606 @@
+---------------------------------------------------------------
+--  File         : qlaser_dacs_pulse_channel.vhd
+--  Description  : Single channel of pulse output
+----------------------------------------------------------------
+library ieee;
+use     ieee.std_logic_1164.all;
+use     ieee.numeric_std.all;
+
+use     work.qlaser_pkg.all;
+
+entity qlaser_dacs_pulse_channel is
+port (
+    reset               : in  std_logic;
+    clk                 : in  std_logic; 
+
+    enable              : in  std_logic;                        -- Set when DAC interface is running
+    start               : in  std_logic;                        -- Set when pulse generation sequence begins (trigger)
+    cnt_time            : in  std_logic_vector(23 downto 0);    -- Time since trigger.
+
+    busy                : out std_logic;                        -- Status signal
+
+    -- CPU interface
+    cpu_addr            : in  std_logic_vector( 9 downto 0);    -- Address input
+    cpu_wdata           : in  std_logic_vector(31 downto 0);    -- Data input
+    cpu_wr              : in  std_logic;                        -- Write enable 
+    cpu_sel             : in  std_logic;                        -- Block select
+    cpu_rdata           : out std_logic_vector(31 downto 0);    -- Data output
+    cpu_rdata_dv        : out std_logic;                        -- Acknowledge output
+     
+    -- AXI-stream output
+    axis_tready         : in  std_logic;                        -- axi_stream ready from downstream module
+    axis_tdata          : out std_logic_vector(15 downto 0);    -- axi stream output data
+    axis_tvalid         : out std_logic;                        -- axi_stream output data valid
+    axis_tlast          : out std_logic                         -- axi_stream output set on last data  
+);
+end entity;
+
+
+----------------------------------------------------------------
+-- Single channel pulse generator with two RAMs and a FIFO
+----------------------------------------------------------------
+architecture rtl of qlaser_dacs_pulse_channel is
+
+-- RAM, pulse position, CPU port, read/write
+constant C_NUM_PULSE        : integer   := 16;                                    -- Number of output data values from pulse RAM (16x24-bit)
+signal ram_pulse_addra      : std_logic_vector( 3 downto 0);                      -- 16 entry RAM
+signal ram_pulse_dina       : std_logic_vector(95 downto 0);
+signal ram_pulse_douta      : std_logic_vector(95 downto 0);
+signal ram_pulse_douta_d1   : std_logic_vector(95 downto 0);                      -- Delay distrib RAM output to match pipeline of Block RAM
+signal ram_pulse_we         : std_logic;
+
+-- RAM, pulse position, from state machine
+constant C_BITS_GAIN_FACTOR : integer   := 16;                                    -- Number of bits in gain table
+constant C_BITS_TIME_FACTOR : integer   := 16;                                    -- Number of bits in time table
+constant C_BITS_TIME_INT    : integer   := 14;                                    -- Starting bit for time integer part of the time factor, counting from MSB
+constant C_BITS_TIME_FRAC   : integer   :=  5;                                    -- Starting bit for time fractional part of the time factor, counting from MSB
+constant C_BITS_ADDR_START  : integer   := 10;                                    -- Number of bits for starting address
+constant C_BITS_ADDR_LENGTH : integer   := 10;                                    -- Number of bits for length address used by an edge of a pulse
+constant C_BITS_ADDR_TOP    : integer   := 17;                                    -- Number of bits for the "flat top", the top of the pulse
+signal cnt_wave_top         : std_logic_vector( C_BITS_ADDR_TOP - 1 downto 0);    -- Counter for the top of the waveform
+signal ram_pulse_addrb      : std_logic_vector( 3 downto 0);
+signal ram_pulse_doutb      : std_logic_vector(95 downto 0);
+
+signal cpu_rdata_dv_e1      : std_logic;
+signal cpu_rdata_dv_e2      : std_logic;
+signal cpu_rdata_ramsel_d1  : std_logic;
+signal cpu_rdata_ramsel_d2  : std_logic;
+
+signal cpu_wdata_top        : std_logic_vector(31 downto 0);                      -- Top 32 bits of CPU write data (95:64)
+signal cpu_wdata_mid        : std_logic_vector(31 downto 0);                      -- Middle 32 bits of CPU write data (63:32)
+
+-- Waveform RAM port connections. 
+-- NOTE: Port A is 32-bit data, port B is 16-bit
+constant C_LENGTH_WAVEFORM  : integer   := 1024;                                  -- Number of output data values from waveform RAM (1024x16-bit)
+constant C_BITS_ADDR_WAVE   : integer   := 10;                                    -- Number of bits in address for waveform RAM
+signal ram_waveform_ena     : std_logic;
+signal ram_waveform_wea     : std_logic_vector( 0 downto 0);
+signal ram_waveform_addra   : std_logic_vector( 8 downto 0);
+signal ram_waveform_dina    : std_logic_vector(31 downto 0);
+signal ram_waveform_douta   : std_logic_vector(31 downto 0);
+
+signal ram_waveform_enb     : std_logic := '0';
+signal ram_waveform_web     : std_logic_vector( 0 downto 0) := (others=>'0');
+signal ram_waveform_addrb   : std_logic_vector( 9 downto 0);
+signal ram_waveform_dinb    : std_logic_vector(15 downto 0) := (others=>'0');
+signal ram_waveform_doutb   : std_logic_vector(15 downto 0);
+
+
+-- State variable type declaration for main state machine
+type t_sm_state  is (
+    S_RESET,    -- Wait for 'enable'. Stay here until JESD interface is up and running,
+    S_IDLE,     -- Wait for 'start'
+    S_WAIT,     -- Wait for cnt_time, external input, to match pulse position RAM output
+    S_WAVE_UP,  -- Output the rising edge of a waveform
+    S_WAVE_FLAT,-- Output the flat top part of a waveform
+    S_WAVE_DOWN -- Output the falling edge of a waveform
+);
+signal sm_state             : t_sm_state;
+signal sm_wavedata          : std_logic_vector(15 downto 0);    -- Waveform RAM data
+signal sm_wavedata_dv       : std_logic;    -- Signal to indicate that waveform RAM data is valid
+signal sm_busy              : std_logic;    -- Signal to indicate that s.m. is not idle
+
+
+---- FIFO port connections
+--signal fifo_wr_en           : std_logic;
+--signal fifo_full            : std_logic;
+--signal fifo_empty           : std_logic;
+--signal fifo_wr_rst_busy     : std_logic;
+--signal fifo_rd_rst_busy     : std_logic;
+--signal fifo_rd_en           : std_logic;
+---- FIFO status signals for debug purpose
+--signal fifo_wr_ack          : std_logic;
+--signal fifo_overflow        : std_logic;
+--signal fifo_valid           : std_logic;
+--signal fifo_underflow       : std_logic;
+
+-- Pipeline delays
+signal start_d1             : std_logic;
+signal enable_d1            : std_logic;
+
+begin
+
+    busy    <= sm_busy;
+
+    ----------------------------------------------------------------
+    -- Distributed RAM to hold 16 24-bit Pulse start times.
+    -- Synch write, Asynch read
+    -- Port A is for CPU read/write. 16x24-bit
+    -- Port B is for pulse time data output. 16x24-bit
+    ----------------------------------------------------------------
+    u_ram_pulse : entity work.bram_pulseposition
+    port map(
+        clk        => clk               ,   -- input std_logic
+        a          => ram_pulse_addra   ,   -- input slv[3:0]
+        d          => ram_pulse_dina    ,   -- input slv[95 downto 0]
+        we         => ram_pulse_we      ,
+        spo        => ram_pulse_douta   ,   -- output slv(95 downto 0]
+         
+        dpra       => ram_pulse_addrb   ,   -- input slv[3:0]
+        dpo        => ram_pulse_doutb       -- output slv(95 downto 0)
+    );
+    
+    
+    ----------------------------------------------------------------
+    -- Waveform table Block RAM.
+    -- Synch write, Synch read
+    -- Port A is for CPU read/write. 512x32-bit
+    -- Port B is for waveform data.  1024x16-bit
+    ----------------------------------------------------------------
+    u_ram_waveform : entity work.bram_waveform
+    port map (
+        -- Port A CPU Bus
+        clka        => clk                ,   -- input  std_logic
+        ena         => ram_waveform_ena   ,   -- input  std_logic
+        wea         => ram_waveform_wea   ,   -- input  slv(0 downto 0)
+        addra       => ram_waveform_addra ,   -- input  slv(8 downto 0)
+        dina        => ram_waveform_dina  ,   -- input  slv(31 downto 0)
+        douta       => ram_waveform_douta ,   -- output slv(31 downto 0)
+        
+        -- Port B waveform output
+        clkb        => clk                ,   -- input  std_logic
+        enb         => ram_waveform_enb   ,   -- input  std_logic
+        web         => (others=>'0')      ,   -- input  slv(0 downto 0)
+        addrb       => ram_waveform_addrb ,   -- input  slv(9 downto 0)
+        dinb        => (others=>'0')      ,   -- input  slv(15 downto 0)
+        doutb       => ram_waveform_doutb     -- output slv(15 downto 0)
+    );
+    
+    
+
+    ----------------------------------------------------------------
+    -- State machine: 
+    -- Compares cnt_time input against current output from pulse position RAM.
+    -- When values match iti incremnts the pulse postion RAM address to 
+    -- retrieve the next pulse position and also starts reading the 
+    -- entire waveform table, one value every clock cycle, until it reaches the end.
+    -- Once the pulse is complete it waits for the next cnt_time match.
+    -- Repeat until all pulse position RAM times have triggered a pulse output 
+    -- or until the maximum counter time has been reached.
+    ----------------------------------------------------------------
+    pr_sm : process (reset, clk)
+    -- TODO: those bitwidth are not correct, we could optimize it later and find out how many bits each variable should be. But for now just make it big
+    variable v_flattop            : std_logic_vector(C_BITS_ADDR_TOP    - 1 downto 0);  -- wait times (flat_top), managed by an internal counter process sm_top_counter unter state S_WAVE_TOP
+    variable v_addr_length        : std_logic_vector(C_BITS_ADDR_LENGTH - 1 downto 0);  -- number of points/addresses used by the pulse edge, the bit width should increase with the amount of addresses the wavetable has
+    variable v_addr_start         : std_logic_vector(C_BITS_ADDR_START  - 1 downto 0);  -- start address of the pulse edge data in the Waveform RAM, the bit width should increase with the amount of address the wavetable has.
+    variable v_addr_end           : std_logic_vector(C_BITS_ADDR_START  - 1 downto 0);  -- end address of the pulse edge data in the Waveform RAM, the bit width should align with the bit width of v_addr_start
+    variable v_amplitude_factor   : std_logic_vector(C_BITS_GAIN_FACTOR - 1 downto 0);  -- pulse edge amplitude scale factor
+    variable v_time_factor        : std_logic_vector(C_BITS_TIME_FACTOR - 1 downto 0);  -- pulse edge time scale factor
+    variable v_cnt_time           : std_logic_vector(23 downto 0);                      -- counter for the time, the bit width should increase with the amount of addresses the wavetable has
+    
+    variable v_ram_waveform_addrb : unsigned(95 downto 0);
+    begin
+        if (reset = '1') then
+
+            sm_state            <= S_IDLE;  -- TODO: Eric: Should this be S_RESET since we reset the JEDS interface as well?
+            ram_pulse_addrb     <= (others=>'0');
+            ram_waveform_addrb  <= (others=>'0');
+
+            sm_wavedata         <= (others=>'0');
+            sm_wavedata_dv      <= '0';
+            sm_busy             <= '0';
+            ram_waveform_enb    <= '0';
+
+        elsif rising_edge(clk) then
+
+            -- Pipeline delays to use for rising edge detection
+            enable_d1       <= enable;  
+            start_d1        <= start;  
+
+            -- Default 
+            sm_wavedata     <= (others=>'0');
+            sm_wavedata_dv  <= '0';
+
+            -- Actively read pulse definition RAM and update the variables
+            v_flattop          := ram_pulse_doutb(C_BITS_ADDR_TOP - 1                                                                                         downto 0);
+            v_addr_length      := ram_pulse_doutb(C_BITS_ADDR_LENGTH + C_BITS_ADDR_TOP - 1                                                                    downto C_BITS_ADDR_TOP);
+            v_addr_start       := ram_pulse_doutb(C_BITS_ADDR_START + C_BITS_ADDR_LENGTH + C_BITS_ADDR_TOP - 1                                                downto C_BITS_ADDR_LENGTH + C_BITS_ADDR_TOP);
+            v_addr_end         := std_logic_vector(unsigned(v_addr_start) + unsigned(v_addr_length) - 1);
+            v_amplitude_factor := ram_pulse_doutb(C_BITS_GAIN_FACTOR + C_BITS_ADDR_START + C_BITS_ADDR_LENGTH + C_BITS_ADDR_TOP - 1                           downto C_BITS_ADDR_START + C_BITS_ADDR_LENGTH + C_BITS_ADDR_TOP);
+            v_time_factor      := ram_pulse_doutb(C_BITS_TIME_FACTOR + C_BITS_GAIN_FACTOR + C_BITS_ADDR_START + C_BITS_ADDR_LENGTH + C_BITS_ADDR_TOP - 1      downto C_BITS_GAIN_FACTOR + C_BITS_ADDR_START + C_BITS_ADDR_LENGTH + C_BITS_ADDR_TOP);
+            v_cnt_time         := ram_pulse_doutb(24 + C_BITS_TIME_FACTOR + C_BITS_GAIN_FACTOR + C_BITS_ADDR_START + C_BITS_ADDR_LENGTH + C_BITS_ADDR_TOP - 1 downto C_BITS_TIME_FACTOR + C_BITS_GAIN_FACTOR + C_BITS_ADDR_START + C_BITS_ADDR_LENGTH + C_BITS_ADDR_TOP);
+
+            ------------------------------------------------------------------------
+            -- Main state machine
+            ------------------------------------------------------------------------
+            case sm_state is
+
+                ------------------------------------------------------------------------
+                -- Wait for rising edge of enable
+                -- This is set when the JESD interface is aligned and functional.
+                -- Send a zero value to initialize the DAC then go to idle.
+                ------------------------------------------------------------------------
+                when  S_RESET   =>
+
+                    if (enable = '1') and (enable_d1 = '0') then
+                        sm_wavedata     <= (others=>'0');
+                        sm_wavedata_dv  <= '1'; 
+                        sm_state        <= S_IDLE;
+                    end if;
+                    sm_busy             <= '0';
+                    ram_waveform_enb    <= '0';
+
+
+                ------------------------------------------------------------------------
+                -- Wait for rising edge of 'start'.
+                -- No data output.
+                ------------------------------------------------------------------------
+                when  S_IDLE    =>
+
+                    if (start = '1') and (start_d1 = '0') then
+                        sm_state    <= S_WAIT;
+                        sm_busy     <= '1';
+                    else
+                        sm_busy     <= '0';
+                    end if;
+
+                    ram_waveform_enb    <= '0';
+
+                ------------------------------------------------------------------------
+                -- Wait for cnt_time, external input, to match pulse position RAM output
+                -- Return to idle state if max time is reached. Output waveform value zero. 
+                ------------------------------------------------------------------------
+                when  S_WAIT    =>
+
+                    -- Start to output wave and increment pulse position RAM address
+                    if (v_cnt_time = cnt_time) then
+                        sm_state            <= S_WAVE_UP;
+                        -- set the wavetable's address to the starting address defined from the pulse ram
+                        ram_waveform_addrb  <= v_addr_start;
+                    elsif (cnt_time = X"FFFFFF") then
+                        sm_state        <= S_IDLE;
+                    end if;
+
+                    ram_waveform_enb    <= '1';
+                ------------------------------------------------------------------------
+                -- Output the raising edge of a waveform
+                -- Hold the last address when complete
+                ------------------------------------------------------------------------
+                when  S_WAVE_UP =>
+                    -- Check if is end of rise of the waveform, and hold the address
+                    if (ram_waveform_addrb = v_addr_end) then
+                        sm_state            <= S_WAVE_FLAT;
+                        -- initialize the counter for the flat top of the waveform
+                        cnt_wave_top <= std_logic_vector(to_unsigned(0, C_BITS_ADDR_TOP));
+                    else
+                        -- Output waveform from RAM , and increment the address
+                        -- TODO: apply scaling factor to the address and then to the output
+                        ram_waveform_addrb  <= std_logic_vector(unsigned(ram_waveform_addrb) + 1);
+                    end if;    
+                    sm_wavedata         <= ram_waveform_doutb; 
+                    sm_wavedata_dv      <= '1';  
+                    
+                ------------------------------------------------------------------------
+                -- Hold the last address and output its data
+                -- decrement from this address when finished waiting
+                ------------------------------------------------------------------------
+                when S_WAVE_FLAT =>
+                    if (cnt_wave_top = v_flattop) then
+                        sm_state            <= S_WAVE_DOWN;
+                    else
+                        cnt_wave_top <= std_logic_vector(unsigned(cnt_wave_top) + 1);
+                    end if;    
+                    sm_wavedata         <= ram_waveform_doutb; 
+                    sm_wavedata_dv      <= '1'; 
+                    
+                ------------------------------------------------------------------------
+                -- Output the falling edge of a waveform
+                -- Hold the start address when complete
+                ------------------------------------------------------------------------
+                when S_WAVE_DOWN =>
+                    
+                -- End of waveform?
+                    if (ram_waveform_addrb = v_addr_start) then
+
+                        -- If the end of the pulse table is reached then go to idle
+                        if (ram_pulse_addrb = std_logic_vector(to_unsigned(C_NUM_PULSE-1,4))) then
+                            ram_pulse_addrb     <= (others=>'0');
+                            sm_state            <= S_IDLE;
+
+                        else    -- increment pulse address for the next waveform
+                            ram_pulse_addrb     <= std_logic_vector(unsigned(ram_pulse_addrb) + 1);
+                            sm_state            <= S_WAIT;
+                        end if;
+                            
+                    -- Output waveform from RAM with decremented address
+                    else
+                        ram_waveform_addrb  <= std_logic_vector(unsigned(ram_waveform_addrb) - 1);
+                    end if;
+                    sm_wavedata         <= ram_waveform_doutb; 
+                    sm_wavedata_dv      <= '1'; 
+
+                ------------------------------------------------------------------------
+                -- Default
+                ------------------------------------------------------------------------
+                when others =>
+                        sm_state            <= S_IDLE;
+
+            end case;
+        end if;
+
+    end process;
+
+    -- AXI-Stream output.
+    -- TBD: This should come from a FIFO
+    -- TODO: the bits are not correct, should be top bits (C_BITS_GAIN_FACTOR + 16 downto C_BITS_GAIN_FACTOR), but for now just make it this way so modelsim can simulate
+    -- TODO: apply scaling factor to the output
+    axis_tdata          <= sm_wavedata;         -- axi stream output data, this output should be multiplied by the gain factor, then take the top 16 bits
+    axis_tvalid         <= sm_wavedata_dv;      -- axi_stream output data valid
+
+    -- TBD : Generate in state machine?
+    axis_tlast          <= '0';                 -- axi_stream output last 
+
+
+    ----------------------------------------------------------------
+    -- **** TBD : ADD FIFO ****
+    ----------------------------------------------------------------
+    -- FIFO for waveform data
+    -- connect to external output to whatever we want to connect
+    ----------------------------------------------------------------
+    --u_data_to_stream : entity work.fifo_data_to_stream
+    --port map (
+    --    clk         => clk,                -- input std_logic
+    --    srst        => reset,              -- input std_logic
+    --    rd_en       => fifo_rd_en,         -- input std_logic
+    --    wr_en       => fifo_wr_en,         -- input std_logic
+    --    empty       => fifo_empty,         -- output std_logic
+    --    full        => fifo_full,          -- output std_logic
+    --    din         => ram_waveform_doutb, -- input slv(15 downto 0)
+    --    dout        => fifo_dout,          -- output slv(15 downto 0)
+    --    
+    --    -- FIFO signals, some of then are for debug purpose
+    --    wr_ack      => fifo_wr_ack,        -- output std_logic
+    --    overflow    => fifo_overflow,      -- output std_logic
+    --    valid       => fifo_valid,         -- output std_logic
+    --    underflow   => fifo_underflow,     -- output std_logic
+    --    wr_rst_busy => fifo_wr_rst_busy,   -- output std_logic
+    --    rd_rst_busy => fifo_rd_rst_busy    -- output std_logic
+    --);
+
+
+    ----------------------------------------------------------------
+    -- CPU Read/Write RAM
+    -- MSB of cpu_addr is used to select one of the two RAMs 
+    -- to read/write, and the remainder are a  9-bit or 4-bit RAM address.
+    ----------------------------------------------------------------
+    pr_ram_rw  : process (reset, clk)
+    begin
+        if (reset = '1') then
+        
+            ram_pulse_addra     <= (others=>'0');
+            ram_pulse_dina      <= (others=>'0');
+            ram_pulse_we        <= '0';
+
+            ram_waveform_ena    <= '0';
+            ram_waveform_wea    <= (others=>'0');
+            ram_waveform_addra  <= (others=>'0');
+            ram_waveform_dina   <= (others=>'0');
+
+            cpu_rdata           <= (others=>'0');
+            cpu_rdata_dv        <= '0';
+            cpu_rdata_dv_e1     <= '0';
+            cpu_rdata_dv_e2     <= '0';
+            cpu_rdata_ramsel_d1 <= '0';
+            cpu_rdata_ramsel_d2 <= '0';
+            
+        elsif rising_edge(clk) then
+        
+            ram_waveform_ena    <= '0';
+
+            -------------------------------------------------
+            -- CPU writing RAM
+            -------------------------------------------------
+            if (cpu_wr = '1') and (cpu_sel = '1') then
+            
+                -- 0 for pulse position, 1 for waveform table
+                if (cpu_addr(9) = '1') then
+
+                    ram_pulse_addra     <= (others=>'0');
+                    ram_pulse_dina      <= (others=>'0');
+                    ram_pulse_we        <= '0';
+
+                    ram_waveform_wea(0) <= '1';
+                    ram_waveform_ena    <= '1';
+                    ram_waveform_addra  <= cpu_addr(8 downto 0);
+                    ram_waveform_dina   <= cpu_wdata;
+
+                else
+
+                    ram_pulse_addra     <= cpu_addr(5 downto 2);
+                    -- select which part of the 96-bit data to write
+                    if (cpu_addr(1 downto 0) = "00") then
+                        ram_pulse_dina(31 downto 0)  <= cpu_wdata;
+                    elsif (cpu_addr(1 downto 0) = "01") then
+                        ram_pulse_dina(63 downto 32) <= cpu_wdata;
+                    elsif (cpu_addr(1 downto 0) = "10") then
+                        ram_pulse_dina(95 downto 64) <= cpu_wdata;
+                        ram_pulse_we                 <= '1';  -- Write on the thrid cycle
+                    end if;
+                    
+
+                    ram_waveform_ena    <= '0';
+                    ram_waveform_wea    <= (others=>'0');
+                    ram_waveform_addra  <= (others=>'0');
+                    ram_waveform_dina   <= (others=>'0');
+
+                end if;
+                    
+                cpu_rdata_dv_e1     <= '0';
+                cpu_rdata_dv_e2     <= '0';
+                cpu_rdata_ramsel_d1 <= '0';
+                cpu_rdata_ramsel_d2 <= '0';
+
+            
+            -------------------------------------------------
+            -- CPU read
+            -------------------------------------------------
+            elsif (cpu_wr = '0') and (cpu_sel = '1') then
+                
+                if (cpu_addr(9) = '1') then -- Waveform
+                    ram_waveform_ena    <= '1';
+                    ram_pulse_addra     <= (others=>'0');
+                    ram_waveform_addra  <= cpu_addr(8 downto 0);
+                else                        -- Pulse
+                    ram_pulse_addra     <= cpu_addr(5 downto 2);
+                    ram_pulse_douta_d1  <= ram_pulse_douta;         -- Delay distrib RAM output to match pipeline of Block RAM
+                    ram_waveform_addra  <= (others=>'0');
+                end if;
+
+                ram_pulse_we        <= '0';
+                ram_waveform_wea(0) <= '0';
+                
+                cpu_rdata_dv_e2     <= '1';             -- DV for cycle, when RAM output occurs
+                cpu_rdata_dv_e1     <= cpu_rdata_dv_e2; -- DV for next cycle
+                cpu_rdata_ramsel_d1 <= cpu_addr(9);     -- Save the select bit one cycle later
+                cpu_rdata_ramsel_d2 <= cpu_rdata_ramsel_d1;  
+                    
+            else
+                ram_pulse_addra     <= (others=>'0');
+                ram_pulse_we        <= '0';
+                ram_waveform_addra  <= (others=>'0');
+                ram_waveform_wea(0) <= '0';
+
+                cpu_rdata_dv_e2     <= '0';
+                cpu_rdata_dv_e1     <= cpu_rdata_dv_e2; -- DV for next cycle
+                cpu_rdata_ramsel_d1 <= '0';
+                cpu_rdata_ramsel_d2 <= cpu_rdata_ramsel_d1;  
+            
+            end if;
+            
+            -------------------------------------------------
+            -- Output the delayed RAM data
+            -- This adds a pipeline delay to the cpu_rdata_dv to account for
+            -- the delay in reading data from the RAM
+            -------------------------------------------------
+            if (cpu_rdata_dv_e1 = '1') then
+                    
+                cpu_rdata_dv    <= '1';
+                
+                -- Select source of output data
+                if (cpu_rdata_ramsel_d2 = '1') then   -- Output is from waveform table
+                    cpu_rdata   <= ram_waveform_douta;
+
+                elsif (cpu_rdata_ramsel_d2 = '0') then
+                    -- cpu_rdata   <= X"00" & ram_pulse_douta_d1;
+                    -- select which part of the 96-bit data to read
+                    if (cpu_addr(1 downto 0) = "00") then
+                        cpu_rdata <= ram_pulse_douta_d1(31 downto 0);
+                    elsif (cpu_addr(1 downto 0) = "01") then
+                        cpu_rdata <= ram_pulse_douta_d1(63 downto 32);
+                    elsif (cpu_addr(1 downto 0) = "10") then
+                        cpu_rdata <= ram_pulse_douta_d1(95 downto 64);
+
+                    end if;
+                end if;
+
+            else
+                cpu_rdata       <= (others=>'0');
+                cpu_rdata_dv    <= '0';
+            end if;
+            
+        end if;
+        
+    end process;
+
+
+--      ----------------------------------------------------------------
+--      -- Read time from RAM to generate pulses
+--      -- When input cnt_time equals RAM time output then set dout
+--      -- to RAM amplitude output and read next set of RAM data.
+--      -- Keep reading waveform RAM every clock cycle until the end of the RAM 
+--      ----------------------------------------------------------------
+--      pr_ram_pulse  : process(reset, clk)
+--      begin
+--          if (reset = '1') then
+--          
+--              ram_pulse_addrb     <= (others => '0');
+--              start_pulse         <= '0';
+--              dout_dv             <= '0';
+--  
+--          elsif rising_edge(clk) then
+--  
+--              -- dout     <= ram_amplitude;
+--              
+--              if (cnt_time = X"000000") then  -- Not triggered
+--                  ram_pulse_addrb <= (others=>'0');
+--                  dout_dv         <= '0';
+--                  start_pulse     <= '0';
+--                  
+--              elsif (ram_time = cnt_time) then
+--  
+--                  ram_pulse_addrb <= std_logic_vector(unsigned(ram_pulse_addrb) + 1);
+--                  dout_dv         <= '1';
+--                  start_pulse     <= '1';
+--                  
+--              else
+--                  dout_dv         <= '0';
+--                  start_pulse     <= '0';
+--              end if;
+--  
+--          end if;
+--           
+--      end process;
+--  
+--  
+--      ----------------------------------------------------------------
+--      -- Read amplitude from Waveform RAM to generate pulses
+--      -- When start_pulse is asserted, and when FIFO is not full, write
+--      -- amplitude to FIFO.
+--      ----------------------------------------------------------------
+--      pr_ram_wavetable : process(reset, clk)
+--      begin
+--          if (reset = '1') then
+--              fifo_wr_en         <= '0';
+--              ram_waveform_addrb <= (others => '0');
+--              ram_waveform_enb   <= '0';
+--              busy               <= '0';
+--          elsif rising_edge(clk) then
+--              if (read_table = '1') then  -- start_pulse get asserted
+--                  busy               <= '1';
+--                  -- TODO EricToGeoff   : This condition may not satisfy all cases of a fifo_ready, maybe also utilize fifo_wr_ack or just a simple FSM?
+--                  if (fifo_full = '0') then
+--                      fifo_wr_en         <= '1';
+--                      ram_waveform_addrb <= std_logic_vector(unsigned(ram_waveform_addrb) + 1);
+--                      ram_waveform_enb   <= '1';
+--                  else
+--                      fifo_wr_en <= '0';
+--                      -- FIFO is full, wait
+--                      ram_waveform_addrb <= ram_waveform_addrb;
+--                      ram_waveform_enb   <= '0';
+--                  end if;
+--              else
+--                  fifo_wr_en         <= '0';
+--                  ram_waveform_addrb <= (others => '0');
+--                  ram_waveform_enb   <= '0';
+--              end if;
+--          end if;
+--  
+--      end process;
+--      
+--      -- For new versions, ram_doutb are differnt RAMs b port outputs, ram_amplitude should go thought a FIFO first from RAM
+--      ram_time        <= ram_doutb;
+--      read_table      <= start_pulse;
+--  
+--      fifo_rd_en      <= axi_tready and fifo_full;
+
+end rtl;

src/hdl/sandbox/tb_cpubus_dacs_pulse_channel.vhdl

@@ -0,0 +1,395 @@
+-----------------------------------------------------------
+-- File : tb_cpubus_dacs_pulse_channel.vhd
+-----------------------------------------------------------
+-- 
+-- Testbench for CPU bus peripheral.
+--
+--  Description  : Pulse output control of Qlaser FPGA
+--                 Block drives AXI-stream to JESD DACs
+--
+----------------------------------------------------------
+library ieee;
+use     ieee.numeric_std.all;
+use     ieee.std_logic_1164.all; 
+use     std.textio.all; 
+
+use     work.std_iopak.all;
+
+
+entity tb_cpubus_dacs_pulse_channel is
+end    tb_cpubus_dacs_pulse_channel;
+
+architecture behave of tb_cpubus_dacs_pulse_channel is 
+
+signal clk                          : std_logic;
+signal reset                        : std_logic;
+signal enable                       : std_logic;  
+signal start                        : std_logic;  
+signal cnt_time                     : std_logic_vector(23 downto 0);  
+signal busy                         : std_logic;  
+signal cpu_wr                       : std_logic;
+signal cpu_sel                      : std_logic;
+signal cpu_addr                     : std_logic_vector(15 downto 0);
+signal cpu_wdata                    : std_logic_vector(31 downto 0);
+signal cpu_rdata                    : std_logic_vector(31 downto 0);
+signal cpu_rdata_dv                 : std_logic; 
+
+-- AXI-stream output interface
+signal axis_tready                  : std_logic := '1'; -- Always ready
+signal axis_tdata                   : std_logic_vector(15 downto 0);
+signal axis_tvalid                  : std_logic;
+signal axis_tlast                   : std_logic;
+
+-- Halts simulation by stopping clock when set true
+signal sim_done                     : boolean   := false;
+
+-- Crystal clock freq expressed in MHz
+constant CLK_FREQ_MHZ               : real      := 100.0; 
+-- Clock period
+constant CLK_PER                    : time      := integer(1.0E+6/(CLK_FREQ_MHZ)) * 1 ps;
+
+-- Block registers
+constant ADR_RAM_PULSE              : integer   :=  0;    -- base address for pulse RAM, TODO: this constant should eventually go to qlaser_pkg
+constant ADR_RAM_WAVE               : integer   :=  512;    -- 
+
+
+
+
+-------------------------------------------------------------
+-- CPU write procedure. Address in decimal. Data in hex
+-------------------------------------------------------------
+procedure cpu_write( 
+    signal clk          : in  std_logic;
+    constant a          : in  integer;
+    constant d          : in  std_logic_vector(31 downto 0);
+    signal cpu_sel      : out std_logic;
+    signal cpu_wr       : out std_logic;
+    signal cpu_addr     : out std_logic_vector(15 downto 0);
+    signal cpu_wdata    : out std_logic_vector(31 downto 0)
+) is
+begin
+    wait until clk'event and clk='0';
+    cpu_sel     <= '1';
+    cpu_wr      <= '1';
+    cpu_addr    <= std_logic_vector(to_unsigned(a, 16));
+    cpu_wdata   <= std_logic_vector(d);
+    wait until clk'event and clk='0';
+    cpu_sel     <= '0';
+    cpu_wr      <= '0';
+    cpu_addr    <= (others=>'0');
+    cpu_wdata   <= (others=>'0');
+    wait until clk'event and clk='0';
+end;
+
+-------------------------------------------------------------
+-- CPU write pulse definition RAM
+-- Use 96 bit data to make three 32-bit writes
+-------------------------------------------------------------
+procedure cpu_write_pulsedef(
+    signal clk              : in  std_logic;
+
+    constant num_entry      : in  integer;
+
+    -- TODO: Partial ? list of parameters
+    constant pulsetime      : in  integer;  -- Pulse time in clock cycles
+    constant timefactor     : in  real;     -- Fixed point time scale factor
+    constant gainfactor     : in  real;     -- Fixed point gain value. Max value 1.0 is hex X"8000". Gain 0.5 is therefore X"4000"
+    constant wavestartaddr  : in  integer;  -- Start address in waveform RAM
+    constant wavesteps      : in  integer;  -- Number of steps in waveform rise and fall
+    constant wavetopwidth   : in  integer;  -- Number of clock cycles in waveform top between end of rise and start of fall
+    
+
+    signal cpu_sel          : out std_logic;
+    signal cpu_wr           : out std_logic;
+    signal cpu_addr         : out std_logic_vector(15 downto 0);
+    signal cpu_wdata        : out std_logic_vector(31 downto 0)
+) is
+-- Vectors for converted values
+variable slv_pulsetime      : std_logic_vector(26 downto 0);  -- For 27-bit pulse time
+variable slv_timefactor     : std_logic_vector(15 downto 0);  -- For 16-bit fixed point timestep
+variable slv_gainfactor     : std_logic_vector(15 downto 0);  -- For 16-bit fixed point gain
+variable slv_wavestartaddr  : std_logic_vector(11 downto 0);  -- For 12-bit address i.e. 1024 point waveform RAM
+variable slv_wavesteps      : std_logic_vector( 9 downto 0);  -- For 10-bit number of steps i.e. 0 = 1 step, X"3FF" = 1024 points
+variable slv_wavetopwidth   : std_logic_vector(16 downto 0);  -- For 17-bit number of clock cycles in top of waveform
+
+variable slv_entry_data     : std_logic_vector(95 downto 0);  -- Vector for entire memory entry
+
+-- constant ADR_PULSE_DEF      : integer :=  to_integer(unsigned(X"?????"));    -- Use address of pulse definition RAM from qlaser_pkg
+-- Define the number of fractional bits
+constant BIT_FRAC : integer := 4;  -- TODO: this should be defined in qlaser_pkg
+begin
+
+    -- Convert each field into its std_logic_vector equivalent
+    slv_pulsetime     := std_logic_vector(to_unsigned(pulsetime, 27));
+    slv_timefactor    := std_logic_vector(to_unsigned(integer(timefactor * real(2**BIT_FRAC)), 16));  -- Convert real to std_logic_vector keeping the fractional part
+    slv_gainfactor    := std_logic_vector(to_unsigned(integer(gainfactor * real(2**BIT_FRAC)), 16));  -- Convert real to std_logic_vector keeping the fractional part
+    slv_wavestartaddr := std_logic_vector(to_unsigned(wavestartaddr, 12));
+    slv_wavesteps     := std_logic_vector(to_unsigned(wavesteps, 10));
+    slv_wavetopwidth  := std_logic_vector(to_unsigned(wavetopwidth, 17));
+    
+    
+    --etc, etc.
+
+    -- Build full entry out of component fields. Final length should be 96 bits.
+    -- slv_entry_data  := "000" & slv_pulsetime & slv_timefactor & slv_gainfactor & slv_wavestartaddr & slv_wavesteps & slv_wavetopwidth;   -- This might not correct
+
+    -- -- Write 96-bit entry in 3 writes.  (Address is an integer)
+    -- cpu_write(clk, ADR_RAM_PULSE+(4*num_entry)   , slv_entry_data(31 downto  0), cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+    -- cpu_write(clk, ADR_RAM_PULSE+(4*num_entry)+1 , slv_entry_data(63 downto 32), cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+    -- cpu_write(clk, ADR_RAM_PULSE+(4*num_entry)+2 , slv_entry_data(95 downto 64), cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+    -- Write 32-bit entry in 
+end;
+
+-------------------------------------------------------------
+-- CPU write procedure. Address and Data in decimal
+-------------------------------------------------------------
+procedure cpu_write( 
+    signal clk          : in  std_logic;
+    constant a          : in  integer;
+    constant d          : in  integer;
+    signal cpu_sel      : out std_logic;
+    signal cpu_wr       : out std_logic;
+    signal cpu_addr     : out std_logic_vector(15 downto 0);
+    signal cpu_wdata    : out std_logic_vector(31 downto 0)
+) is
+begin
+    cpu_write(clk, a , std_logic_vector(to_unsigned(d,32)), cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+end;
+
+
+-------------------------------------------------------------
+-- CPU read procedure
+-------------------------------------------------------------
+procedure cpu_read( 
+    signal clk          : in  std_logic;
+    constant a          : in  integer;
+    constant exp_d      : in  std_logic_vector(31 downto 0);
+    signal cpu_sel      : out std_logic;
+    signal cpu_wr       : out std_logic;
+    signal cpu_addr     : out std_logic_vector(15 downto 0);
+    signal cpu_wdata    : out std_logic_vector(31 downto 0);
+    signal cpu_rdata    : in  std_logic_vector(31 downto 0);
+    signal cpu_rdata_dv : in  std_logic
+) is
+variable v_bdone    : boolean := false; 
+variable str_out    : string(1 to 256);
+begin
+    wait until clk'event and clk='0';
+    cpu_sel     <= '1';
+    cpu_wr      <= '0';
+    cpu_addr    <= std_logic_vector(to_unsigned(a, 16));
+    cpu_wdata   <= (others=>'0');
+    while (v_bdone = false) loop
+        wait until clk'event and clk='0';
+        cpu_sel     <= '1';
+        if (cpu_rdata_dv = '1') then
+            if (cpu_rdata /= exp_d) then
+                fprint(str_out, "Read  exp: 0x%s  actual: 0x%s\n", to_string(to_bitvector(exp_d),"%08X"), to_string(to_bitvector(cpu_rdata),"%08X"));
+                report str_out severity error;
+            end if;
+            v_bdone := true; 
+            cpu_sel     <= '0';
+            cpu_addr    <= (others=>'0');
+        end if;
+    end loop;
+    wait until clk'event and clk='0';
+    wait until clk'event and clk='0';
+end;
+
+-------------------------------------------------------------
+-- CPU read pulse definition RAM
+-- Use 96 bit data to make three 32-bit writes
+-------------------------------------------------------------
+procedure cpu_read_pulsedef(
+    signal clk              : in  std_logic;
+
+    constant num_entry      : in  integer;
+
+    -- TODO: Partial ? list of parameters
+    constant pulsetime      : in  integer;  -- Pulse time in clock cycles
+    constant timefactor     : in  real;     -- Fixed point time scale factor
+    constant gainfactor     : in  real;     -- Fixed point gain value. Max value 1.0 is hex X"8000". Gain 0.5 is therefore X"4000"
+    constant wavestartaddr  : in  integer;  -- Start address in waveform RAM
+    constant wavesteps      : in  integer;  -- Number of steps in waveform rise and fall
+    constant wavetopwidth   : in  integer;  -- Number of clock cycles in waveform top between end of rise and start of fall
+    
+
+    signal cpu_sel          : out std_logic;
+    signal cpu_wr           : out std_logic;
+    signal cpu_addr         : out std_logic_vector(15 downto 0);
+    signal cpu_wdata        : out std_logic_vector(31 downto 0)
+) is
+-- Vectors for converted values
+variable slv_pulsetime      : std_logic_vector(23 downto 0);  -- For 24-bit pulse time
+variable slv_timefactor     : std_logic_vector(15 downto 0);  -- For 16-bit fixed point timestep
+variable slv_gainfactor     : std_logic_vector(15 downto 0);  -- For 16-bit fixed point gain
+variable slv_wavestartaddr  : std_logic_vector( 9 downto 0);  -- For 10-bit address i.e. 1024 point waveform RAM
+variable slv_wavesteps      : std_logic_vector( 9 downto 0);  -- For 10-bit number of steps i.e. 0 = 1 step, X"3FF" = 1024 points
+variable slv_wavetopwidth   : std_logic_vector(16 downto 0);  -- For 17-bit number of clock cycles in top of waveform
+
+variable slv_entry_data     : std_logic_vector(95 downto 0);  -- Vector for entire memory entry
+
+-- constant ADR_PULSE_DEF      : integer :=  to_integer(unsigned(X"?????"));    -- Use address of pulse definition RAM from qlaser_pkg
+-- Define the number of fractional bits
+constant BIT_FRAC : integer := 4;  -- TODO: this should be defined in qlaser_pkg
+begin
+
+    -- Convert each field into its std_logic_vector equivalent
+    slv_pulsetime     := std_logic_vector(to_unsigned(pulsetime, 24));
+    slv_timefactor    := std_logic_vector(to_unsigned(integer(timefactor * real(2**BIT_FRAC)), 16));  -- Convert real to std_logic_vector keeping the fractional part
+    slv_gainfactor    := std_logic_vector(to_unsigned(integer(gainfactor * real(2**BIT_FRAC)), 16));  -- Convert real to std_logic_vector keeping the fractional part
+    slv_wavestartaddr := std_logic_vector(to_unsigned(wavestartaddr, 10));
+    slv_wavesteps     := std_logic_vector(to_unsigned(wavesteps, 10));
+    slv_wavetopwidth  := std_logic_vector(to_unsigned(wavetopwidth, 17));
+    
+    
+    --etc, etc.
+
+    -- Build full entry out of component fields. Final length should be 96 bits.
+    slv_entry_data  := "000" & slv_pulsetime & slv_timefactor & slv_gainfactor & slv_wavestartaddr & slv_wavesteps & slv_wavetopwidth;   -- This might not correct
+
+    -- Write 96-bit entry in 3 writes.  (Address is an integer)
+    cpu_read(clk, ADR_RAM_PULSE+(4*num_entry),     slv_entry_data(31 downto  0), cpu_sel, cpu_wr, cpu_addr, cpu_wdata, cpu_rdata, cpu_rdata_dv);
+    cpu_read(clk, ADR_RAM_PULSE+(4*num_entry) + 1, slv_entry_data(63 downto 32), cpu_sel, cpu_wr, cpu_addr, cpu_wdata, cpu_rdata, cpu_rdata_dv);
+    cpu_read(clk, ADR_RAM_PULSE+(4*num_entry) + 2, slv_entry_data(95 downto 64), cpu_sel, cpu_wr, cpu_addr, cpu_wdata, cpu_rdata, cpu_rdata_dv);
+    
+end;
+
+
+-------------------------------------------------------------
+-- Delay
+-------------------------------------------------------------
+procedure clk_delay(
+    constant nclks  : in  integer
+) is
+begin
+    for I in 0 to nclks loop
+        wait until clk'event and clk ='0';
+    end loop;
+end;
+
+
+----------------------------------------------------------------
+-- Print a string with no time or instance path.
+----------------------------------------------------------------
+procedure cpu_print_msg(
+    constant msg    : in    string
+) is
+variable line_out   : line;
+begin
+    write(line_out, msg);
+    writeline(output, line_out);
+end procedure cpu_print_msg;
+
+
+begin
+
+    -------------------------------------------------------------
+	-- Unit Under Test
+    -------------------------------------------------------------
+	u_dac_pulse : entity work.qlaser_dacs_pulse_channel
+	port map (
+        clk             => clk                      , -- in  std_logic;
+        reset           => reset                    , -- in  std_logic;
+
+        enable          => enable                   , -- out std_logic;  
+        start           => start                    , -- out std_logic; 
+        cnt_time        => cnt_time                 , -- out std_logic_vector(23 downto 0);    -- Set to '1' while SPI interface is busy
+
+        busy            => busy                     , -- out std_logic;    -- Set to '1' while SPI interface is busy
+
+        -- CPU interface
+        cpu_wr          => cpu_wr                   , -- in  std_logic;
+        cpu_sel         => cpu_sel                  , -- in  std_logic;
+        cpu_addr        => cpu_addr(11 downto 0)    , -- in  std_logic_vector(11 downto 0);
+        cpu_wdata       => cpu_wdata                , -- in  std_logic_vector(31 downto 0);
+
+        cpu_rdata       => cpu_rdata                , -- out std_logic_vector(31 downto 0);
+        cpu_rdata_dv    => cpu_rdata_dv             , -- out std_logic; 
+
+                   
+        -- AXI-Stream interface
+        axis_tready     => axis_tready              , -- in  std_logic;          -- Clock (50 MHz max)
+        axis_tdata      => axis_tdata               , -- out std_logic_vector(15 downto 0);
+        axis_tvalid     => axis_tvalid              , -- out std_logic;          -- Master out, Slave in. (Data to DAC)
+        axis_tlast      => axis_tlast                 -- out std_logic;          -- Active low chip select (sync_n)
+    );
+	
+
+    -------------------------------------------------------------
+    -- Generate system clock. Halt when sim_done is true.
+    -------------------------------------------------------------
+    pr_clk : process
+    begin
+        clk  <= '0';
+        wait for (CLK_PER/2);
+        clk  <= '1';
+        wait for (CLK_PER-CLK_PER/2);
+        if (sim_done=true) then
+            wait; 
+        end if;
+    end process;
+
+  
+    -------------------------------------------------------------
+    -- Reset and drive CPU bus 
+    -------------------------------------------------------------
+    pr_main : process
+    variable v_ndata32  : integer := 0;
+    variable v_ndata16 : integer := 0;
+    begin
+        -- Reset 
+        reset       <= '1';
+        enable      <= '0';
+        start       <= '0';
+        cnt_time    <= (others=>'0');
+
+        cpu_sel     <= '0';
+        cpu_wr      <= '0';
+		cpu_wdata   <= (others=>'0');
+		cpu_addr  	<= (others=>'0');
+
+        cpu_print_msg("Simulation start");
+        clk_delay(5);
+        reset       <= '0';
+
+        clk_delay(5);
+        enable      <= '1';
+       
+
+        clk_delay(20);
+
+
+        ----------------------------------------------------------------
+        -- Load  pulse RAM with a series of pulse start times
+        ----------------------------------------------------------------
+        v_ndata32 := 128; -- Time for first pulse
+        cpu_print_msg("Load pulse RAM");
+        for NADDR in 0 to 15 loop
+            -- cpu_write(clk, ADR_RAM_PULSE + NADDR , v_ndata32 + (NADDR*(1024+32)), cpu_sel, cpu_wr, cpu_addr, cpu_wdata);  -- TODO: rn don't know how to make it write three difference places, for now I', just gonna manually write it
+            cpu_write_pulsedef(clk, NADDR, v_ndata32 + (NADDR*(1024+32)), 1.0, 1.0, 0, NADDR*32, 512, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+        end loop;
+        cpu_print_msg("Pulse RAM loaded");
+        clk_delay(20);
+
+        ----------------------------------------------------------------
+        -- Read back Pulse RAM. 
+        ----------------------------------------------------------------
+        v_ndata32 := 128; -- Time for first pulse
+        for NADDR in 0 to 15 loop
+            cpu_read_pulsedef(clk, NADDR, v_ndata32 + (NADDR*(1024+32)), 1.0, 1.0, 0, NADDR*32, 512, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+        end loop;
+        clk_delay(20);
+                                               
+        wait for 10 us;
+        
+        cpu_print_msg("Simulation done");
+        clk_delay(5);
+		
+        sim_done    <= true;
+        wait;
+
+    end process;
+
+end behave;
+

src/hdl/tb/tb_cpubus_dacs_pulse_channel.vhdl

@@ -0,0 +1,428 @@
+-----------------------------------------------------------
+-- File : tb_cpubus_dacs_pulse_channel.vhd
+-----------------------------------------------------------
+-- 
+-- Testbench for CPU bus peripheral.
+--
+--  Description  : Pulse output control of Qlaser FPGA
+--                 Block drives AXI-stream to JESD DACs
+--
+----------------------------------------------------------
+library ieee;
+use     ieee.numeric_std.all;
+use     ieee.std_logic_1164.all; 
+use     std.textio.all; 
+
+use     work.std_iopak.all;
+
+
+entity tb_cpubus_dacs_pulse_channel is
+end    tb_cpubus_dacs_pulse_channel;
+
+architecture behave of tb_cpubus_dacs_pulse_channel is 
+
+signal clk                          : std_logic;
+signal reset                        : std_logic;
+signal enable                       : std_logic;  
+signal start                        : std_logic;  
+signal cnt_time                     : std_logic_vector(23 downto 0);  
+signal busy                         : std_logic;  
+signal cpu_wr                       : std_logic;
+signal cpu_sel                      : std_logic;
+signal cpu_addr                     : std_logic_vector(15 downto 0);
+signal cpu_wdata                    : std_logic_vector(31 downto 0);
+signal cpu_rdata                    : std_logic_vector(31 downto 0);
+signal cpu_rdata_dv                 : std_logic; 
+
+-- AXI-stream output interface
+signal axis_tready                  : std_logic := '1'; -- Always ready
+signal axis_tdata                   : std_logic_vector(15 downto 0);
+signal axis_tvalid                  : std_logic;
+signal axis_tlast                   : std_logic;
+
+-- Halts simulation by stopping clock when set true
+signal sim_done                     : boolean   := false;
+
+-- Crystal clock freq expressed in MHz
+constant CLK_FREQ_MHZ               : real      := 100.0; 
+-- Clock period
+constant CLK_PER                    : time      := integer(1.0E+6/(CLK_FREQ_MHZ)) * 1 ps;
+
+-- Block registers
+-- constant ADR_RAM_PULSE              : integer   :=  to_integer(unsigned(X"0000"));    -- TODO: Modelsim cannot compile this
+-- constant ADR_RAM_WAVE               : integer   :=  to_integer(unsigned(X"0200"));    -- TODO: Modelsim cannot compile this
+constant ADR_RAM_PULSE              : integer   :=  0;    -- TODO: Modelsim cannot compile this
+constant ADR_RAM_WAVE               : integer   :=  2048;    -- TODO: Modelsim cannot compile this
+
+
+-------------------------------------------------------------
+-- CPU write procedure. Address in decimal. Data in hex
+-------------------------------------------------------------
+procedure cpu_write( 
+    signal clk          : in  std_logic;
+    constant a          : in  integer;
+    constant d          : in  std_logic_vector(31 downto 0);
+    signal cpu_sel      : out std_logic;
+    signal cpu_wr       : out std_logic;
+    signal cpu_addr     : out std_logic_vector(15 downto 0);
+    signal cpu_wdata    : out std_logic_vector(31 downto 0)
+) is
+begin
+    wait until clk'event and clk='0';
+    cpu_sel     <= '1';
+    cpu_wr      <= '1';
+    cpu_addr    <= std_logic_vector(to_unsigned(a, 16));
+    cpu_wdata   <= std_logic_vector(d);
+    wait until clk'event and clk='0';
+    cpu_sel     <= '0';
+    cpu_wr      <= '0';
+    cpu_addr    <= (others=>'0');
+    cpu_wdata   <= (others=>'0');
+    wait until clk'event and clk='0';
+end;
+
+
+-------------------------------------------------------------
+-- CPU write procedure. Address and Data in decimal
+-------------------------------------------------------------
+procedure cpu_write( 
+    signal clk          : in  std_logic;
+    constant a          : in  integer;
+    constant d          : in  integer;
+    signal cpu_sel      : out std_logic;
+    signal cpu_wr       : out std_logic;
+    signal cpu_addr     : out std_logic_vector(15 downto 0);
+    signal cpu_wdata    : out std_logic_vector(31 downto 0)
+) is
+begin
+    cpu_write(clk, a , std_logic_vector(to_unsigned(d,32)), cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+end;
+
+-------------------------------------------------------------
+-- CPU write pulse definition RAM
+-- Make fore 32-bit data write
+-------------------------------------------------------------
+procedure cpu_write_pulsedef(
+    signal clk              : in  std_logic;
+
+    constant num_entry      : in  integer;
+
+    -- TODO: Partial ? list of parameters
+    constant pulsetime      : in  integer;  -- Pulse time in clock cycles
+    constant timefactor     : in  real;     -- Fixed point time scale factor
+    constant gainfactor     : in  real;     -- Fixed point gain value. Max value 1.0 is hex X"8000". Gain 0.5 is therefore X"4000"
+    constant wavestartaddr  : in  integer;  -- Start address in waveform RAM
+    constant wavesteps      : in  integer;  -- Number of steps in waveform rise and fall
+    constant wavetopwidth   : in  integer;  -- Number of clock cycles in waveform top between end of rise and start of fall
+    
+
+    signal cpu_sel          : out std_logic;
+    signal cpu_wr           : out std_logic;
+    signal cpu_addr         : out std_logic_vector(15 downto 0);
+    signal cpu_wdata        : out std_logic_vector(31 downto 0)
+) is
+-- Vectors for converted values
+variable slv_pulsetime      : std_logic_vector(23 downto 0);  -- For 24-bit pulse time
+variable slv_timefactor     : std_logic_vector(15 downto 0);  -- For 16-bit fixed point timestep
+variable slv_gainfactor     : std_logic_vector(15 downto 0);  -- For 16-bit fixed point gain
+variable slv_wavestartaddr  : std_logic_vector(11 downto 0);  -- For 12-bit address i.e. 1024 point waveform RAM
+variable slv_wavesteps      : std_logic_vector( 9 downto 0);  -- For 10-bit number of steps i.e. 0 = 1 step, X"3FF" = 1024 points
+variable slv_wavetopwidth   : std_logic_vector(16 downto 0);  -- For 17-bit number of clock cycles in top of waveform
+
+-- constant ADR_PULSE_DEF      : integer :=  to_integer(unsigned(X"?????"));    -- Use address of pulse definition RAM from qlaser_pkg
+-- Define the number of fractional bits
+constant BIT_FRAC : integer := 4;  -- TODO: this should be defined in qlaser_pkg
+begin
+
+    -- Convert each field into its std_logic_vector equivalent
+    slv_pulsetime     := std_logic_vector(to_unsigned(pulsetime, 24));
+    slv_timefactor    := std_logic_vector(to_unsigned(integer(timefactor * real(2**BIT_FRAC)), 16));  -- Convert real to std_logic_vector keeping the fractional part
+    slv_gainfactor    := std_logic_vector(to_unsigned(integer(gainfactor * real(2**BIT_FRAC)), 16));  -- Convert real to std_logic_vector keeping the fractional part
+    slv_wavestartaddr := std_logic_vector(to_unsigned(wavestartaddr, 12));
+    slv_wavesteps     := std_logic_vector(to_unsigned(wavesteps, 10));
+    slv_wavetopwidth  := std_logic_vector(to_unsigned(wavetopwidth, 17));
+    
+    
+    --etc, etc.
+    -- 4 writes.  (Address is an integer)
+    cpu_write(clk, ADR_RAM_PULSE+num_entry   , x"00" & slv_pulsetime, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+    cpu_write(clk, ADR_RAM_PULSE+(num_entry+1) , "00" & x"00" & slv_wavesteps & slv_wavestartaddr, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+    cpu_write(clk, ADR_RAM_PULSE+(num_entry+2) , slv_timefactor & slv_gainfactor, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+    cpu_write(clk, ADR_RAM_PULSE+(num_entry+3) , "0000000" & x"00" & slv_wavetopwidth, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+
+end;
+
+-------------------------------------------------------------
+-- CPU read procedure
+-------------------------------------------------------------
+procedure cpu_read( 
+    signal clk          : in  std_logic;
+    constant a          : in  integer;
+    constant exp_d      : in  std_logic_vector(31 downto 0);
+    signal cpu_sel      : out std_logic;
+    signal cpu_wr       : out std_logic;
+    signal cpu_addr     : out std_logic_vector(15 downto 0);
+    signal cpu_wdata    : out std_logic_vector(31 downto 0);
+    signal cpu_rdata    : in  std_logic_vector(31 downto 0);
+    signal cpu_rdata_dv : in  std_logic
+) is
+variable v_bdone    : boolean := false; 
+variable str_out    : string(1 to 256);
+begin
+    wait until clk'event and clk='0';
+    cpu_sel     <= '1';
+    cpu_wr      <= '0';
+    cpu_addr    <= std_logic_vector(to_unsigned(a, 16));
+    cpu_wdata   <= (others=>'0');
+    while (v_bdone = false) loop
+        wait until clk'event and clk='0';
+        cpu_sel     <= '1';
+        if (cpu_rdata_dv = '1') then
+            if (cpu_rdata /= exp_d) then
+                fprint(str_out, "Read  exp: 0x%s  actual: 0x%s\n", to_string(to_bitvector(exp_d),"%08X"), to_string(to_bitvector(cpu_rdata),"%08X"));
+                report str_out severity error;
+            end if;
+            v_bdone := true; 
+            cpu_sel     <= '0';
+            cpu_addr    <= (others=>'0');
+        end if;
+    end loop;
+    wait until clk'event and clk='0';
+    wait until clk'event and clk='0';
+end;
+
+-------------------------------------------------------------
+-- CPU read pulse definition RAM
+-- make four 32-bit reads
+-------------------------------------------------------------
+procedure cpu_read_pulsedef(
+    signal clk              : in  std_logic;
+
+    constant num_entry      : in  integer;
+
+    -- TODO: Partial ? list of parameters
+    constant pulsetime      : in  integer;  -- Pulse time in clock cycles
+    constant timefactor     : in  real;     -- Fixed point time scale factor
+    constant gainfactor     : in  real;     -- Fixed point gain value. Max value 1.0 is hex X"8000". Gain 0.5 is therefore X"4000"
+    constant wavestartaddr  : in  integer;  -- Start address in waveform RAM
+    constant wavesteps      : in  integer;  -- Number of steps in waveform rise and fall
+    constant wavetopwidth   : in  integer;  -- Number of clock cycles in waveform top between end of rise and start of fall
+    
+
+    signal cpu_sel          : out std_logic;
+    signal cpu_wr           : out std_logic;
+    signal cpu_addr         : out std_logic_vector(15 downto 0);
+    signal cpu_wdata        : out std_logic_vector(31 downto 0)
+) is
+-- Vectors for converted values
+variable slv_pulsetime      : std_logic_vector(23 downto 0);  -- For 24-bit pulse time
+variable slv_timefactor     : std_logic_vector(15 downto 0);  -- For 16-bit fixed point timestep
+variable slv_gainfactor     : std_logic_vector(15 downto 0);  -- For 16-bit fixed point gain
+variable slv_wavestartaddr  : std_logic_vector(11 downto 0);  -- For 12-bit address i.e. 1024 point waveform RAM
+variable slv_wavesteps      : std_logic_vector( 9 downto 0);  -- For 10-bit number of steps i.e. 0 = 1 step, X"3FF" = 1024 points
+variable slv_wavetopwidth   : std_logic_vector(16 downto 0);  -- For 17-bit number of clock cycles in top of waveform
+
+-- constant ADR_PULSE_DEF      : integer :=  to_integer(unsigned(X"?????"));    -- Use address of pulse definition RAM from qlaser_pkg
+-- Define the number of fractional bits
+constant BIT_FRAC : integer := 4;  -- TODO: this should be defined in qlaser_pkg
+begin
+
+    -- Convert each field into its std_logic_vector equivalent
+    slv_pulsetime     := std_logic_vector(to_unsigned(pulsetime, 24));
+    slv_timefactor    := std_logic_vector(to_unsigned(integer(timefactor * real(2**BIT_FRAC)), 16));  -- Convert real to std_logic_vector keeping the fractional part
+    slv_gainfactor    := std_logic_vector(to_unsigned(integer(gainfactor * real(2**BIT_FRAC)), 16));  -- Convert real to std_logic_vector keeping the fractional part
+    slv_wavestartaddr := std_logic_vector(to_unsigned(wavestartaddr, 12));
+    slv_wavesteps     := std_logic_vector(to_unsigned(wavesteps, 10));
+    slv_wavetopwidth  := std_logic_vector(to_unsigned(wavetopwidth, 17));
+    
+    
+    --etc, etc.
+    -- 4 writes.  (Address is an integer)
+    -- cpu_read(clk, ADR_RAM_PULSE+num_entry, x"00" & slv_pulsetime, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+    -- cpu_read(clk, ADR_RAM_PULSE+(num_entry+1) , "00" & x"00" & slv_wavesteps & slv_wavestartaddr, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+    -- cpu_read(clk, ADR_RAM_PULSE+(num_entry+2) , slv_timefactor & slv_gainfactor, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+    -- cpu_read(clk, ADR_RAM_PULSE+(num_entry+3) , "0000000" & x"00" & slv_wavetopwidth, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+
+end;
+
+
+-------------------------------------------------------------
+-- Delay
+-------------------------------------------------------------
+procedure clk_delay(
+    constant nclks  : in  integer
+) is
+begin
+    for I in 0 to nclks loop
+        wait until clk'event and clk ='0';
+    end loop;
+end;
+
+
+----------------------------------------------------------------
+-- Print a string with no time or instance path.
+----------------------------------------------------------------
+procedure cpu_print_msg(
+    constant msg    : in    string
+) is
+variable line_out   : line;
+begin
+    write(line_out, msg);
+    writeline(output, line_out);
+end procedure cpu_print_msg;
+
+
+begin
+
+    -------------------------------------------------------------
+	-- Unit Under Test
+    -------------------------------------------------------------
+	u_dac_pulse : entity work.qlaser_dacs_pulse_channel
+	port map (
+        clk             => clk                      , -- in  std_logic;
+        reset           => reset                    , -- in  std_logic;
+
+        enable          => enable                   , -- out std_logic;  
+        start           => start                    , -- out std_logic; 
+        cnt_time        => cnt_time                 , -- out std_logic_vector(23 downto 0);    -- Set to '1' while SPI interface is busy
+
+        busy            => busy                     , -- out std_logic;    -- Set to '1' while SPI interface is busy
+
+        -- CPU interface
+        cpu_wr          => cpu_wr                   , -- in  std_logic;
+        cpu_sel         => cpu_sel                  , -- in  std_logic;
+        cpu_addr        => cpu_addr(11 downto 0)    , -- in  std_logic_vector(11 downto 0);
+        cpu_wdata       => cpu_wdata                , -- in  std_logic_vector(31 downto 0);
+
+        cpu_rdata       => cpu_rdata                , -- out std_logic_vector(31 downto 0);
+        cpu_rdata_dv    => cpu_rdata_dv             , -- out std_logic; 
+
+                   
+        -- AXI-Stream interface
+        axis_tready     => axis_tready              , -- in  std_logic;          -- Clock (50 MHz max)
+        axis_tdata      => axis_tdata               , -- out std_logic_vector(15 downto 0);
+        axis_tvalid     => axis_tvalid              , -- out std_logic;          -- Master out, Slave in. (Data to DAC)
+        axis_tlast      => axis_tlast                 -- out std_logic;          -- Active low chip select (sync_n)
+    );
+	
+
+    -------------------------------------------------------------
+    -- Generate system clock. Halt when sim_done is true.
+    -------------------------------------------------------------
+    pr_clk : process
+    begin
+        clk  <= '0';
+        wait for (CLK_PER/2);
+        clk  <= '1';
+        wait for (CLK_PER-CLK_PER/2);
+        if (sim_done=true) then
+            wait; 
+        end if;
+    end process;
+
+  
+    -------------------------------------------------------------
+    -- Reset and drive CPU bus 
+    -------------------------------------------------------------
+    pr_main : process
+    variable v_ndata32  : integer := 0;
+    variable v_ndata16 : integer := 0;
+    begin
+        -- Reset 
+        reset       <= '1';
+        enable      <= '0';
+        start       <= '0';
+        cnt_time    <= (others=>'0');
+
+        cpu_sel     <= '0';
+        cpu_wr      <= '0';
+		cpu_wdata   <= (others=>'0');
+		cpu_addr  	<= (others=>'0');
+
+        cpu_print_msg("Simulation start");
+        clk_delay(5);
+        reset       <= '0';
+
+        clk_delay(5);
+        enable      <= '1';
+       
+
+        clk_delay(20);
+
+
+        ----------------------------------------------------------------
+        -- Load  pulse RAM with a series of pulse start times
+        ----------------------------------------------------------------
+        v_ndata32 := 128; -- Time for first pulse
+        cpu_print_msg("Load pulse RAM");
+        for NADDR in 0 to 255 loop
+            cpu_write_pulsedef(clk, NADDR*4, v_ndata32 + (NADDR*(1024+32)), 1.0, 1.0, 0, NADDR*32, 512, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+        end loop;
+        cpu_print_msg("Pulse RAM loaded");
+        clk_delay(20);
+
+        -- ----------------------------------------------------------------
+        -- -- Load waveform RAM with a simple ramp
+        -- -- Write two 16-bit values with each write
+        -- ----------------------------------------------------------------
+        -- cpu_print_msg("Load waveform RAM");
+        -- v_ndata16 := 1; -- first waveform value
+        -- for NADDR in 0 to 511 loop
+        --     v_ndata32 := (((v_ndata16+1) * 65536) + v_ndata16);
+        --     cpu_write(clk, (ADR_RAM_WAVE + NADDR)  , v_ndata32, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+        --     v_ndata16 := v_ndata16 + 2;
+        -- end loop;
+        -- cpu_print_msg("Waveform RAM loaded");
+        -- clk_delay(20);
+
+
+        ----------------------------------------------------------------
+        -- Read back Pulse RAM. 
+        ----------------------------------------------------------------
+        v_ndata32 := 128; -- Time for first pulse
+        for NADDR in 0 to 255 loop
+            cpu_read_pulsedef(clk, NADDR*4, v_ndata32 + (NADDR*(1024+32)), 1.0, 1.0, 0, NADDR*32, 512, cpu_sel, cpu_wr, cpu_addr, cpu_wdata);
+        end loop;
+        clk_delay(20);
+
+        -- ----------------------------------------------------------------
+        -- -- Read back Waveform RAM
+        -- ----------------------------------------------------------------
+        -- v_ndata16 := 1; -- first waveform value
+        -- for NADDR in 0 to 511 loop
+        --     v_ndata32 := (((v_ndata16+1) * 65536) + v_ndata16);
+        --     cpu_read (clk, ADR_RAM_WAVE + NADDR  , std_logic_vector(to_unsigned(v_ndata32, 32)) , cpu_sel, cpu_wr, cpu_addr, cpu_wdata, cpu_rdata, cpu_rdata_dv);
+        --     v_ndata16 := v_ndata16 + 2;
+        -- end loop;
+        
+        -- Done reg write/read check
+        cpu_print_msg("RAM readback completed");
+        clk_delay(20);
+                                               
+
+        ----------------------------------------------------------------
+        -- Start the pulse outputs
+        ----------------------------------------------------------------
+        clk_delay(5);
+        start      <= '1';
+        clk_delay(5);
+        start      <= '0';
+
+        -- Wait for cnt_time to reach last pulse start time + waveform size
+        for NCNT in 1 to (128 + 16*(1024+32)+ 1024) loop
+            cnt_time    <= std_logic_vector(unsigned(cnt_time) + 1); 
+            clk_delay(0);
+        end loop;
+        
+        wait for 10 us;
+        
+        cpu_print_msg("Simulation done");
+        clk_delay(5);
+		
+        sim_done    <= true;
+        wait;
+
+    end process;
+
+end behave;
+

src/python/README.md

@@ -0,0 +1 @@
+

tools/README.md

@@ -0,0 +1 @@
+

tools/build_src/build.tcl

@@ -0,0 +1,41 @@
+create_project zcu_pulse_channel ../../prj -force
+
+set_property board_part xilinx.com:zcu102:part0:3.4 [current_project]
+
+add_files {..\..\src\hdl\modules\qlaser_dacs_pulse_channel.vhdl}
+add_files -fileset sim_1 {..\..\src\hdl\tb\tb_cpubus_dacs_pulse_channel.vhdl}
+add_files {..\..\src\hdl\pkg\qlaser_dac_dc_pkg.vhd}
+add_files {..\..\src\hdl\pkg\qlaser_pkg.vhd}
+add_files {..\..\src\hdl\pkg\iopakp.vhd}
+add_files {..\..\src\hdl\pkg\iopakb.vhd}
+read_ip {..\xilinx-zcu\bram_pulseposition\bram_pulseposition.xci}
+read_ip {..\xilinx-zcu\bram_waveform\bram_waveform.xci}
+read_ip {..\xilinx-zcu\fifo_data_to_stream\fifo_data_to_stream.xci}
+read_ip {..\xilinx-zcu\bram_pulse_definition\bram_pulse_definition.xci}
+
+# upgrade_ip [get_ips -filter {SCOPE !~ "*.bd"}]
+generate_target all [get_ips -filter {SCOPE !~ "*.bd"}]
+
+# Run the synthesis and generate the IP output products
+launch_runs synth_1
+
+# Wait for the synthesis to complete
+wait_on_run synth_1
+
+# Generate the simulation models
+proc recursive_glob {dir} {
+    set files [glob -nocomplain -type f -directory $dir *_sim_netlist.vhdl]
+    foreach subdir [glob -nocomplain -type d -directory $dir *] {
+        lappend files {*}[recursive_glob $subdir]
+    }
+    return $files
+}
+
+set src_dir ../../prj/zcu_pulse_channel.gen/sources_1/ip/
+set files [recursive_glob $src_dir]
+
+foreach file $files {
+    file copy -force $file ../../src/hdl/ip_gen
+}
+
+exit

tools/sim/README.md

@@ -0,0 +1,2 @@
+Please put your modelsim.ini file in this directory and compile modelsim in this directory.
+

tools/sim/compile.bat

@@ -0,0 +1,2 @@
+echo off
+vsim -c -quiet -do compile.do

tools/sim/compile.do

@@ -0,0 +1,8 @@
+vlib work
+
+vcom ../../src/hdl/ip_gen/*.vhd*
+vcom ../../src/hdl/pkg/*pkg.vhd
+vcom ../../src/hdl/pkg/iopakp.vhd
+vcom ../../src/hdl/pkg/iopakb.vhd
+vcom ../../src/hdl/modules/*.vhd*
+vcom ../../src/hdl/tb/*.vhd*

tools/sim/run.bat

@@ -0,0 +1,2 @@
+echo off
+modelsim -do run.do

tools/sim/run.do

@@ -0,0 +1,13 @@
+do compile.do
+
+vsim -voptargs="+acc" -lib work tb_cpubus_dacs_pulse_channel
+
+do waves_do/pp_rw_cpu.do
+
+view wave
+view structure
+view signals
+
+run -all
+
+# End

tools/sim/waves_do/pp_rw_cpu.do

@@ -0,0 +1,34 @@
+onerror {resume}
+quietly WaveActivateNextPane {} 0
+add wave -noupdate /tb_cpubus_dacs_pulse_channel/u_dac_pulse/reset
+add wave -noupdate /tb_cpubus_dacs_pulse_channel/u_dac_pulse/clk
+add wave -noupdate -radix unsigned /tb_cpubus_dacs_pulse_channel/u_dac_pulse/cnt_time
+add wave -noupdate /tb_cpubus_dacs_pulse_channel/u_dac_pulse/busy
+add wave -noupdate -radix binary /tb_cpubus_dacs_pulse_channel/u_dac_pulse/cpu_addr
+add wave -noupdate -radix hexadecimal /tb_cpubus_dacs_pulse_channel/u_dac_pulse/cpu_wdata
+add wave -noupdate /tb_cpubus_dacs_pulse_channel/u_dac_pulse/cpu_wr
+add wave -noupdate /tb_cpubus_dacs_pulse_channel/u_dac_pulse/cpu_sel
+add wave -noupdate -radix hexadecimal /tb_cpubus_dacs_pulse_channel/u_dac_pulse/cpu_rdata
+add wave -noupdate /tb_cpubus_dacs_pulse_channel/u_dac_pulse/cpu_rdata_dv
+add wave -noupdate -radix unsigned /tb_cpubus_dacs_pulse_channel/u_dac_pulse/ram_pulse_addra
+add wave -noupdate -radix hexadecimal /tb_cpubus_dacs_pulse_channel/u_dac_pulse/ram_pulse_dina
+add wave -noupdate -radix hexadecimal /tb_cpubus_dacs_pulse_channel/u_dac_pulse/ram_pulse_douta
+add wave -noupdate /tb_cpubus_dacs_pulse_channel/u_dac_pulse/ram_pulse_we
+TreeUpdate [SetDefaultTree]
+WaveRestoreCursors {{Cursor 1} {480433536 fs} 0}
+quietly wave cursor active 1
+configure wave -namecolwidth 150
+configure wave -valuecolwidth 172
+configure wave -justifyvalue left
+configure wave -signalnamewidth 1
+configure wave -snapdistance 10
+configure wave -datasetprefix 0
+configure wave -rowmargin 4
+configure wave -childrowmargin 2
+configure wave -gridoffset 0
+configure wave -gridperiod 1
+configure wave -griddelta 40
+configure wave -timeline 0
+configure wave -timelineunits fs
+update
+WaveRestoreZoom {0 fs} {1953088753 fs}

tools/xilinx-zcu/bram_pulse_definition/bram_pulse_definition.xci

@@ -0,0 +1,419 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<spirit:design xmlns:xilinx="http://www.xilinx.com" xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+  <spirit:vendor>xilinx.com</spirit:vendor>
+  <spirit:library>xci</spirit:library>
+  <spirit:name>unknown</spirit:name>
+  <spirit:version>1.0</spirit:version>
+  <spirit:componentInstances>
+    <spirit:componentInstance>
+      <spirit:instanceName>bram_pulse_definition</spirit:instanceName>
+      <spirit:componentRef spirit:vendor="xilinx.com" spirit:library="ip" spirit:name="blk_mem_gen" spirit:version="8.4"/>
+      <spirit:configurableElementValues>
+        <spirit:configurableElementValue spirit:referenceId="ADDRBLOCK_RANGE.S_1.Mem0">4096</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.ADDR_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.ARUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.AWUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.BUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.DATA_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_BRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_CACHE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_LOCK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_PROT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_QOS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_REGION">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_RRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_WSTRB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.ID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.MAX_BURST_LENGTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.NUM_READ_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.NUM_READ_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.NUM_WRITE_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.NUM_WRITE_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.PROTOCOL">AXI4LITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.READ_WRITE_MODE">READ_WRITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.RUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.RUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.SUPPORTS_NARROW_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.WUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.WUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.ADDR_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.ARUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.AWUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.BUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.DATA_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_BRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_CACHE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_LOCK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_PROT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_QOS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_REGION">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_RRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_WSTRB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.ID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.MAX_BURST_LENGTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.NUM_READ_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.NUM_READ_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.NUM_WRITE_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.NUM_WRITE_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.PROTOCOL">AXI4LITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.READ_WRITE_MODE">READ_WRITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.RUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.RUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.SUPPORTS_NARROW_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.WUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.WUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.MASTER_TYPE">OTHER</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.MEM_ECC">NONE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.MEM_SIZE">8192</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.MEM_WIDTH">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.READ_LATENCY">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.READ_WRITE_MODE"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.MASTER_TYPE">OTHER</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.MEM_ECC">NONE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.MEM_SIZE">8192</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.MEM_WIDTH">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.READ_LATENCY">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.READ_WRITE_MODE"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.RST.ARESETN.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ADDRA_WIDTH">10</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ADDRB_WIDTH">10</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ALGORITHM">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_ID_WIDTH">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_SLAVE_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_TYPE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_BYTE_SIZE">9</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_COMMON_CLK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_COUNT_18K_BRAM">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_COUNT_36K_BRAM">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CTRL_ECC_ALGO">NONE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DEFAULT_DATA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DISABLE_WARN_BHV_COLL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DISABLE_WARN_BHV_RANGE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ELABORATION_DIR">./</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ENABLE_32BIT_ADDRESS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_DEEPSLEEP_PIN">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_ECC_PIPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_RDADDRA_CHG">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_RDADDRB_CHG">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_SAFETY_CKT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_SHUTDOWN_PIN">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_SLEEP_PIN">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EST_POWER_SUMMARY">Estimated Power for IP     :     4.238151 mW</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_FAMILY">zynquplus</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXI_ID">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_ENA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_ENB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_INJECTERR">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_MEM_OUTPUT_REGS_A">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_MEM_OUTPUT_REGS_B">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_MUX_OUTPUT_REGS_A">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_MUX_OUTPUT_REGS_B">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_REGCEA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_REGCEB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_RSTA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_RSTB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_SOFTECC_INPUT_REGS_A">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_SOFTECC_OUTPUT_REGS_B">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INITA_VAL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INITB_VAL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INIT_FILE">bram_pulse_definition.mem</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INIT_FILE_NAME">no_coe_file_loaded</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INTERFACE_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_LOAD_INIT_FILE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MEM_TYPE">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MUX_PIPELINE_STAGES">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_TYPE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_DEPTH_A">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_DEPTH_B">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_LATENCY_A">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_LATENCY_B">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_WIDTH_A">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_WIDTH_B">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RSTRAM_A">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RSTRAM_B">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RST_PRIORITY_A">CE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RST_PRIORITY_B">CE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SIM_COLLISION_CHECK">ALL</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_BRAM_BLOCK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_BYTE_WEA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_BYTE_WEB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_DEFAULT_DATA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_ECC">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_SOFTECC">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_URAM">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WEA_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WEB_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_DEPTH_A">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_DEPTH_B">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_MODE_A">WRITE_FIRST</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_MODE_B">WRITE_FIRST</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_WIDTH_A">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_WIDTH_B">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_XDEVICEFAMILY">zynquplus</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.AXI_ID_Width">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.AXI_Slave_Type">Memory_Slave</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.AXI_Type">AXI4_Full</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Additional_Inputs_for_Power_Estimation">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Algorithm">Minimum_Area</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Assume_Synchronous_Clk">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Byte_Size">9</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CTRL_ECC_ALGO">NONE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Coe_File">no_coe_file_loaded</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Collision_Warnings">ALL</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Component_Name">bram_pulse_definition</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Disable_Collision_Warnings">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Disable_Out_of_Range_Warnings">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ECC">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.EN_DEEPSLEEP_PIN">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.EN_ECC_PIPE">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.EN_SAFETY_CKT">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.EN_SHUTDOWN_PIN">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.EN_SLEEP_PIN">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_32bit_Address">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_A">Always_Enabled</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_B">Always_Enabled</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Error_Injection_Type">Single_Bit_Error_Injection</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Fill_Remaining_Memory_Locations">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Interface_Type">Native</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Load_Init_File">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MEM_FILE">no_mem_loaded</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Memory_Type">True_Dual_Port_RAM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Operating_Mode_A">WRITE_FIRST</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Operating_Mode_B">WRITE_FIRST</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Output_Reset_Value_A">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Output_Reset_Value_B">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PRIM_type_to_Implement">BRAM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Pipeline_Stages">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_A_Clock">100</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_A_Enable_Rate">100</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_A_Write_Rate">50</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_B_Clock">100</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_B_Enable_Rate">100</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_B_Write_Rate">50</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Primitive">8kx2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.RD_ADDR_CHNG_A">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.RD_ADDR_CHNG_B">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.READ_LATENCY_A">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.READ_LATENCY_B">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Read_Width_A">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Read_Width_B">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_PortA_Output_of_Memory_Core">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_PortA_Output_of_Memory_Primitives">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_PortB_Output_of_Memory_Core">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_PortB_Output_of_Memory_Primitives">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Remaining_Memory_Locations">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Memory_Latch_A">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Memory_Latch_B">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Priority_A">CE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Priority_B">CE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Type">SYNC</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_AXI_ID">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_Byte_Write_Enable">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_Error_Injection_Pins">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_REGCEA_Pin">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_REGCEB_Pin">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_RSTA_Pin">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_RSTB_Pin">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Depth_A">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Width_A">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Width_B">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ecctype">No_ECC</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.register_porta_input_of_softecc">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.register_portb_output_of_softecc">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.softecc">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.use_bram_block">Stand_Alone</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.ARCHITECTURE">zynquplus</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BASE_BOARD_PART">xilinx.com:zcu102:part0:3.4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BOARD_CONNECTIONS"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.DEVICE">xczu9eg</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PACKAGE">ffvb1156</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PREFHDL">VERILOG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SILICON_REVISION"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SIMULATOR_LANGUAGE">MIXED</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SPEEDGRADE">-2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.STATIC_POWER"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.TEMPERATURE_GRADE">E</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_CUSTOMIZATION">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_GENERATION">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPCONTEXT">IP_Flow</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPREVISION">5</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.MANAGED">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.OUTPUTDIR">../../../prj/zcu_pulse_channel.gen/sources_1/ip/bram_pulse_definition</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SELECTEDSIMMODEL"/>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SHAREDDIR">.</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SWVERSION">2022.1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SYNTHESISFLOW">OUT_OF_CONTEXT</spirit:configurableElementValue>
+      </spirit:configurableElementValues>
+      <spirit:vendorExtensions>
+        <xilinx:componentInstanceExtensions>
+          <xilinx:configElementInfos>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.ADDR_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.ARUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.AWUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.BUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.DATA_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_BRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_BURST" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_CACHE" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_LOCK" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_PROT" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_QOS" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_REGION" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_RRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_WSTRB" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.PROTOCOL" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.RUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.WUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.ADDR_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.ARUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.AWUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.BUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.DATA_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_BRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_BURST" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_CACHE" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_LOCK" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_PROT" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_QOS" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_REGION" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_RRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_WSTRB" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.PROTOCOL" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.RUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.WUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Enable_A" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Enable_B" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Memory_Type" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Port_B_Clock" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Port_B_Enable_Rate" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Port_B_Write_Rate" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Read_Width_A" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Read_Width_B" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Register_PortA_Output_of_Memory_Primitives" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Register_PortB_Output_of_Memory_Primitives" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Write_Depth_A" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Write_Width_A" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Write_Width_B" xilinx:valueSource="user"/>
+          </xilinx:configElementInfos>
+          <xilinx:boundaryDescriptionInfo>
+            <xilinx:boundaryDescription xilinx:boundaryDescriptionJSON="{
+              &quot;schema&quot;: &quot;xilinx.com:schema:json_boundary:1.0&quot;,
+              &quot;boundary&quot;: {
+                &quot;ports&quot;: {
+                  &quot;clka&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;wea&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;0&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;addra&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;9&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;dina&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;31&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;douta&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;size_left&quot;: &quot;31&quot;, &quot;size_right&quot;: &quot;0&quot; } ],
+                  &quot;clkb&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;web&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;0&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;addrb&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;9&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;dinb&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;31&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;doutb&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;size_left&quot;: &quot;31&quot;, &quot;size_right&quot;: &quot;0&quot; } ]
+                },
+                &quot;interfaces&quot;: {
+                  &quot;CLK.ACLK&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:signal:clock:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:signal:clock_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;ASSOCIATED_BUSIF&quot;: [ { &quot;value&quot;: &quot;AXI_SLAVE_S_AXI:AXILite_SLAVE_S_AXI&quot;, &quot;value_src&quot;: &quot;constant&quot;, &quot;usage&quot;: &quot;all&quot; } ],
+                      &quot;ASSOCIATED_RESET&quot;: [ { &quot;value&quot;: &quot;s_aresetn&quot;, &quot;value_src&quot;: &quot;constant&quot;, &quot;usage&quot;: &quot;all&quot; } ],
+                      &quot;FREQ_HZ&quot;: [ { &quot;value&quot;: &quot;100000000&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;FREQ_TOLERANCE_HZ&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;PHASE&quot;: [ { &quot;value&quot;: &quot;0.0&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;float&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;CLK_DOMAIN&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_PORT&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;INSERT_VIP&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;user&quot;, &quot;format&quot;: &quot;long&quot;, &quot;usage&quot;: &quot;simulation.rtl&quot;, &quot;is_static_object&quot;: false } ]
+                    }
+                  },
+                  &quot;RST.ARESETN&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:signal:reset:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:signal:reset_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;POLARITY&quot;: [ { &quot;value&quot;: &quot;ACTIVE_LOW&quot;, &quot;value_src&quot;: &quot;constant&quot;, &quot;usage&quot;: &quot;all&quot; } ],
+                      &quot;INSERT_VIP&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;user&quot;, &quot;format&quot;: &quot;long&quot;, &quot;usage&quot;: &quot;simulation.rtl&quot;, &quot;is_static_object&quot;: false } ]
+                    }
+                  },
+                  &quot;BRAM_PORTA&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:interface:bram:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:interface:bram_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;MEM_SIZE&quot;: [ { &quot;value&quot;: &quot;8192&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MEM_WIDTH&quot;: [ { &quot;value&quot;: &quot;32&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MEM_ECC&quot;: [ { &quot;value&quot;: &quot;NONE&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MASTER_TYPE&quot;: [ { &quot;value&quot;: &quot;OTHER&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;READ_WRITE_MODE&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;READ_LATENCY&quot;: [ { &quot;value&quot;: &quot;1&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ]
+                    },
+                    &quot;port_maps&quot;: {
+                      &quot;ADDR&quot;: [ { &quot;physical_name&quot;: &quot;addra&quot; } ],
+                      &quot;CLK&quot;: [ { &quot;physical_name&quot;: &quot;clka&quot; } ],
+                      &quot;DIN&quot;: [ { &quot;physical_name&quot;: &quot;dina&quot; } ],
+                      &quot;DOUT&quot;: [ { &quot;physical_name&quot;: &quot;douta&quot; } ],
+                      &quot;WE&quot;: [ { &quot;physical_name&quot;: &quot;wea&quot; } ]
+                    }
+                  },
+                  &quot;BRAM_PORTB&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:interface:bram:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:interface:bram_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;MEM_SIZE&quot;: [ { &quot;value&quot;: &quot;8192&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MEM_WIDTH&quot;: [ { &quot;value&quot;: &quot;32&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MEM_ECC&quot;: [ { &quot;value&quot;: &quot;NONE&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MASTER_TYPE&quot;: [ { &quot;value&quot;: &quot;OTHER&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;READ_WRITE_MODE&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;READ_LATENCY&quot;: [ { &quot;value&quot;: &quot;1&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ]
+                    },
+                    &quot;port_maps&quot;: {
+                      &quot;ADDR&quot;: [ { &quot;physical_name&quot;: &quot;addrb&quot; } ],
+                      &quot;CLK&quot;: [ { &quot;physical_name&quot;: &quot;clkb&quot; } ],
+                      &quot;DIN&quot;: [ { &quot;physical_name&quot;: &quot;dinb&quot; } ],
+                      &quot;DOUT&quot;: [ { &quot;physical_name&quot;: &quot;doutb&quot; } ],
+                      &quot;WE&quot;: [ { &quot;physical_name&quot;: &quot;web&quot; } ]
+                    }
+                  }
+                },
+                &quot;memory_maps&quot;: {
+                  &quot;S_1&quot;: {
+                    &quot;address_blocks&quot;: {
+                      &quot;Mem0&quot;: {
+                        &quot;base_address&quot;: &quot;0&quot;,
+                        &quot;range&quot;: &quot;4096&quot;,
+                        &quot;usage&quot;: &quot;memory&quot;,
+                        &quot;access&quot;: &quot;read-write&quot;,
+                        &quot;parameters&quot;: {
+                          &quot;OFFSET_BASE_PARAM&quot;: [ { &quot;value&quot;: &quot;C_BASEADDR&quot; } ],
+                          &quot;OFFSET_HIGH_PARAM&quot;: [ { &quot;value&quot;: &quot;C_HIGHADDR&quot; } ]
+                        }
+                      }
+                    }
+                  }
+                }
+              }
+            }"/>
+          </xilinx:boundaryDescriptionInfo>
+        </xilinx:componentInstanceExtensions>
+      </spirit:vendorExtensions>
+    </spirit:componentInstance>
+  </spirit:componentInstances>
+</spirit:design>

tools/xilinx-zcu/bram_pulseposition/bram_pulseposition.xci

@@ -0,0 +1,119 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<spirit:design xmlns:xilinx="http://www.xilinx.com" xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+  <spirit:vendor>xilinx.com</spirit:vendor>
+  <spirit:library>xci</spirit:library>
+  <spirit:name>unknown</spirit:name>
+  <spirit:version>1.0</spirit:version>
+  <spirit:componentInstances>
+    <spirit:componentInstance>
+      <spirit:instanceName>bram_pulseposition</spirit:instanceName>
+      <spirit:componentRef spirit:vendor="xilinx.com" spirit:library="ip" spirit:name="dist_mem_gen" spirit:version="8.0"/>
+      <spirit:configurableElementValues>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ADDR_WIDTH">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DEFAULT_DATA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DEPTH">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ELABORATION_DIR">./</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_FAMILY">zynquplus</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_CLK">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_D">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_DPO">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_DPRA">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_I_CE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_QDPO">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_QDPO_CE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_QDPO_CLK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_QDPO_RST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_QDPO_SRST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_QSPO">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_QSPO_CE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_QSPO_RST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_QSPO_SRST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_SPO">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_WE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MEM_INIT_FILE">no_coe_file_loaded</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MEM_TYPE">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PARSER_TYPE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PIPELINE_STAGES">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_QCE_JOINED">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_QUALIFY_WE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_MIF">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_REG_A_D_INPUTS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_REG_DPRA_INPUT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SYNC_ENABLE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WIDTH">96</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Component_Name">bram_pulseposition</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Pipeline_Stages">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ce_overrides">ce_overrides_sync_controls</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.coefficient_file">no_coe_file_loaded</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.common_output_ce">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.common_output_clk">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.data_width">96</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.default_data">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.default_data_radix">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.depth">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.dual_port_address">non_registered</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.dual_port_output_clock_enable">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.input_clock_enable">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.input_options">non_registered</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.memory_type">dual_port_ram</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.output_options">non_registered</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.qualify_we_with_i_ce">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.reset_qdpo">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.reset_qsdpo">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.reset_qspo">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.simple_dual_port_address">non_registered</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.simple_dual_port_output_clock_enable">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.single_port_output_clock_enable">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.sync_reset_qdpo">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.sync_reset_qsdpo">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.sync_reset_qspo">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.ARCHITECTURE">zynquplus</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BASE_BOARD_PART">xilinx.com:zcu102:part0:3.4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BOARD_CONNECTIONS"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.DEVICE">xczu9eg</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PACKAGE">ffvb1156</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PREFHDL">VERILOG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SILICON_REVISION"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SIMULATOR_LANGUAGE">MIXED</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SPEEDGRADE">-2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.STATIC_POWER"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.TEMPERATURE_GRADE">E</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_CUSTOMIZATION">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_GENERATION">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPCONTEXT">IP_Flow</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPREVISION">13</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.MANAGED">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.OUTPUTDIR">../../../prj/zcu_pulse_channel.gen/sources_1/ip/bram_pulseposition</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SELECTEDSIMMODEL"/>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SHAREDDIR">.</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SWVERSION">2022.1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SYNTHESISFLOW">OUT_OF_CONTEXT</spirit:configurableElementValue>
+      </spirit:configurableElementValues>
+      <spirit:vendorExtensions>
+        <xilinx:componentInstanceExtensions>
+          <xilinx:configElementInfos>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.data_width" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.depth" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.memory_type" xilinx:valueSource="user"/>
+          </xilinx:configElementInfos>
+          <xilinx:boundaryDescriptionInfo>
+            <xilinx:boundaryDescription xilinx:boundaryDescriptionJSON="{
+              &quot;schema&quot;: &quot;xilinx.com:schema:json_boundary:1.0&quot;,
+              &quot;boundary&quot;: {
+                &quot;ports&quot;: {
+                  &quot;a&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;3&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;d&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;95&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;dpra&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;3&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;clk&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;we&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;spo&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;size_left&quot;: &quot;95&quot;, &quot;size_right&quot;: &quot;0&quot; } ],
+                  &quot;dpo&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;size_left&quot;: &quot;95&quot;, &quot;size_right&quot;: &quot;0&quot; } ]
+                }
+              }
+            }"/>
+          </xilinx:boundaryDescriptionInfo>
+        </xilinx:componentInstanceExtensions>
+      </spirit:vendorExtensions>
+    </spirit:componentInstance>
+  </spirit:componentInstances>
+</spirit:design>

tools/xilinx-zcu/bram_waveform/bram_waveform.xci

@@ -0,0 +1,419 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<spirit:design xmlns:xilinx="http://www.xilinx.com" xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+  <spirit:vendor>xilinx.com</spirit:vendor>
+  <spirit:library>xci</spirit:library>
+  <spirit:name>unknown</spirit:name>
+  <spirit:version>1.0</spirit:version>
+  <spirit:componentInstances>
+    <spirit:componentInstance>
+      <spirit:instanceName>bram_waveform</spirit:instanceName>
+      <spirit:componentRef spirit:vendor="xilinx.com" spirit:library="ip" spirit:name="blk_mem_gen" spirit:version="8.4"/>
+      <spirit:configurableElementValues>
+        <spirit:configurableElementValue spirit:referenceId="ADDRBLOCK_RANGE.S_1.Mem0">4096</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.ADDR_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.ARUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.AWUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.BUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.DATA_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_BRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_CACHE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_LOCK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_PROT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_QOS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_REGION">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_RRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_WSTRB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.ID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.MAX_BURST_LENGTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.NUM_READ_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.NUM_READ_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.NUM_WRITE_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.NUM_WRITE_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.PROTOCOL">AXI4LITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.READ_WRITE_MODE">READ_WRITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.RUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.RUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.SUPPORTS_NARROW_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.WUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.WUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.ADDR_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.ARUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.AWUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.BUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.DATA_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_BRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_CACHE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_LOCK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_PROT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_QOS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_REGION">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_RRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_WSTRB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.ID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.MAX_BURST_LENGTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.NUM_READ_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.NUM_READ_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.NUM_WRITE_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.NUM_WRITE_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.PROTOCOL">AXI4LITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.READ_WRITE_MODE">READ_WRITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.RUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.RUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.SUPPORTS_NARROW_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.WUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.WUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.MASTER_TYPE">OTHER</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.MEM_ECC">NONE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.MEM_SIZE">8192</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.MEM_WIDTH">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.READ_LATENCY">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTA.READ_WRITE_MODE"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.MASTER_TYPE">OTHER</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.MEM_ECC">NONE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.MEM_SIZE">8192</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.MEM_WIDTH">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.READ_LATENCY">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.BRAM_PORTB.READ_WRITE_MODE"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK.ACLK.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.RST.ARESETN.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ADDRA_WIDTH">11</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ADDRB_WIDTH">12</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ALGORITHM">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_ID_WIDTH">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_SLAVE_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_TYPE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_BYTE_SIZE">9</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_COMMON_CLK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_COUNT_18K_BRAM">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_COUNT_36K_BRAM">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CTRL_ECC_ALGO">NONE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DEFAULT_DATA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DISABLE_WARN_BHV_COLL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DISABLE_WARN_BHV_RANGE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ELABORATION_DIR">./</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ENABLE_32BIT_ADDRESS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_DEEPSLEEP_PIN">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_ECC_PIPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_RDADDRA_CHG">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_RDADDRB_CHG">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_SAFETY_CKT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_SHUTDOWN_PIN">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_SLEEP_PIN">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EST_POWER_SUMMARY">Estimated Power for IP     :     6.91608 mW</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_FAMILY">zynquplus</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXI_ID">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_ENA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_ENB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_INJECTERR">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_MEM_OUTPUT_REGS_A">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_MEM_OUTPUT_REGS_B">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_MUX_OUTPUT_REGS_A">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_MUX_OUTPUT_REGS_B">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_REGCEA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_REGCEB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_RSTA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_RSTB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_SOFTECC_INPUT_REGS_A">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_SOFTECC_OUTPUT_REGS_B">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INITA_VAL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INITB_VAL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INIT_FILE">bram_waveform.mem</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INIT_FILE_NAME">no_coe_file_loaded</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INTERFACE_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_LOAD_INIT_FILE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MEM_TYPE">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MUX_PIPELINE_STAGES">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_TYPE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_DEPTH_A">2048</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_DEPTH_B">4096</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_LATENCY_A">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_LATENCY_B">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_WIDTH_A">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_READ_WIDTH_B">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RSTRAM_A">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RSTRAM_B">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RST_PRIORITY_A">CE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RST_PRIORITY_B">CE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SIM_COLLISION_CHECK">ALL</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_BRAM_BLOCK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_BYTE_WEA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_BYTE_WEB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_DEFAULT_DATA">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_ECC">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_SOFTECC">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_URAM">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WEA_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WEB_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_DEPTH_A">2048</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_DEPTH_B">4096</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_MODE_A">WRITE_FIRST</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_MODE_B">WRITE_FIRST</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_WIDTH_A">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRITE_WIDTH_B">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_XDEVICEFAMILY">zynquplus</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.AXI_ID_Width">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.AXI_Slave_Type">Memory_Slave</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.AXI_Type">AXI4_Full</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Additional_Inputs_for_Power_Estimation">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Algorithm">Minimum_Area</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Assume_Synchronous_Clk">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Byte_Size">9</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CTRL_ECC_ALGO">NONE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Coe_File">no_coe_file_loaded</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Collision_Warnings">ALL</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Component_Name">bram_waveform</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Disable_Collision_Warnings">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Disable_Out_of_Range_Warnings">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ECC">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.EN_DEEPSLEEP_PIN">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.EN_ECC_PIPE">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.EN_SAFETY_CKT">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.EN_SHUTDOWN_PIN">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.EN_SLEEP_PIN">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_32bit_Address">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_A">Always_Enabled</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_B">Always_Enabled</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Error_Injection_Type">Single_Bit_Error_Injection</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Fill_Remaining_Memory_Locations">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Interface_Type">Native</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Load_Init_File">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MEM_FILE">no_mem_loaded</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Memory_Type">True_Dual_Port_RAM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Operating_Mode_A">WRITE_FIRST</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Operating_Mode_B">WRITE_FIRST</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Output_Reset_Value_A">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Output_Reset_Value_B">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PRIM_type_to_Implement">BRAM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Pipeline_Stages">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_A_Clock">100</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_A_Enable_Rate">100</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_A_Write_Rate">50</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_B_Clock">100</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_B_Enable_Rate">100</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Port_B_Write_Rate">50</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Primitive">8kx2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.RD_ADDR_CHNG_A">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.RD_ADDR_CHNG_B">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.READ_LATENCY_A">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.READ_LATENCY_B">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Read_Width_A">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Read_Width_B">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_PortA_Output_of_Memory_Core">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_PortA_Output_of_Memory_Primitives">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_PortB_Output_of_Memory_Core">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_PortB_Output_of_Memory_Primitives">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Remaining_Memory_Locations">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Memory_Latch_A">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Memory_Latch_B">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Priority_A">CE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Priority_B">CE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Type">SYNC</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_AXI_ID">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_Byte_Write_Enable">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_Error_Injection_Pins">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_REGCEA_Pin">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_REGCEB_Pin">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_RSTA_Pin">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_RSTB_Pin">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Depth_A">2048</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Width_A">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Width_B">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ecctype">No_ECC</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.register_porta_input_of_softecc">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.register_portb_output_of_softecc">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.softecc">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.use_bram_block">Stand_Alone</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.ARCHITECTURE">zynquplus</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BASE_BOARD_PART">xilinx.com:zcu102:part0:3.4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BOARD_CONNECTIONS"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.DEVICE">xczu9eg</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PACKAGE">ffvb1156</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PREFHDL">VERILOG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SILICON_REVISION"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SIMULATOR_LANGUAGE">MIXED</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SPEEDGRADE">-2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.STATIC_POWER"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.TEMPERATURE_GRADE">E</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_CUSTOMIZATION">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_GENERATION">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPCONTEXT">IP_Flow</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPREVISION">5</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.MANAGED">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.OUTPUTDIR">../../../prj/zcu_pulse_channel.gen/sources_1/ip/bram_waveform</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SELECTEDSIMMODEL"/>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SHAREDDIR">.</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SWVERSION">2022.1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SYNTHESISFLOW">OUT_OF_CONTEXT</spirit:configurableElementValue>
+      </spirit:configurableElementValues>
+      <spirit:vendorExtensions>
+        <xilinx:componentInstanceExtensions>
+          <xilinx:configElementInfos>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.ADDR_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.ARUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.AWUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.BUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.DATA_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_BRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_BURST" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_CACHE" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_LOCK" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_PROT" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_QOS" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_REGION" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_RRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.HAS_WSTRB" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.PROTOCOL" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.RUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXILITE_SLAVE_S_AXI.WUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.ADDR_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.ARUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.AWUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.BUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.DATA_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_BRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_BURST" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_CACHE" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_LOCK" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_PROT" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_QOS" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_REGION" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_RRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.HAS_WSTRB" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.PROTOCOL" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.RUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.AXI_SLAVE_S_AXI.WUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Enable_A" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Enable_B" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Memory_Type" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Port_B_Clock" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Port_B_Enable_Rate" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Port_B_Write_Rate" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Read_Width_A" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Read_Width_B" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Register_PortA_Output_of_Memory_Primitives" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Register_PortB_Output_of_Memory_Primitives" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Write_Depth_A" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Write_Width_A" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Write_Width_B" xilinx:valueSource="user"/>
+          </xilinx:configElementInfos>
+          <xilinx:boundaryDescriptionInfo>
+            <xilinx:boundaryDescription xilinx:boundaryDescriptionJSON="{
+              &quot;schema&quot;: &quot;xilinx.com:schema:json_boundary:1.0&quot;,
+              &quot;boundary&quot;: {
+                &quot;ports&quot;: {
+                  &quot;clka&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;wea&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;0&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;addra&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;10&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;dina&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;31&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;douta&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;size_left&quot;: &quot;31&quot;, &quot;size_right&quot;: &quot;0&quot; } ],
+                  &quot;clkb&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;web&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;0&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;addrb&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;11&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;dinb&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;15&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;doutb&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;size_left&quot;: &quot;15&quot;, &quot;size_right&quot;: &quot;0&quot; } ]
+                },
+                &quot;interfaces&quot;: {
+                  &quot;CLK.ACLK&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:signal:clock:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:signal:clock_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;ASSOCIATED_BUSIF&quot;: [ { &quot;value&quot;: &quot;AXI_SLAVE_S_AXI:AXILite_SLAVE_S_AXI&quot;, &quot;value_src&quot;: &quot;constant&quot;, &quot;usage&quot;: &quot;all&quot; } ],
+                      &quot;ASSOCIATED_RESET&quot;: [ { &quot;value&quot;: &quot;s_aresetn&quot;, &quot;value_src&quot;: &quot;constant&quot;, &quot;usage&quot;: &quot;all&quot; } ],
+                      &quot;FREQ_HZ&quot;: [ { &quot;value&quot;: &quot;100000000&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;FREQ_TOLERANCE_HZ&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;PHASE&quot;: [ { &quot;value&quot;: &quot;0.0&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;float&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;CLK_DOMAIN&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_PORT&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;INSERT_VIP&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;user&quot;, &quot;format&quot;: &quot;long&quot;, &quot;usage&quot;: &quot;simulation.rtl&quot;, &quot;is_static_object&quot;: false } ]
+                    }
+                  },
+                  &quot;RST.ARESETN&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:signal:reset:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:signal:reset_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;POLARITY&quot;: [ { &quot;value&quot;: &quot;ACTIVE_LOW&quot;, &quot;value_src&quot;: &quot;constant&quot;, &quot;usage&quot;: &quot;all&quot; } ],
+                      &quot;INSERT_VIP&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;user&quot;, &quot;format&quot;: &quot;long&quot;, &quot;usage&quot;: &quot;simulation.rtl&quot;, &quot;is_static_object&quot;: false } ]
+                    }
+                  },
+                  &quot;BRAM_PORTA&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:interface:bram:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:interface:bram_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;MEM_SIZE&quot;: [ { &quot;value&quot;: &quot;8192&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MEM_WIDTH&quot;: [ { &quot;value&quot;: &quot;32&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MEM_ECC&quot;: [ { &quot;value&quot;: &quot;NONE&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MASTER_TYPE&quot;: [ { &quot;value&quot;: &quot;OTHER&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;READ_WRITE_MODE&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;READ_LATENCY&quot;: [ { &quot;value&quot;: &quot;1&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ]
+                    },
+                    &quot;port_maps&quot;: {
+                      &quot;ADDR&quot;: [ { &quot;physical_name&quot;: &quot;addra&quot; } ],
+                      &quot;CLK&quot;: [ { &quot;physical_name&quot;: &quot;clka&quot; } ],
+                      &quot;DIN&quot;: [ { &quot;physical_name&quot;: &quot;dina&quot; } ],
+                      &quot;DOUT&quot;: [ { &quot;physical_name&quot;: &quot;douta&quot; } ],
+                      &quot;WE&quot;: [ { &quot;physical_name&quot;: &quot;wea&quot; } ]
+                    }
+                  },
+                  &quot;BRAM_PORTB&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:interface:bram:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:interface:bram_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;MEM_SIZE&quot;: [ { &quot;value&quot;: &quot;8192&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MEM_WIDTH&quot;: [ { &quot;value&quot;: &quot;32&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MEM_ECC&quot;: [ { &quot;value&quot;: &quot;NONE&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;MASTER_TYPE&quot;: [ { &quot;value&quot;: &quot;OTHER&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;READ_WRITE_MODE&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;READ_LATENCY&quot;: [ { &quot;value&quot;: &quot;1&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ]
+                    },
+                    &quot;port_maps&quot;: {
+                      &quot;ADDR&quot;: [ { &quot;physical_name&quot;: &quot;addrb&quot; } ],
+                      &quot;CLK&quot;: [ { &quot;physical_name&quot;: &quot;clkb&quot; } ],
+                      &quot;DIN&quot;: [ { &quot;physical_name&quot;: &quot;dinb&quot; } ],
+                      &quot;DOUT&quot;: [ { &quot;physical_name&quot;: &quot;doutb&quot; } ],
+                      &quot;WE&quot;: [ { &quot;physical_name&quot;: &quot;web&quot; } ]
+                    }
+                  }
+                },
+                &quot;memory_maps&quot;: {
+                  &quot;S_1&quot;: {
+                    &quot;address_blocks&quot;: {
+                      &quot;Mem0&quot;: {
+                        &quot;base_address&quot;: &quot;0&quot;,
+                        &quot;range&quot;: &quot;4096&quot;,
+                        &quot;usage&quot;: &quot;memory&quot;,
+                        &quot;access&quot;: &quot;read-write&quot;,
+                        &quot;parameters&quot;: {
+                          &quot;OFFSET_BASE_PARAM&quot;: [ { &quot;value&quot;: &quot;C_BASEADDR&quot; } ],
+                          &quot;OFFSET_HIGH_PARAM&quot;: [ { &quot;value&quot;: &quot;C_HIGHADDR&quot; } ]
+                        }
+                      }
+                    }
+                  }
+                }
+              }
+            }"/>
+          </xilinx:boundaryDescriptionInfo>
+        </xilinx:componentInstanceExtensions>
+      </spirit:vendorExtensions>
+    </spirit:componentInstance>
+  </spirit:componentInstances>
+</spirit:design>

tools/xilinx-zcu/fifo_data_to_stream/fifo_data_to_stream.xci

@@ -0,0 +1,635 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<spirit:design xmlns:xilinx="http://www.xilinx.com" xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+  <spirit:vendor>xilinx.com</spirit:vendor>
+  <spirit:library>xci</spirit:library>
+  <spirit:name>unknown</spirit:name>
+  <spirit:version>1.0</spirit:version>
+  <spirit:componentInstances>
+    <spirit:componentInstance>
+      <spirit:instanceName>fifo_data_to_stream</spirit:instanceName>
+      <spirit:componentRef spirit:vendor="xilinx.com" spirit:library="ip" spirit:name="fifo_generator" spirit:version="13.2"/>
+      <spirit:configurableElementValues>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CORE_CLK.ASSOCIATED_BUSIF"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CORE_CLK.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CORE_CLK.ASSOCIATED_RESET"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CORE_CLK.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CORE_CLK.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CORE_CLK.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CORE_CLK.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CORE_CLK.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.MASTER_ACLK.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.MASTER_ACLK.ASSOCIATED_RESET"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.MASTER_ACLK.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.MASTER_ACLK.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.MASTER_ACLK.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.MASTER_ACLK.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.MASTER_ACLK.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.ADDR_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.ARUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.AWUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.BUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.DATA_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_BRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_CACHE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_LOCK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_PROT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_QOS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_REGION">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_RRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_WSTRB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.ID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.MAX_BURST_LENGTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.NUM_READ_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.NUM_READ_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.NUM_WRITE_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.NUM_WRITE_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.PROTOCOL">AXI4LITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.READ_WRITE_MODE">READ_WRITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.RUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.RUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.SUPPORTS_NARROW_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.WUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXI.WUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.HAS_TKEEP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.HAS_TLAST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.HAS_TREADY">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.HAS_TSTRB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.LAYERED_METADATA">undef</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.TDATA_NUM_BYTES">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.TDEST_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.TID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.M_AXIS.TUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.READ_CLK.ASSOCIATED_BUSIF"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.READ_CLK.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.READ_CLK.ASSOCIATED_RESET"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.READ_CLK.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.READ_CLK.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.READ_CLK.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.READ_CLK.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.READ_CLK.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.SLAVE_ACLK.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.SLAVE_ACLK.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.SLAVE_ACLK.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.SLAVE_ACLK.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.SLAVE_ACLK.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.SLAVE_ACLK.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.SLAVE_ARESETN.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.ADDR_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.ARUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.AWUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.BUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.DATA_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_BRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_CACHE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_LOCK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_PROT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_QOS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_REGION">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_RRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_WSTRB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.ID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.MAX_BURST_LENGTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.NUM_READ_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.NUM_READ_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.NUM_WRITE_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.NUM_WRITE_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.PROTOCOL">AXI4LITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.READ_WRITE_MODE">READ_WRITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.RUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.RUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.SUPPORTS_NARROW_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.WUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI.WUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.HAS_TKEEP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.HAS_TLAST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.HAS_TREADY">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.HAS_TSTRB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.LAYERED_METADATA">undef</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.TDATA_NUM_BYTES">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.TDEST_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.TID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXIS.TUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.WRITE_CLK.ASSOCIATED_BUSIF"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.WRITE_CLK.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.WRITE_CLK.ASSOCIATED_RESET"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.WRITE_CLK.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.WRITE_CLK.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.WRITE_CLK.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.WRITE_CLK.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.WRITE_CLK.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ADD_NGC_CONSTRAINT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_APPLICATION_TYPE_AXIS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_APPLICATION_TYPE_RACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_APPLICATION_TYPE_RDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_APPLICATION_TYPE_WACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_APPLICATION_TYPE_WDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_APPLICATION_TYPE_WRCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXIS_TDATA_WIDTH">8</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXIS_TDEST_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXIS_TID_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXIS_TKEEP_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXIS_TSTRB_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXIS_TUSER_WIDTH">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXIS_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_ADDR_WIDTH">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_ARUSER_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_AWUSER_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_BUSER_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_DATA_WIDTH">64</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_ID_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_LEN_WIDTH">8</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_LOCK_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_RUSER_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_TYPE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AXI_WUSER_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_COMMON_CLOCK">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_COUNT_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DATA_COUNT_WIDTH">9</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DEFAULT_VALUE">BlankString</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIN_WIDTH">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIN_WIDTH_AXIS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIN_WIDTH_RACH">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIN_WIDTH_RDCH">64</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIN_WIDTH_WACH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIN_WIDTH_WDCH">64</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIN_WIDTH_WRCH">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DOUT_RST_VAL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DOUT_WIDTH">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ENABLE_RLOCS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ENABLE_RST_SYNC">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_EN_SAFETY_CKT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ERROR_INJECTION_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ERROR_INJECTION_TYPE_AXIS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ERROR_INJECTION_TYPE_RACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ERROR_INJECTION_TYPE_RDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ERROR_INJECTION_TYPE_WACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ERROR_INJECTION_TYPE_WDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ERROR_INJECTION_TYPE_WRCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_FAMILY">zynquplus</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_FULL_FLAGS_RST_VAL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_ALMOST_EMPTY">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_ALMOST_FULL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXIS_TDATA">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXIS_TDEST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXIS_TID">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXIS_TKEEP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXIS_TLAST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXIS_TREADY">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXIS_TSTRB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXIS_TUSER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXI_ARUSER">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXI_AWUSER">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXI_BUSER">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXI_ID">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXI_RD_CHANNEL">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXI_RUSER">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXI_WR_CHANNEL">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_AXI_WUSER">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_BACKUP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_DATA_COUNT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_DATA_COUNTS_AXIS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_DATA_COUNTS_RACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_DATA_COUNTS_RDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_DATA_COUNTS_WACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_DATA_COUNTS_WDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_DATA_COUNTS_WRCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_INT_CLK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_MASTER_CE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_MEMINIT_FILE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_OVERFLOW">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_PROG_FLAGS_AXIS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_PROG_FLAGS_RACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_PROG_FLAGS_RDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_PROG_FLAGS_WACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_PROG_FLAGS_WDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_PROG_FLAGS_WRCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_RD_DATA_COUNT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_RD_RST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_RST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_SLAVE_CE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_SRST">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_UNDERFLOW">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_VALID">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_WR_ACK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_WR_DATA_COUNT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_WR_RST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_IMPLEMENTATION_TYPE">6</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_IMPLEMENTATION_TYPE_AXIS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_IMPLEMENTATION_TYPE_RACH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_IMPLEMENTATION_TYPE_RDCH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_IMPLEMENTATION_TYPE_WACH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_IMPLEMENTATION_TYPE_WDCH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_IMPLEMENTATION_TYPE_WRCH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INIT_WR_PNTR_VAL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INTERFACE_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MEMORY_TYPE">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MIF_FILE_NAME">BlankString</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MSGON_VAL">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OPTIMIZATION_MODE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OVERFLOW_LOW">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_POWER_SAVING_MODE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRELOAD_LATENCY">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRELOAD_REGS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_FIFO_TYPE">512x36</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_FIFO_TYPE_AXIS">1kx18</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_FIFO_TYPE_RACH">512x36</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_FIFO_TYPE_RDCH">512x72</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_FIFO_TYPE_WACH">512x36</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_FIFO_TYPE_WDCH">512x72</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_FIFO_TYPE_WRCH">512x36</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_THRESH_ASSERT_VAL">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_THRESH_ASSERT_VAL_AXIS">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_THRESH_ASSERT_VAL_RACH">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_THRESH_ASSERT_VAL_RDCH">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_THRESH_ASSERT_VAL_WACH">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_THRESH_ASSERT_VAL_WDCH">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_THRESH_ASSERT_VAL_WRCH">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_THRESH_NEGATE_VAL">3</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_TYPE_AXIS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_TYPE_RACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_TYPE_RDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_TYPE_WACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_TYPE_WDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_EMPTY_TYPE_WRCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_THRESH_ASSERT_VAL">510</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_THRESH_ASSERT_VAL_AXIS">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_THRESH_ASSERT_VAL_RACH">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_THRESH_ASSERT_VAL_RDCH">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_THRESH_ASSERT_VAL_WACH">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_THRESH_ASSERT_VAL_WDCH">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_THRESH_ASSERT_VAL_WRCH">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_THRESH_NEGATE_VAL">509</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_TYPE_AXIS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_TYPE_RACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_TYPE_RDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_TYPE_WACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_TYPE_WDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PROG_FULL_TYPE_WRCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RACH_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RDCH_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RD_DATA_COUNT_WIDTH">10</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RD_DEPTH">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RD_FREQ">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RD_PNTR_WIDTH">10</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_REG_SLICE_MODE_AXIS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_REG_SLICE_MODE_RACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_REG_SLICE_MODE_RDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_REG_SLICE_MODE_WACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_REG_SLICE_MODE_WDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_REG_SLICE_MODE_WRCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SELECT_XPM">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SYNCHRONIZER_STAGE">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_UNDERFLOW_LOW">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_COMMON_OVERFLOW">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_COMMON_UNDERFLOW">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_DEFAULT_SETTINGS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_DOUT_RST">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_ECC">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_ECC_AXIS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_ECC_RACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_ECC_RDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_ECC_WACH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_ECC_WDCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_ECC_WRCH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_EMBEDDED_REG">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_FIFO16_FLAGS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_FWFT_DATA_COUNT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_PIPELINE_REG">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_VALID_LOW">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WACH_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WDCH_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WRCH_TYPE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_ACK_LOW">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_DATA_COUNT_WIDTH">9</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_DEPTH">512</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_DEPTH_AXIS">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_DEPTH_RACH">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_DEPTH_RDCH">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_DEPTH_WACH">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_DEPTH_WDCH">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_DEPTH_WRCH">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_FREQ">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_PNTR_WIDTH">9</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_PNTR_WIDTH_AXIS">10</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_PNTR_WIDTH_RACH">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_PNTR_WIDTH_RDCH">10</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_PNTR_WIDTH_WACH">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_PNTR_WIDTH_WDCH">10</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_PNTR_WIDTH_WRCH">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_WR_RESPONSE_LATENCY">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ADDRESS_WIDTH">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ARUSER_Width">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.AWUSER_Width">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Add_NGC_Constraint_AXI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Almost_Empty_Flag">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Almost_Full_Flag">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.BUSER_Width">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.C_SELECT_XPM">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Clock_Enable_Type">Slave_Interface_Clock_Enable</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Clock_Type_AXI">Common_Clock</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Component_Name">fifo_data_to_stream</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.DATA_WIDTH">64</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Data_Count">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Data_Count_Width">9</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Disable_Timing_Violations">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Disable_Timing_Violations_AXI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Dout_Reset_Value">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Empty_Threshold_Assert_Value">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Empty_Threshold_Assert_Value_axis">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Empty_Threshold_Assert_Value_rach">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Empty_Threshold_Assert_Value_rdch">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Empty_Threshold_Assert_Value_wach">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Empty_Threshold_Assert_Value_wdch">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Empty_Threshold_Assert_Value_wrch">1022</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Empty_Threshold_Negate_Value">3</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_Common_Overflow">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_Common_Underflow">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_Data_Counts_axis">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_Data_Counts_rach">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_Data_Counts_rdch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_Data_Counts_wach">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_Data_Counts_wdch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_Data_Counts_wrch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_ECC">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_ECC_Type">Hard_ECC</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_ECC_axis">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_ECC_rach">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_ECC_rdch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_ECC_wach">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_ECC_wdch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_ECC_wrch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_Reset_Synchronization">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_Safety_Circuit">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_TLAST">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_TREADY">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Application_Type_axis">Data_FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Application_Type_rach">Data_FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Application_Type_rdch">Data_FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Application_Type_wach">Data_FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Application_Type_wdch">Data_FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Application_Type_wrch">Data_FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Implementation_axis">Common_Clock_Block_RAM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Implementation_rach">Common_Clock_Block_RAM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Implementation_rdch">Common_Clock_Block_RAM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Implementation_wach">Common_Clock_Block_RAM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Implementation_wdch">Common_Clock_Block_RAM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FIFO_Implementation_wrch">Common_Clock_Block_RAM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Fifo_Implementation">Common_Clock_Builtin_FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Full_Flags_Reset_Value">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Full_Threshold_Assert_Value">510</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Full_Threshold_Assert_Value_axis">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Full_Threshold_Assert_Value_rach">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Full_Threshold_Assert_Value_rdch">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Full_Threshold_Assert_Value_wach">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Full_Threshold_Assert_Value_wdch">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Full_Threshold_Assert_Value_wrch">1023</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Full_Threshold_Negate_Value">509</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.HAS_ACLKEN">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.HAS_TKEEP">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.HAS_TSTRB">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.INTERFACE_TYPE">Native</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Dbit_Error">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Dbit_Error_axis">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Dbit_Error_rach">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Dbit_Error_rdch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Dbit_Error_wach">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Dbit_Error_wdch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Dbit_Error_wrch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Sbit_Error">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Sbit_Error_axis">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Sbit_Error_rach">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Sbit_Error_rdch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Sbit_Error_wach">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Sbit_Error_wdch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Inject_Sbit_Error_wrch">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Input_Data_Width">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Input_Depth">512</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Input_Depth_axis">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Input_Depth_rach">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Input_Depth_rdch">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Input_Depth_wach">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Input_Depth_wdch">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Input_Depth_wrch">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Master_interface_Clock_enable_memory_mapped">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Output_Data_Width">16</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Output_Depth">1024</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Output_Register_Type">Embedded_Reg</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Overflow_Flag">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Overflow_Flag_AXI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Overflow_Sense">Active_High</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Overflow_Sense_AXI">Active_High</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PROTOCOL">AXI4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Performance_Options">Standard_FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Empty_Type">No_Programmable_Empty_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Empty_Type_axis">No_Programmable_Empty_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Empty_Type_rach">No_Programmable_Empty_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Empty_Type_rdch">No_Programmable_Empty_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Empty_Type_wach">No_Programmable_Empty_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Empty_Type_wdch">No_Programmable_Empty_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Empty_Type_wrch">No_Programmable_Empty_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Full_Type">No_Programmable_Full_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Full_Type_axis">No_Programmable_Full_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Full_Type_rach">No_Programmable_Full_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Full_Type_rdch">No_Programmable_Full_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Full_Type_wach">No_Programmable_Full_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Full_Type_wdch">No_Programmable_Full_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Programmable_Full_Type_wrch">No_Programmable_Full_Threshold</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.READ_WRITE_MODE">READ_WRITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.RUSER_Width">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Read_Clock_Frequency">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Read_Data_Count">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Read_Data_Count_Width">10</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_Slice_Mode_axis">Fully_Registered</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_Slice_Mode_rach">Fully_Registered</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_Slice_Mode_rdch">Fully_Registered</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_Slice_Mode_wach">Fully_Registered</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_Slice_Mode_wdch">Fully_Registered</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Register_Slice_Mode_wrch">Fully_Registered</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Pin">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Reset_Type">Synchronous_Reset</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Slave_interface_Clock_enable_memory_mapped">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.TDATA_NUM_BYTES">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.TDEST_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.TID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.TKEEP_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.TSTRB_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.TUSER_WIDTH">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Underflow_Flag">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Underflow_Flag_AXI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Underflow_Sense">Active_High</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Underflow_Sense_AXI">Active_High</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_Dout_Reset">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_Embedded_Registers">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_Embedded_Registers_axis">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Use_Extra_Logic">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Valid_Flag">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Valid_Sense">Active_High</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.WUSER_Width">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Acknowledge_Flag">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Acknowledge_Sense">Active_High</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Clock_Frequency">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Data_Count">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Write_Data_Count_Width">9</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.asymmetric_port_width">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.axis_type">FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.dynamic_power_saving">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ecc_pipeline_reg">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.enable_low_latency">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.enable_read_pointer_increment_by2">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.rach_type">FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.rdch_type">FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.synchronization_stages">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.synchronization_stages_axi">2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.use_dout_register">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.wach_type">FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.wdch_type">FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.wrch_type">FIFO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.ARCHITECTURE">zynquplus</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BASE_BOARD_PART">xilinx.com:zcu102:part0:3.4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BOARD_CONNECTIONS"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.DEVICE">xczu9eg</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PACKAGE">ffvb1156</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PREFHDL">VERILOG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SILICON_REVISION"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SIMULATOR_LANGUAGE">MIXED</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SPEEDGRADE">-2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.STATIC_POWER"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.TEMPERATURE_GRADE">E</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_CUSTOMIZATION">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_GENERATION">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPCONTEXT">IP_Flow</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPREVISION">7</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.MANAGED">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.OUTPUTDIR">../../../prj/zcu_pulse_channel.gen/sources_1/ip/fifo_data_to_stream</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SELECTEDSIMMODEL"/>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SHAREDDIR">.</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SWVERSION">2022.1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SYNTHESISFLOW">OUT_OF_CONTEXT</spirit:configurableElementValue>
+      </spirit:configurableElementValues>
+      <spirit:vendorExtensions>
+        <xilinx:componentInstanceExtensions>
+          <xilinx:configElementInfos>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.ADDR_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.DATA_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_BRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_BURST" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_CACHE" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_LOCK" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_PROT" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_QOS" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_REGION" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_RRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.HAS_WSTRB" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXI.PROTOCOL" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXIS.HAS_TREADY" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.M_AXIS.TDATA_NUM_BYTES" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.ADDR_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.DATA_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_BRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_BURST" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_CACHE" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_LOCK" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_PROT" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_QOS" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_REGION" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_RRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.HAS_WSTRB" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI.PROTOCOL" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXIS.HAS_TREADY" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXIS.TDATA_NUM_BYTES" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Data_Count_Width" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Full_Threshold_Assert_Value" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Full_Threshold_Negate_Value" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Input_Data_Width" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Input_Depth" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Output_Data_Width" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Output_Depth" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Read_Data_Count_Width" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.Write_Data_Count_Width" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.asymmetric_port_width" xilinx:valueSource="user"/>
+          </xilinx:configElementInfos>
+          <xilinx:boundaryDescriptionInfo>
+            <xilinx:boundaryDescription xilinx:boundaryDescriptionJSON="{
+              &quot;schema&quot;: &quot;xilinx.com:schema:json_boundary:1.0&quot;,
+              &quot;boundary&quot;: {
+                &quot;ports&quot;: {
+                  &quot;clk&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;srst&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;din&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;size_left&quot;: &quot;31&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;wr_en&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;rd_en&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;dout&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;size_left&quot;: &quot;15&quot;, &quot;size_right&quot;: &quot;0&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;full&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;driver_value&quot;: &quot;0x0&quot; } ],
+                  &quot;empty&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;driver_value&quot;: &quot;0x1&quot; } ],
+                  &quot;wr_rst_busy&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;rd_rst_busy&quot;: [ { &quot;direction&quot;: &quot;out&quot;, &quot;driver_value&quot;: &quot;0&quot; } ]
+                },
+                &quot;interfaces&quot;: {
+                  &quot;core_clk&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:signal:clock:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:signal:clock_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;FREQ_HZ&quot;: [ { &quot;value&quot;: &quot;100000000&quot;, &quot;resolve_type&quot;: &quot;user&quot;, &quot;format&quot;: &quot;long&quot;, &quot;usage&quot;: &quot;all&quot; } ],
+                      &quot;FREQ_TOLERANCE_HZ&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;PHASE&quot;: [ { &quot;value&quot;: &quot;0.0&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;float&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;CLK_DOMAIN&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_BUSIF&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_PORT&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_RESET&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_static_object&quot;: false } ],
+                      &quot;INSERT_VIP&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;user&quot;, &quot;format&quot;: &quot;long&quot;, &quot;usage&quot;: &quot;simulation.rtl&quot;, &quot;is_static_object&quot;: false } ]
+                    },
+                    &quot;port_maps&quot;: {
+                      &quot;CLK&quot;: [ { &quot;physical_name&quot;: &quot;clk&quot; } ]
+                    }
+                  },
+                  &quot;FIFO_WRITE&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:interface:fifo_write:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:interface:fifo_write_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;port_maps&quot;: {
+                      &quot;FULL&quot;: [ { &quot;physical_name&quot;: &quot;full&quot; } ],
+                      &quot;WR_DATA&quot;: [ { &quot;physical_name&quot;: &quot;din&quot; } ],
+                      &quot;WR_EN&quot;: [ { &quot;physical_name&quot;: &quot;wr_en&quot; } ]
+                    }
+                  },
+                  &quot;FIFO_READ&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:interface:fifo_read:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:interface:fifo_read_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;port_maps&quot;: {
+                      &quot;EMPTY&quot;: [ { &quot;physical_name&quot;: &quot;empty&quot; } ],
+                      &quot;RD_DATA&quot;: [ { &quot;physical_name&quot;: &quot;dout&quot; } ],
+                      &quot;RD_EN&quot;: [ { &quot;physical_name&quot;: &quot;rd_en&quot; } ]
+                    }
+                  }
+                }
+              }
+            }"/>
+          </xilinx:boundaryDescriptionInfo>
+        </xilinx:componentInstanceExtensions>
+      </spirit:vendorExtensions>
+    </spirit:componentInstance>
+  </spirit:componentInstances>
+</spirit:design>

tools/xilinx-zcu/pinout_zcu.xdc

@@ -0,0 +1,73 @@
+## 300MHz Clock from USER_SI570
+set_property PACKAGE_PIN AL7      [get_ports "p_clk_n"] ;# Bank  64 VCCO - VCC1V2   - IO_L12N_T1U_N11_GC_64
+set_property IOSTANDARD  DIFF_SSTL12 [get_ports "p_clk_n"] ;# Bank  64 VCCO - VCC1V2   - IO_L12N_T1U_N11_GC_64
+set_property PACKAGE_PIN AL8      [get_ports "p_clk_p"] ;# Bank  64 VCCO - VCC1V2   - IO_L12P_T1U_N10_GC_64
+set_property IOSTANDARD  DIFF_SSTL12 [get_ports "p_clk_p"] ;# Bank  64 VCCO - VCC1V2   - IO_L12P_T1U_N10_GC_64
+
+## Buttons SW_C
+# set_property -dict {PACKAGE_PIN C17 IOSTANDARD LVCMOS33} [get_ports p_reset]
+
+set_property PACKAGE_PIN AG13     [get_ports "p_reset"] ;# Bank  44 VCCO - VCC3V3   - IO_L10N_AD2N_44
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_reset"] ;# Bank  44 VCCO - VCC3V3   - IO_L10N_AD2N_44
+## LEDs
+set_property PACKAGE_PIN AG14     [get_ports "p_leds_0"] ;# Bank  44 VCCO - VCC3V3   - IO_L10P_AD2P_44
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_leds_0"] ;# Bank  44 VCCO - VCC3V3   - IO_L10P_AD2P_44
+set_property PACKAGE_PIN AF13     [get_ports "p_leds_1"] ;# Bank  44 VCCO - VCC3V3   - IO_L9N_AD3N_44
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_leds_1"] ;# Bank  44 VCCO - VCC3V3   - IO_L9N_AD3N_44
+set_property PACKAGE_PIN AE13     [get_ports "p_leds_2"] ;# Bank  44 VCCO - VCC3V3   - IO_L9P_AD3P_44
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_leds_2"] ;# Bank  44 VCCO - VCC3V3   - IO_L9P_AD3P_44
+set_property PACKAGE_PIN AJ14     [get_ports "p_leds_3"] ;# Bank  44 VCCO - VCC3V3   - IO_L8N_HDGC_AD4N_44
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_leds_3"] ;# Bank  44 VCCO - VCC3V3   - IO_L8N_HDGC_AD4N_44
+set_property PACKAGE_PIN AJ15     [get_ports "p_leds_4"] ;# Bank  44 VCCO - VCC3V3   - IO_L8P_HDGC_AD4P_44
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_leds_4"] ;# Bank  44 VCCO - VCC3V3   - IO_L8P_HDGC_AD4P_44
+set_property PACKAGE_PIN AH13     [get_ports "p_leds_5"] ;# Bank  44 VCCO - VCC3V3   - IO_L7N_HDGC_AD5N_44
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_leds_5"] ;# Bank  44 VCCO - VCC3V3   - IO_L8P_HDGC_AD4P_44
+
+# set_property -dict {PACKAGE_PIN A17 IOSTANDARD LVCMOS33} [get_ports {p_leds0_rgb[0]}]
+# set_property -dict {PACKAGE_PIN B16 IOSTANDARD LVCMOS33} [get_ports {p_leds0_rgb[1]}]
+# set_property -dict {PACKAGE_PIN B17 IOSTANDARD LVCMOS33} [get_ports {p_leds0_rgb[2]}]
+
+# set_property -dict {PACKAGE_PIN A16 IOSTANDARD LVCMOS33} [get_ports {p_leds1_rgb[0]}]
+# set_property -dict {PACKAGE_PIN A18 IOSTANDARD LVCMOS33} [get_ports {p_leds1_rgb[1]}]
+# set_property -dict {PACKAGE_PIN A19 IOSTANDARD LVCMOS33} [get_ports {p_leds1_rgb[2]}]
+
+
+## Pmod Header J55
+set_property PACKAGE_PIN A20      [get_ports "p_dc0_cs_n"] ;# Bank  47 VCCO - VCC3V3   - IO_L12N_AD0N_47
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc0_cs_n"] ;# Bank  47 VCCO - VCC3V3   - IO_L12N_AD0N_47
+set_property PACKAGE_PIN B20      [get_ports "p_dc0_mosi"] ;# Bank  47 VCCO - VCC3V3   - IO_L12P_AD0P_47
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc0_mosi"] ;# Bank  47 VCCO - VCC3V3   - IO_L12P_AD0P_47
+# set_property PACKAGE_PIN A22      [get_ports "p_dc0_nc"] ;# Bank  47 VCCO - VCC3V3   - IO_L11N_AD1N_47
+# set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc0_nc"] ;# Bank  47 VCCO - VCC3V3   - IO_L11N_AD1N_47
+set_property PACKAGE_PIN A21      [get_ports "p_dc0_sclk"] ;# Bank  47 VCCO - VCC3V3   - IO_L11P_AD1P_47
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc0_sclk"] ;# Bank  47 VCCO - VCC3V3   - IO_L11P_AD1P_47
+set_property PACKAGE_PIN B21      [get_ports "p_dc1_cs_n"] ;# Bank  47 VCCO - VCC3V3   - IO_L10N_AD2N_47
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc1_cs_n"] ;# Bank  47 VCCO - VCC3V3   - IO_L10N_AD2N_47
+set_property PACKAGE_PIN C21      [get_ports "p_dc1_mosi"] ;# Bank  47 VCCO - VCC3V3   - IO_L10P_AD2P_47
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc1_mosi"] ;# Bank  47 VCCO - VCC3V3   - IO_L10P_AD2P_47
+# set_property PACKAGE_PIN C22      [get_ports "p_dc1_nc"] ;# Bank  47 VCCO - VCC3V3   - IO_L9N_AD3N_47
+# set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc1_nc"] ;# Bank  47 VCCO - VCC3V3   - IO_L9N_AD3N_47
+set_property PACKAGE_PIN D21      [get_ports "p_dc1_sclk"] ;# Bank  47 VCCO - VCC3V3   - IO_L9P_AD3P_47
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc1_sclk"] ;# Bank  47 VCCO - VCC3V3   - IO_L9P_AD3P_47
+
+## Pmod Header J87
+set_property PACKAGE_PIN D20      [get_ports "p_dc2_cs_n"] ;# Bank  47 VCCO - VCC3V3   - IO_L8N_HDGC_AD4N_47
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc2_cs_n"] ;# Bank  47 VCCO - VCC3V3   - IO_L8N_HDGC_AD4N_47
+set_property PACKAGE_PIN E20      [get_ports "p_dc2_mosi"] ;# Bank  47 VCCO - VCC3V3   - IO_L8P_HDGC_AD4P_47
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc2_mosi"] ;# Bank  47 VCCO - VCC3V3   - IO_L8P_HDGC_AD4P_47
+set_property PACKAGE_PIN E22      [get_ports "p_dc2_sclk"] ;# Bank  47 VCCO - VCC3V3   - IO_L7N_HDGC_AD5N_47
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_dc2_sclk"] ;# Bank  47 VCCO - VCC3V3   - IO_L7N_HDGC_AD5N_47
+
+# UART
+set_property PACKAGE_PIN E13      [get_ports "p_serial_rxd"] ;# Bank  49 VCCO - VCC3V3   - IO_L12N_AD8N_49
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_serial_rxd"] ;# Bank  49 VCCO - VCC3V3   - IO_L12N_AD8N_49
+set_property PACKAGE_PIN F13      [get_ports "p_serial_txd"] ;# Bank  49 VCCO - VCC3V3   - IO_L12P_AD8P_49
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_serial_txd"] ;# Bank  49 VCCO - VCC3V3   - IO_L12P_AD8P_49
+
+# UART Debug (unsure, maybe just indicator LEDs?)
+set_property PACKAGE_PIN D12      [get_ports "p_debug_out[0]"] ;# Bank  49 VCCO - VCC3V3   - IO_L11N_AD9N_49
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_debug_out[0]"] ;# Bank  49 VCCO - VCC3V3   - IO_L11N_AD9N_49
+set_property PACKAGE_PIN E12      [get_ports "p_debug_out[1]"] ;# Bank  49 VCCO - VCC3V3   - IO_L11P_AD9P_49
+set_property IOSTANDARD  LVCMOS33 [get_ports "p_debug_out[1]"] ;# Bank  49 VCCO - VCC3V3   - IO_L11P_AD9P_49
+
+

tools/xilinx-zcu/qlaser_timing_zcu.xdc

@@ -0,0 +1,3 @@
+## 125MHz Clock from Ethernet PHY
+create_clock -period 3.333 -name sys_clk_pin -waveform {0.000 1.667} -add [get_ports p_clk_p]
+create_clock -period 3.333 -name sys_clk_pin -waveform {0.000 1.667} -add [get_ports p_clk_n]

tools/xilinx-zcu/set_usercode_zcu.xdc

@@ -0,0 +1,29 @@
+##---------------------------------------------------------------------------------------
+## Filename : set_usercode.xdc
+##
+## Vivado onstraint file to set user version number into the bitfile
+##---------------------------------------------------------------------------------------
+
+#----------------------------------------------------------------------------------------
+#-- Usercode major revisions
+#----------------------------------------------------------------------------------------
+#-- 0x0000_NNNN     : Early debug and test. No PMODs,ZMODs, DACs etc
+#-- 0x1AC0_NNNN     : DC PMODs, 4? single bit pulses.  NNN incremented each bitfile
+#-- 0x1DC0_NNNN     : DC PMODs DAC versions.           NNN incremented each bitfile
+#-- 0x2AC0_NNNN     : DC PMODs, AC ZMODs. 4 channel    NNN incremented each bitfile
+#-- 0x3AC0_NNNN     : DC PMODs, JESD AC (16ch Abaco board)    NNN incremented each bitfile
+#
+#----------------------------------------------------------------------------------------
+#-- Usercode history
+#----------------------------------------------------------------------------------------
+#-- 0x1DC0_0001     : Original release 
+#-- 0x1DC0_0002     : Modified double blink and added QSPI and SD into the PS1 block
+#-- 0x1DC0_0003     : SD pins on 1.8V bank. Add SD_CD on MIO47
+#-- 0x1DC0_0004     : SD clock dropped from 100MHz to 20Mhz
+#-- 0x1DC0_0005     : Restore internal reference enable for pmod DACs
+#-- 0x3AC0_0006     : Existing working codes ported to ZCU102
+#--
+#----------------------------------------------------------------------------------------
+# In VHDL package : constant C_QLASER_VERSION   : std_logic_vector(31 downto 0)
+#----------------------------------------------------------------------------------------
+set_property BITSTREAM.CONFIG.USERID 32'h3AC00006 [current_design]

tools/xilinx/README.md

@@ -0,0 +1 @@
+

tools/xilinx/build_project.tcl

@@ -0,0 +1,597 @@
+#*****************************************************************************************
+# Vivado (TM) v2018.2 (64-bit)
+#
+# build_project.tcl: Tcl script for re-creating project 'qlaser_eclypse7'
+#
+# Generated by Vivado on Thu Feb 16 16:07:58 -0800 2023
+# IP Build 2256618 on Thu Jun 14 22:10:49 MDT 2018
+#
+# This file contains the Vivado Tcl commands for re-creating the project to the state*
+# when this script was generated. In order to re-create the project, please source this
+# file in the Vivado Tcl Shell.
+#
+# * Note that the runs in the created project will be configured the same way as the
+#   original project, however they will not be launched automatically. To regenerate the
+#   run results please launch the synthesis/implementation runs as needed.
+#
+#*****************************************************************************************
+# NOTE: In order to use this script for source control purposes, please make sure that the
+#       following files are added to the source control system:-
+#
+# 1. This project restoration tcl script (build_project.tcl) that was generated.
+#
+# 2. The following source(s) files that were local or imported into the original project.
+#    (Please see the '$orig_proj_dir' and '$origin_dir' variable setting below at the start of the script)
+#
+#    "D:/Work/UW-Quantum/tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/bd/ps1/ps1.bd"
+#    "D:/Work/UW-Quantum/tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/bd/ps1/hdl/ps1_wrapper.vhd"
+#    "D:/Work/UW-Quantum/tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/ip/clkpll/clkpll.xci"
+#
+# 3. The following remote source files that were added to the original project:-
+#
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_pkg.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/blink.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/clkreset.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/serial_io/nc3_cpu2uart.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/serial_io/nc3_serial_pkg_100MHz.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/serial_io/nc3_uart.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/serial_io/nc3_uart2cpu.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/serial_io/qlaser_cpuint_serial.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_dac_dc_package.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_spi.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_dacs_dc.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_dacs_pulse.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_version_pkg.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_misc.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/src/hdl/fpga/qlaser_top.vhd"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/tools/xilinx/pinout.xdc"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/tools/xilinx/set_usercode.xdc"
+#    "D:/Work/UW-Quantum/github/NANO_QLASER/tools/xilinx/qlaser_timing.xdc"
+#
+#*****************************************************************************************
+
+# Set the reference directory for source file relative paths (by default the value is script directory path)
+set origin_dir "."
+
+# Use origin directory path location variable, if specified in the tcl shell
+if { [info exists ::origin_dir_loc] } {
+  set origin_dir $::origin_dir_loc
+}
+
+# Set the project name
+set _xil_proj_name_ "qlaser_eclypse7"
+
+# Use project name variable, if specified in the tcl shell
+if { [info exists ::user_project_name] } {
+  set _xil_proj_name_ $::user_project_name
+}
+
+variable script_file
+set script_file "build_project.tcl"
+
+# Help information for this script
+proc help {} {
+  variable script_file
+  puts "\nDescription:"
+  puts "Recreate a Vivado project from this script. The created project will be"
+  puts "functionally equivalent to the original project for which this script was"
+  puts "generated. The script contains commands for creating a project, filesets,"
+  puts "runs, adding/importing sources and setting properties on various objects.\n"
+  puts "Syntax:"
+  puts "$script_file"
+  puts "$script_file -tclargs \[--origin_dir <path>\]"
+  puts "$script_file -tclargs \[--project_name <name>\]"
+  puts "$script_file -tclargs \[--help\]\n"
+  puts "Usage:"
+  puts "Name                   Description"
+  puts "-------------------------------------------------------------------------"
+  puts "\[--origin_dir <path>\]  Determine source file paths wrt this path. Default"
+  puts "                       origin_dir path value is \".\", otherwise, the value"
+  puts "                       that was set with the \"-paths_relative_to\" switch"
+  puts "                       when this script was generated.\n"
+  puts "\[--project_name <name>\] Create project with the specified name. Default"
+  puts "                       name is the name of the project from where this"
+  puts "                       script was generated.\n"
+  puts "\[--help\]               Print help information for this script"
+  puts "-------------------------------------------------------------------------\n"
+  exit 0
+}
+
+if { $::argc > 0 } {
+  for {set i 0} {$i < $::argc} {incr i} {
+    set option [string trim [lindex $::argv $i]]
+    switch -regexp -- $option {
+      "--origin_dir"   { incr i; set origin_dir [lindex $::argv $i] }
+      "--project_name" { incr i; set _xil_proj_name_ [lindex $::argv $i] }
+      "--help"         { help }
+      default {
+        if { [regexp {^-} $option] } {
+          puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
+          return 1
+        }
+      }
+    }
+  }
+}
+
+# Set the directory path for the original project from where this script was exported
+set orig_proj_dir "[file normalize "$origin_dir/../../../../tools/Vivado2018_2/qlaser_eclypse7"]"
+
+# Create project
+create_project ${_xil_proj_name_} ./${_xil_proj_name_} -part xc7z020clg484-1
+
+# Set the directory path for the new project
+set proj_dir [get_property directory [current_project]]
+
+# Reconstruct message rules
+# None
+
+# Set project properties
+set obj [current_project]
+set_property -name "board_part" -value "digilentinc.com:eclypse-z7:part0:1.1" -objects $obj
+set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
+set_property -name "dsa.accelerator_binary_content" -value "bitstream" -objects $obj
+set_property -name "dsa.accelerator_binary_format" -value "xclbin2" -objects $obj
+set_property -name "dsa.board_id" -value "eclypse-z7" -objects $obj
+set_property -name "dsa.description" -value "Vivado generated DSA" -objects $obj
+set_property -name "dsa.dr_bd_base_address" -value "0" -objects $obj
+set_property -name "dsa.emu_dir" -value "emu" -objects $obj
+set_property -name "dsa.flash_interface_type" -value "bpix16" -objects $obj
+set_property -name "dsa.flash_offset_address" -value "0" -objects $obj
+set_property -name "dsa.flash_size" -value "1024" -objects $obj
+set_property -name "dsa.host_architecture" -value "x86_64" -objects $obj
+set_property -name "dsa.host_interface" -value "pcie" -objects $obj
+set_property -name "dsa.num_compute_units" -value "60" -objects $obj
+set_property -name "dsa.platform_state" -value "pre_synth" -objects $obj
+set_property -name "dsa.uses_pr" -value "1" -objects $obj
+set_property -name "dsa.vendor" -value "xilinx" -objects $obj
+set_property -name "dsa.version" -value "0.0" -objects $obj
+set_property -name "enable_vhdl_2008" -value "1" -objects $obj
+set_property -name "ip_cache_permissions" -value "read write" -objects $obj
+set_property -name "ip_output_repo" -value "$proj_dir/${_xil_proj_name_}.cache/ip" -objects $obj
+set_property -name "mem.enable_memory_map_generation" -value "1" -objects $obj
+set_property -name "sim.central_dir" -value "$proj_dir/${_xil_proj_name_}.ip_user_files" -objects $obj
+set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
+set_property -name "simulator_language" -value "Mixed" -objects $obj
+set_property -name "target_language" -value "VHDL" -objects $obj
+set_property -name "webtalk.activehdl_export_sim" -value "6" -objects $obj
+set_property -name "webtalk.ies_export_sim" -value "6" -objects $obj
+set_property -name "webtalk.modelsim_export_sim" -value "6" -objects $obj
+set_property -name "webtalk.questa_export_sim" -value "6" -objects $obj
+set_property -name "webtalk.riviera_export_sim" -value "6" -objects $obj
+set_property -name "webtalk.vcs_export_sim" -value "6" -objects $obj
+set_property -name "webtalk.xsim_export_sim" -value "6" -objects $obj
+set_property -name "xpm_libraries" -value "XPM_CDC XPM_FIFO XPM_MEMORY" -objects $obj
+
+# Create 'sources_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sources_1] ""]} {
+  create_fileset -srcset sources_1
+}
+
+# Set IP repository paths
+set obj [get_filesets sources_1]
+set_property "ip_repo_paths" "[file normalize "$origin_dir/../../../../../Common/IP_GJED"]" $obj
+
+# Rebuild user ip_repo's index before adding any source files
+update_ip_catalog -rebuild
+
+# Set 'sources_1' fileset object
+set obj [get_filesets sources_1]
+set files [list \
+ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_pkg.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/fpga/blink.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/fpga/clkreset.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/serial_io/nc3_cpu2uart.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/serial_io/nc3_serial_pkg_100MHz.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/serial_io/nc3_uart.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/serial_io/nc3_uart2cpu.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/serial_io/qlaser_cpuint_serial.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_dac_dc_package.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_spi.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_dacs_dc.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_dacs_pulse.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_version_pkg.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_misc.vhd"] \
+ [file normalize "${origin_dir}/../../src/hdl/fpga/qlaser_top.vhd"] \
+]
+add_files -norecurse -fileset $obj $files
+
+# Add local files from the original project (-no_copy_sources specified)
+set files [list \
+ [file normalize "${origin_dir}/../../../../tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/bd/ps1/ps1.bd" ]\
+ [file normalize "${origin_dir}/../../../../tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/bd/ps1/hdl/ps1_wrapper.vhd" ]\
+]
+set added_files [add_files -fileset sources_1 $files]
+
+# Set 'sources_1' fileset file properties for remote files
+set file "$origin_dir/../../src/hdl/fpga/qlaser_pkg.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/fpga/blink.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/fpga/clkreset.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/serial_io/nc3_cpu2uart.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/serial_io/nc3_serial_pkg_100MHz.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/serial_io/nc3_uart.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/serial_io/nc3_uart2cpu.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/serial_io/qlaser_cpuint_serial.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/fpga/qlaser_dac_dc_package.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/fpga/qlaser_spi.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/fpga/qlaser_dacs_dc.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/fpga/qlaser_dacs_pulse.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/fpga/qlaser_version_pkg.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/fpga/qlaser_misc.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+set file "$origin_dir/../../src/hdl/fpga/qlaser_top.vhd"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+
+# Set 'sources_1' fileset file properties for local files
+set file "ps1/ps1.bd"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "registered_with_manager" -value "1" -objects $file_obj
+
+set file "hdl/ps1_wrapper.vhd"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "file_type" -value "VHDL" -objects $file_obj
+
+
+# Set 'sources_1' fileset properties
+set obj [get_filesets sources_1]
+set_property -name "top" -value "qlaser_top" -objects $obj
+
+# Set 'sources_1' fileset object
+set obj [get_filesets sources_1]
+# Add local files from the original project (-no_copy_sources specified)
+set files [list \
+ [file normalize "${origin_dir}/../../../../tools/Vivado2018_2/qlaser_eclypse7/qlaser_eclypse7.srcs/sources_1/ip/clkpll/clkpll.xci" ]\
+]
+set added_files [add_files -fileset sources_1 $files]
+
+# Set 'sources_1' fileset file properties for remote files
+# None
+
+# Set 'sources_1' fileset file properties for local files
+set file "clkpll/clkpll.xci"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "generate_files_for_reference" -value "0" -objects $file_obj
+set_property -name "registered_with_manager" -value "1" -objects $file_obj
+if { ![get_property "is_locked" $file_obj] } {
+  set_property -name "synth_checkpoint_mode" -value "Singular" -objects $file_obj
+}
+
+
+# Create 'constrs_1' fileset (if not found)
+if {[string equal [get_filesets -quiet constrs_1] ""]} {
+  create_fileset -constrset constrs_1
+}
+
+# Set 'constrs_1' fileset object
+set obj [get_filesets constrs_1]
+
+# Add/Import constrs file and set constrs file properties
+set file "[file normalize "$origin_dir/pinout.xdc"]"
+set file_added [add_files -norecurse -fileset $obj [list $file]]
+set file "$origin_dir/pinout.xdc"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
+set_property -name "file_type" -value "XDC" -objects $file_obj
+
+# Add/Import constrs file and set constrs file properties
+set file "[file normalize "$origin_dir/set_usercode.xdc"]"
+set file_added [add_files -norecurse -fileset $obj [list $file]]
+set file "$origin_dir/set_usercode.xdc"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
+set_property -name "file_type" -value "XDC" -objects $file_obj
+
+# Add/Import constrs file and set constrs file properties
+set file "[file normalize "$origin_dir/qlaser_timing.xdc"]"
+set file_added [add_files -norecurse -fileset $obj [list $file]]
+set file "$origin_dir/qlaser_timing.xdc"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
+set_property -name "file_type" -value "XDC" -objects $file_obj
+
+# Set 'constrs_1' fileset properties
+set obj [get_filesets constrs_1]
+
+# Create 'sim_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sim_1] ""]} {
+  create_fileset -simset sim_1
+}
+
+# Set 'sim_1' fileset object
+set obj [get_filesets sim_1]
+# Empty (no sources present)
+
+# Set 'sim_1' fileset properties
+set obj [get_filesets sim_1]
+set_property -name "sim_mode" -value "post-implementation" -objects $obj
+set_property -name "top" -value "qlaser_top" -objects $obj
+set_property -name "top_lib" -value "xil_defaultlib" -objects $obj
+
+# Create 'synth_1' run (if not found)
+if {[string equal [get_runs -quiet synth_1] ""]} {
+    create_run -name synth_1 -part xc7z020clg484-1 -flow {Vivado Synthesis 2018} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1
+} else {
+  set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
+  set_property flow "Vivado Synthesis 2018" [get_runs synth_1]
+}
+set obj [get_runs synth_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Synthesis Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'synth_1_synth_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
+  create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
+}
+set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
+if { $obj != "" } {
+
+}
+set obj [get_runs synth_1]
+set_property -name "needs_refresh" -value "1" -objects $obj
+set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj
+
+# set the current synth run
+current_run -synthesis [get_runs synth_1]
+
+# Create 'impl_1' run (if not found)
+if {[string equal [get_runs -quiet impl_1] ""]} {
+    create_run -name impl_1 -part xc7z020clg484-1 -flow {Vivado Implementation 2018} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
+} else {
+  set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
+  set_property flow "Vivado Implementation 2018" [get_runs impl_1]
+}
+set obj [get_runs impl_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Implementation Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'impl_1_init_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_opt_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
+  create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_place_report_io_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_place_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_place_report_control_sets_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
+  create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_place_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_route_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_methodology_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_power_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_route_status_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_bus_skew_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_post_route_phys_opt_report_bus_skew_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0] "" ] } {
+  create_report_config -report_name impl_1_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0]
+if { $obj != "" } {
+
+}
+set obj [get_runs impl_1]
+set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
+set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
+
+# set the current impl run
+current_run -implementation [get_runs impl_1]
+
+puts "INFO: Project created:${_xil_proj_name_}"

tools/xilinx/build_ps1.tcl

@@ -0,0 +1,890 @@
+
+################################################################
+# This is a generated script based on design: ps1
+#
+# Though there are limitations about the generated script,
+# the main purpose of this utility is to make learning
+# IP Integrator Tcl commands easier.
+################################################################
+
+namespace eval _tcl {
+proc get_script_folder {} {
+   set script_path [file normalize [info script]]
+   set script_folder [file dirname $script_path]
+   return $script_folder
+}
+}
+variable script_folder
+set script_folder [_tcl::get_script_folder]
+
+################################################################
+# Check if script is running in correct Vivado version.
+################################################################
+set scripts_vivado_version 2018.2
+set current_vivado_version [version -short]
+
+if { [string first $scripts_vivado_version $current_vivado_version] == -1 } {
+   puts ""
+   catch {common::send_msg_id "BD_TCL-109" "ERROR" "This script was generated using Vivado <$scripts_vivado_version> and is being run in <$current_vivado_version> of Vivado. Please run the script in Vivado <$scripts_vivado_version> then open the design in Vivado <$current_vivado_version>. Upgrade the design by running \"Tools => Report => Report IP Status...\", then run write_bd_tcl to create an updated script."}
+
+   return 1
+}
+
+################################################################
+# START
+################################################################
+
+# To test this script, run the following commands from Vivado Tcl console:
+# source ps1_script.tcl
+
+# If there is no project opened, this script will create a
+# project, but make sure you do not have an existing project
+# <./myproj/project_1.xpr> in the current working folder.
+
+set list_projs [get_projects -quiet]
+if { $list_projs eq "" } {
+   create_project project_1 myproj -part xc7z020clg484-1
+   set_property BOARD_PART digilentinc.com:eclypse-z7:part0:1.1 [current_project]
+}
+
+
+# CHANGE DESIGN NAME HERE
+variable design_name
+set design_name ps1
+
+# If you do not already have an existing IP Integrator design open,
+# you can create a design using the following command:
+#    create_bd_design $design_name
+
+# Creating design if needed
+set errMsg ""
+set nRet 0
+
+set cur_design [current_bd_design -quiet]
+set list_cells [get_bd_cells -quiet]
+
+if { ${design_name} eq "" } {
+   # USE CASES:
+   #    1) Design_name not set
+
+   set errMsg "Please set the variable <design_name> to a non-empty value."
+   set nRet 1
+
+} elseif { ${cur_design} ne "" && ${list_cells} eq "" } {
+   # USE CASES:
+   #    2): Current design opened AND is empty AND names same.
+   #    3): Current design opened AND is empty AND names diff; design_name NOT in project.
+   #    4): Current design opened AND is empty AND names diff; design_name exists in project.
+
+   if { $cur_design ne $design_name } {
+      common::send_msg_id "BD_TCL-001" "INFO" "Changing value of <design_name> from <$design_name> to <$cur_design> since current design is empty."
+      set design_name [get_property NAME $cur_design]
+   }
+   common::send_msg_id "BD_TCL-002" "INFO" "Constructing design in IPI design <$cur_design>..."
+
+} elseif { ${cur_design} ne "" && $list_cells ne "" && $cur_design eq $design_name } {
+   # USE CASES:
+   #    5) Current design opened AND has components AND same names.
+
+   set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
+   set nRet 1
+} elseif { [get_files -quiet ${design_name}.bd] ne "" } {
+   # USE CASES: 
+   #    6) Current opened design, has components, but diff names, design_name exists in project.
+   #    7) No opened design, design_name exists in project.
+
+   set errMsg "Design <$design_name> already exists in your project, please set the variable <design_name> to another value."
+   set nRet 2
+
+} else {
+   # USE CASES:
+   #    8) No opened design, design_name not in project.
+   #    9) Current opened design, has components, but diff names, design_name not in project.
+
+   common::send_msg_id "BD_TCL-003" "INFO" "Currently there is no design <$design_name> in project, so creating one..."
+
+   create_bd_design $design_name
+
+   common::send_msg_id "BD_TCL-004" "INFO" "Making design <$design_name> as current_bd_design."
+   current_bd_design $design_name
+
+}
+
+common::send_msg_id "BD_TCL-005" "INFO" "Currently the variable <design_name> is equal to \"$design_name\"."
+
+if { $nRet != 0 } {
+   catch {common::send_msg_id "BD_TCL-114" "ERROR" $errMsg}
+   return $nRet
+}
+
+set bCheckIPsPassed 1
+##################################################################
+# CHECK IPs
+##################################################################
+set bCheckIPs 1
+if { $bCheckIPs == 1 } {
+   set list_check_ips "\ 
+xilinx.com:ip:axi_bram_ctrl:4.*\
+xilinx.com:ip:blk_mem_gen:8.*\
+xilinx.com:ip:smartconnect:1.*\
+xilinx.com:ip:processing_system7:5.*\
+xilinx.com:ip:proc_sys_reset:5.*\
+"
+
+   set list_ips_missing ""
+   common::send_msg_id "BD_TCL-006" "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."
+
+   foreach ip_vlnv $list_check_ips {
+      set ip_obj [get_ipdefs -all $ip_vlnv]
+      if { $ip_obj eq "" } {
+         lappend list_ips_missing $ip_vlnv
+      }
+   }
+
+   if { $list_ips_missing ne "" } {
+      catch {common::send_msg_id "BD_TCL-115" "ERROR" "The following IPs are not found in the IP Catalog:\n  $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
+      set bCheckIPsPassed 0
+   }
+
+}
+
+if { $bCheckIPsPassed != 1 } {
+  common::send_msg_id "BD_TCL-1003" "WARNING" "Will not continue with creation of design due to the error(s) above."
+  return 3
+}
+
+##################################################################
+# DESIGN PROCs
+##################################################################
+
+
+
+# Procedure to create entire design; Provide argument to make
+# procedure reusable. If parentCell is "", will use root.
+proc create_root_design { parentCell } {
+
+  variable script_folder
+  variable design_name
+
+  if { $parentCell eq "" } {
+     set parentCell [get_bd_cells /]
+  }
+
+  # Get object for parentCell
+  set parentObj [get_bd_cells $parentCell]
+  if { $parentObj == "" } {
+     catch {common::send_msg_id "BD_TCL-100" "ERROR" "Unable to find parent cell <$parentCell>!"}
+     return
+  }
+
+  # Make sure parentObj is hier blk
+  set parentType [get_property TYPE $parentObj]
+  if { $parentType ne "hier" } {
+     catch {common::send_msg_id "BD_TCL-101" "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
+     return
+  }
+
+  # Save current instance; Restore later
+  set oldCurInst [current_bd_instance .]
+
+  # Set parent object as current
+  current_bd_instance $parentObj
+
+
+  # Create interface ports
+  set DDR [ create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 DDR ]
+  set FIXED_IO [ create_bd_intf_port -mode Master -vlnv xilinx.com:display_processing_system7:fixedio_rtl:1.0 FIXED_IO ]
+
+  # Create ports
+  set FCLK_CLK0 [ create_bd_port -dir O -type clk FCLK_CLK0 ]
+  set FCLK_RESET0_N [ create_bd_port -dir O -type rst FCLK_RESET0_N ]
+  set ext_reset_n [ create_bd_port -dir I -type rst ext_reset_n ]
+  set_property -dict [ list \
+   CONFIG.POLARITY {ACTIVE_LOW} \
+ ] $ext_reset_n
+
+  # Create instance: axi_bram_ctrl, and set properties
+  set axi_bram_ctrl [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_bram_ctrl:4.* axi_bram_ctrl ]
+
+  # Create instance: axi_bram_ctrl_bram, and set properties
+  set axi_bram_ctrl_bram [ create_bd_cell -type ip -vlnv xilinx.com:ip:blk_mem_gen:8.* axi_bram_ctrl_bram ]
+  set_property -dict [ list \
+   CONFIG.Memory_Type {True_Dual_Port_RAM} \
+ ] $axi_bram_ctrl_bram
+
+  # Create instance: axi_smc, and set properties
+  set axi_smc [ create_bd_cell -type ip -vlnv xilinx.com:ip:smartconnect:1.* axi_smc ]
+  set_property -dict [ list \
+   CONFIG.NUM_SI {1} \
+ ] $axi_smc
+
+  # Create instance: processing_system7_0, and set properties
+  set processing_system7_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:processing_system7:5.* processing_system7_0 ]
+  set_property -dict [ list \
+   CONFIG.PCW_ACT_APU_PERIPHERAL_FREQMHZ {666.666687} \
+   CONFIG.PCW_ACT_CAN0_PERIPHERAL_FREQMHZ {23.8095} \
+   CONFIG.PCW_ACT_CAN1_PERIPHERAL_FREQMHZ {23.8095} \
+   CONFIG.PCW_ACT_CAN_PERIPHERAL_FREQMHZ {10.000000} \
+   CONFIG.PCW_ACT_DCI_PERIPHERAL_FREQMHZ {10.158730} \
+   CONFIG.PCW_ACT_ENET0_PERIPHERAL_FREQMHZ {10.000000} \
+   CONFIG.PCW_ACT_ENET1_PERIPHERAL_FREQMHZ {10.000000} \
+   CONFIG.PCW_ACT_FPGA0_PERIPHERAL_FREQMHZ {100.000000} \
+   CONFIG.PCW_ACT_FPGA1_PERIPHERAL_FREQMHZ {10.000000} \
+   CONFIG.PCW_ACT_FPGA2_PERIPHERAL_FREQMHZ {10.000000} \
+   CONFIG.PCW_ACT_FPGA3_PERIPHERAL_FREQMHZ {10.000000} \
+   CONFIG.PCW_ACT_I2C_PERIPHERAL_FREQMHZ {50} \
+   CONFIG.PCW_ACT_PCAP_PERIPHERAL_FREQMHZ {200.000000} \
+   CONFIG.PCW_ACT_QSPI_PERIPHERAL_FREQMHZ {200.000000} \
+   CONFIG.PCW_ACT_SDIO_PERIPHERAL_FREQMHZ {20.000000} \
+   CONFIG.PCW_ACT_SMC_PERIPHERAL_FREQMHZ {10.000000} \
+   CONFIG.PCW_ACT_SPI_PERIPHERAL_FREQMHZ {10.000000} \
+   CONFIG.PCW_ACT_TPIU_PERIPHERAL_FREQMHZ {200.000000} \
+   CONFIG.PCW_ACT_TTC0_CLK0_PERIPHERAL_FREQMHZ {111.111115} \
+   CONFIG.PCW_ACT_TTC0_CLK1_PERIPHERAL_FREQMHZ {111.111115} \
+   CONFIG.PCW_ACT_TTC0_CLK2_PERIPHERAL_FREQMHZ {111.111115} \
+   CONFIG.PCW_ACT_TTC1_CLK0_PERIPHERAL_FREQMHZ {111.111115} \
+   CONFIG.PCW_ACT_TTC1_CLK1_PERIPHERAL_FREQMHZ {111.111115} \
+   CONFIG.PCW_ACT_TTC1_CLK2_PERIPHERAL_FREQMHZ {111.111115} \
+   CONFIG.PCW_ACT_TTC_PERIPHERAL_FREQMHZ {50} \
+   CONFIG.PCW_ACT_UART_PERIPHERAL_FREQMHZ {100.000000} \
+   CONFIG.PCW_ACT_USB0_PERIPHERAL_FREQMHZ {60} \
+   CONFIG.PCW_ACT_USB1_PERIPHERAL_FREQMHZ {60} \
+   CONFIG.PCW_ACT_WDT_PERIPHERAL_FREQMHZ {111.111115} \
+   CONFIG.PCW_APU_CLK_RATIO_ENABLE {6:2:1} \
+   CONFIG.PCW_APU_PERIPHERAL_FREQMHZ {666.666666} \
+   CONFIG.PCW_ARMPLL_CTRL_FBDIV {40} \
+   CONFIG.PCW_CAN0_BASEADDR {0xE0008000} \
+   CONFIG.PCW_CAN0_GRP_CLK_ENABLE {0} \
+   CONFIG.PCW_CAN0_HIGHADDR {0xE0008FFF} \
+   CONFIG.PCW_CAN0_PERIPHERAL_CLKSRC {External} \
+   CONFIG.PCW_CAN0_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_CAN0_PERIPHERAL_FREQMHZ {-1} \
+   CONFIG.PCW_CAN1_BASEADDR {0xE0009000} \
+   CONFIG.PCW_CAN1_GRP_CLK_ENABLE {0} \
+   CONFIG.PCW_CAN1_HIGHADDR {0xE0009FFF} \
+   CONFIG.PCW_CAN1_PERIPHERAL_CLKSRC {External} \
+   CONFIG.PCW_CAN1_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_CAN1_PERIPHERAL_FREQMHZ {-1} \
+   CONFIG.PCW_CAN_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_CAN_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_CAN_PERIPHERAL_DIVISOR1 {1} \
+   CONFIG.PCW_CAN_PERIPHERAL_FREQMHZ {100} \
+   CONFIG.PCW_CAN_PERIPHERAL_VALID {0} \
+   CONFIG.PCW_CLK0_FREQ {100000000} \
+   CONFIG.PCW_CLK1_FREQ {10000000} \
+   CONFIG.PCW_CLK2_FREQ {10000000} \
+   CONFIG.PCW_CLK3_FREQ {10000000} \
+   CONFIG.PCW_CORE0_FIQ_INTR {0} \
+   CONFIG.PCW_CORE0_IRQ_INTR {0} \
+   CONFIG.PCW_CORE1_FIQ_INTR {0} \
+   CONFIG.PCW_CORE1_IRQ_INTR {0} \
+   CONFIG.PCW_CPU_CPU_6X4X_MAX_RANGE {667} \
+   CONFIG.PCW_CPU_CPU_PLL_FREQMHZ {1333.333} \
+   CONFIG.PCW_CPU_PERIPHERAL_CLKSRC {ARM PLL} \
+   CONFIG.PCW_CPU_PERIPHERAL_DIVISOR0 {2} \
+   CONFIG.PCW_CRYSTAL_PERIPHERAL_FREQMHZ {33.333333} \
+   CONFIG.PCW_DCI_PERIPHERAL_CLKSRC {DDR PLL} \
+   CONFIG.PCW_DCI_PERIPHERAL_DIVISOR0 {15} \
+   CONFIG.PCW_DCI_PERIPHERAL_DIVISOR1 {7} \
+   CONFIG.PCW_DCI_PERIPHERAL_FREQMHZ {10.159} \
+   CONFIG.PCW_DDRPLL_CTRL_FBDIV {32} \
+   CONFIG.PCW_DDR_DDR_PLL_FREQMHZ {1066.667} \
+   CONFIG.PCW_DDR_HPRLPR_QUEUE_PARTITION {HPR(0)/LPR(32)} \
+   CONFIG.PCW_DDR_HPR_TO_CRITICAL_PRIORITY_LEVEL {15} \
+   CONFIG.PCW_DDR_LPR_TO_CRITICAL_PRIORITY_LEVEL {2} \
+   CONFIG.PCW_DDR_PERIPHERAL_CLKSRC {DDR PLL} \
+   CONFIG.PCW_DDR_PERIPHERAL_DIVISOR0 {2} \
+   CONFIG.PCW_DDR_PORT0_HPR_ENABLE {0} \
+   CONFIG.PCW_DDR_PORT1_HPR_ENABLE {0} \
+   CONFIG.PCW_DDR_PORT2_HPR_ENABLE {0} \
+   CONFIG.PCW_DDR_PORT3_HPR_ENABLE {0} \
+   CONFIG.PCW_DDR_RAM_BASEADDR {0x00100000} \
+   CONFIG.PCW_DDR_RAM_HIGHADDR {0x3FFFFFFF} \
+   CONFIG.PCW_DDR_WRITE_TO_CRITICAL_PRIORITY_LEVEL {2} \
+   CONFIG.PCW_DM_WIDTH {4} \
+   CONFIG.PCW_DQS_WIDTH {4} \
+   CONFIG.PCW_DQ_WIDTH {32} \
+   CONFIG.PCW_ENET0_BASEADDR {0xE000B000} \
+   CONFIG.PCW_ENET0_GRP_MDIO_ENABLE {0} \
+   CONFIG.PCW_ENET0_HIGHADDR {0xE000BFFF} \
+   CONFIG.PCW_ENET0_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_ENET0_PERIPHERAL_DIVISOR1 {1} \
+   CONFIG.PCW_ENET0_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_ENET0_PERIPHERAL_FREQMHZ {1000 Mbps} \
+   CONFIG.PCW_ENET0_RESET_ENABLE {0} \
+   CONFIG.PCW_ENET1_BASEADDR {0xE000C000} \
+   CONFIG.PCW_ENET1_GRP_MDIO_ENABLE {0} \
+   CONFIG.PCW_ENET1_HIGHADDR {0xE000CFFF} \
+   CONFIG.PCW_ENET1_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_ENET1_PERIPHERAL_DIVISOR1 {1} \
+   CONFIG.PCW_ENET1_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_ENET1_PERIPHERAL_FREQMHZ {1000 Mbps} \
+   CONFIG.PCW_ENET1_RESET_ENABLE {0} \
+   CONFIG.PCW_ENET_RESET_ENABLE {0} \
+   CONFIG.PCW_ENET_RESET_POLARITY {Active Low} \
+   CONFIG.PCW_EN_4K_TIMER {0} \
+   CONFIG.PCW_EN_CAN0 {0} \
+   CONFIG.PCW_EN_CAN1 {0} \
+   CONFIG.PCW_EN_CLK0_PORT {1} \
+   CONFIG.PCW_EN_CLK1_PORT {0} \
+   CONFIG.PCW_EN_CLK2_PORT {0} \
+   CONFIG.PCW_EN_CLK3_PORT {0} \
+   CONFIG.PCW_EN_CLKTRIG0_PORT {0} \
+   CONFIG.PCW_EN_CLKTRIG1_PORT {0} \
+   CONFIG.PCW_EN_CLKTRIG2_PORT {0} \
+   CONFIG.PCW_EN_CLKTRIG3_PORT {0} \
+   CONFIG.PCW_EN_DDR {1} \
+   CONFIG.PCW_EN_EMIO_CAN0 {0} \
+   CONFIG.PCW_EN_EMIO_CAN1 {0} \
+   CONFIG.PCW_EN_EMIO_CD_SDIO0 {0} \
+   CONFIG.PCW_EN_EMIO_CD_SDIO1 {0} \
+   CONFIG.PCW_EN_EMIO_ENET0 {0} \
+   CONFIG.PCW_EN_EMIO_ENET1 {0} \
+   CONFIG.PCW_EN_EMIO_GPIO {0} \
+   CONFIG.PCW_EN_EMIO_I2C0 {0} \
+   CONFIG.PCW_EN_EMIO_I2C1 {0} \
+   CONFIG.PCW_EN_EMIO_MODEM_UART0 {0} \
+   CONFIG.PCW_EN_EMIO_MODEM_UART1 {0} \
+   CONFIG.PCW_EN_EMIO_PJTAG {0} \
+   CONFIG.PCW_EN_EMIO_SDIO0 {0} \
+   CONFIG.PCW_EN_EMIO_SDIO1 {0} \
+   CONFIG.PCW_EN_EMIO_SPI0 {0} \
+   CONFIG.PCW_EN_EMIO_SPI1 {0} \
+   CONFIG.PCW_EN_EMIO_SRAM_INT {0} \
+   CONFIG.PCW_EN_EMIO_TRACE {0} \
+   CONFIG.PCW_EN_EMIO_TTC0 {0} \
+   CONFIG.PCW_EN_EMIO_TTC1 {0} \
+   CONFIG.PCW_EN_EMIO_UART0 {0} \
+   CONFIG.PCW_EN_EMIO_UART1 {0} \
+   CONFIG.PCW_EN_EMIO_WDT {0} \
+   CONFIG.PCW_EN_EMIO_WP_SDIO0 {0} \
+   CONFIG.PCW_EN_EMIO_WP_SDIO1 {0} \
+   CONFIG.PCW_EN_ENET0 {0} \
+   CONFIG.PCW_EN_ENET1 {0} \
+   CONFIG.PCW_EN_GPIO {0} \
+   CONFIG.PCW_EN_I2C0 {0} \
+   CONFIG.PCW_EN_I2C1 {0} \
+   CONFIG.PCW_EN_MODEM_UART0 {0} \
+   CONFIG.PCW_EN_MODEM_UART1 {0} \
+   CONFIG.PCW_EN_PJTAG {0} \
+   CONFIG.PCW_EN_PTP_ENET0 {0} \
+   CONFIG.PCW_EN_PTP_ENET1 {0} \
+   CONFIG.PCW_EN_QSPI {1} \
+   CONFIG.PCW_EN_RST0_PORT {1} \
+   CONFIG.PCW_EN_RST1_PORT {0} \
+   CONFIG.PCW_EN_RST2_PORT {0} \
+   CONFIG.PCW_EN_RST3_PORT {0} \
+   CONFIG.PCW_EN_SDIO0 {1} \
+   CONFIG.PCW_EN_SDIO1 {0} \
+   CONFIG.PCW_EN_SMC {0} \
+   CONFIG.PCW_EN_SPI0 {0} \
+   CONFIG.PCW_EN_SPI1 {0} \
+   CONFIG.PCW_EN_TRACE {0} \
+   CONFIG.PCW_EN_TTC0 {0} \
+   CONFIG.PCW_EN_TTC1 {0} \
+   CONFIG.PCW_EN_UART0 {1} \
+   CONFIG.PCW_EN_UART1 {0} \
+   CONFIG.PCW_EN_USB0 {0} \
+   CONFIG.PCW_EN_USB1 {0} \
+   CONFIG.PCW_EN_WDT {0} \
+   CONFIG.PCW_FCLK0_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR0 {4} \
+   CONFIG.PCW_FCLK0_PERIPHERAL_DIVISOR1 {3} \
+   CONFIG.PCW_FCLK1_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_FCLK1_PERIPHERAL_DIVISOR1 {1} \
+   CONFIG.PCW_FCLK2_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_FCLK2_PERIPHERAL_DIVISOR1 {1} \
+   CONFIG.PCW_FCLK3_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_FCLK3_PERIPHERAL_DIVISOR1 {1} \
+   CONFIG.PCW_FCLK_CLK0_BUF {TRUE} \
+   CONFIG.PCW_FCLK_CLK1_BUF {FALSE} \
+   CONFIG.PCW_FCLK_CLK2_BUF {FALSE} \
+   CONFIG.PCW_FCLK_CLK3_BUF {FALSE} \
+   CONFIG.PCW_FPGA0_PERIPHERAL_FREQMHZ {100} \
+   CONFIG.PCW_FPGA1_PERIPHERAL_FREQMHZ {50} \
+   CONFIG.PCW_FPGA2_PERIPHERAL_FREQMHZ {50} \
+   CONFIG.PCW_FPGA3_PERIPHERAL_FREQMHZ {50} \
+   CONFIG.PCW_FPGA_FCLK0_ENABLE {1} \
+   CONFIG.PCW_FPGA_FCLK1_ENABLE {0} \
+   CONFIG.PCW_FPGA_FCLK2_ENABLE {0} \
+   CONFIG.PCW_FPGA_FCLK3_ENABLE {0} \
+   CONFIG.PCW_GP0_EN_MODIFIABLE_TXN {1} \
+   CONFIG.PCW_GP0_NUM_READ_THREADS {4} \
+   CONFIG.PCW_GP0_NUM_WRITE_THREADS {4} \
+   CONFIG.PCW_GP1_EN_MODIFIABLE_TXN {1} \
+   CONFIG.PCW_GP1_NUM_READ_THREADS {4} \
+   CONFIG.PCW_GP1_NUM_WRITE_THREADS {4} \
+   CONFIG.PCW_GPIO_BASEADDR {0xE000A000} \
+   CONFIG.PCW_GPIO_EMIO_GPIO_ENABLE {0} \
+   CONFIG.PCW_GPIO_EMIO_GPIO_WIDTH {64} \
+   CONFIG.PCW_GPIO_HIGHADDR {0xE000AFFF} \
+   CONFIG.PCW_GPIO_MIO_GPIO_ENABLE {0} \
+   CONFIG.PCW_GPIO_MIO_GPIO_IO {<Select>} \
+   CONFIG.PCW_GPIO_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_I2C0_BASEADDR {0xE0004000} \
+   CONFIG.PCW_I2C0_GRP_INT_ENABLE {0} \
+   CONFIG.PCW_I2C0_HIGHADDR {0xE0004FFF} \
+   CONFIG.PCW_I2C0_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_I2C0_RESET_ENABLE {0} \
+   CONFIG.PCW_I2C1_BASEADDR {0xE0005000} \
+   CONFIG.PCW_I2C1_GRP_INT_ENABLE {0} \
+   CONFIG.PCW_I2C1_HIGHADDR {0xE0005FFF} \
+   CONFIG.PCW_I2C1_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_I2C1_RESET_ENABLE {0} \
+   CONFIG.PCW_I2C_PERIPHERAL_FREQMHZ {25} \
+   CONFIG.PCW_I2C_RESET_ENABLE {0} \
+   CONFIG.PCW_I2C_RESET_POLARITY {Active Low} \
+   CONFIG.PCW_IMPORT_BOARD_PRESET {None} \
+   CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK {0} \
+   CONFIG.PCW_INCLUDE_TRACE_BUFFER {0} \
+   CONFIG.PCW_IOPLL_CTRL_FBDIV {36} \
+   CONFIG.PCW_IO_IO_PLL_FREQMHZ {1200.000} \
+   CONFIG.PCW_IRQ_F2P_INTR {0} \
+   CONFIG.PCW_IRQ_F2P_MODE {DIRECT} \
+   CONFIG.PCW_MIO_14_DIRECTION {in} \
+   CONFIG.PCW_MIO_14_IOTYPE {LVCMOS 3.3V} \
+   CONFIG.PCW_MIO_14_PULLUP {enabled} \
+   CONFIG.PCW_MIO_14_SLEW {slow} \
+   CONFIG.PCW_MIO_15_DIRECTION {out} \
+   CONFIG.PCW_MIO_15_IOTYPE {LVCMOS 3.3V} \
+   CONFIG.PCW_MIO_15_PULLUP {enabled} \
+   CONFIG.PCW_MIO_15_SLEW {slow} \
+   CONFIG.PCW_MIO_1_DIRECTION {out} \
+   CONFIG.PCW_MIO_1_IOTYPE {LVCMOS 3.3V} \
+   CONFIG.PCW_MIO_1_PULLUP {enabled} \
+   CONFIG.PCW_MIO_1_SLEW {slow} \
+   CONFIG.PCW_MIO_2_DIRECTION {inout} \
+   CONFIG.PCW_MIO_2_IOTYPE {LVCMOS 3.3V} \
+   CONFIG.PCW_MIO_2_PULLUP {disabled} \
+   CONFIG.PCW_MIO_2_SLEW {slow} \
+   CONFIG.PCW_MIO_3_DIRECTION {inout} \
+   CONFIG.PCW_MIO_3_IOTYPE {LVCMOS 3.3V} \
+   CONFIG.PCW_MIO_3_PULLUP {disabled} \
+   CONFIG.PCW_MIO_3_SLEW {slow} \
+   CONFIG.PCW_MIO_40_DIRECTION {inout} \
+   CONFIG.PCW_MIO_40_IOTYPE {LVCMOS 1.8V} \
+   CONFIG.PCW_MIO_40_PULLUP {enabled} \
+   CONFIG.PCW_MIO_40_SLEW {slow} \
+   CONFIG.PCW_MIO_41_DIRECTION {inout} \
+   CONFIG.PCW_MIO_41_IOTYPE {LVCMOS 1.8V} \
+   CONFIG.PCW_MIO_41_PULLUP {enabled} \
+   CONFIG.PCW_MIO_41_SLEW {slow} \
+   CONFIG.PCW_MIO_42_DIRECTION {inout} \
+   CONFIG.PCW_MIO_42_IOTYPE {LVCMOS 1.8V} \
+   CONFIG.PCW_MIO_42_PULLUP {enabled} \
+   CONFIG.PCW_MIO_42_SLEW {slow} \
+   CONFIG.PCW_MIO_43_DIRECTION {inout} \
+   CONFIG.PCW_MIO_43_IOTYPE {LVCMOS 1.8V} \
+   CONFIG.PCW_MIO_43_PULLUP {enabled} \
+   CONFIG.PCW_MIO_43_SLEW {slow} \
+   CONFIG.PCW_MIO_44_DIRECTION {inout} \
+   CONFIG.PCW_MIO_44_IOTYPE {LVCMOS 1.8V} \
+   CONFIG.PCW_MIO_44_PULLUP {enabled} \
+   CONFIG.PCW_MIO_44_SLEW {slow} \
+   CONFIG.PCW_MIO_45_DIRECTION {inout} \
+   CONFIG.PCW_MIO_45_IOTYPE {LVCMOS 1.8V} \
+   CONFIG.PCW_MIO_45_PULLUP {enabled} \
+   CONFIG.PCW_MIO_45_SLEW {slow} \
+   CONFIG.PCW_MIO_47_DIRECTION {in} \
+   CONFIG.PCW_MIO_47_IOTYPE {LVCMOS 1.8V} \
+   CONFIG.PCW_MIO_47_PULLUP {enabled} \
+   CONFIG.PCW_MIO_47_SLEW {slow} \
+   CONFIG.PCW_MIO_4_DIRECTION {inout} \
+   CONFIG.PCW_MIO_4_IOTYPE {LVCMOS 3.3V} \
+   CONFIG.PCW_MIO_4_PULLUP {disabled} \
+   CONFIG.PCW_MIO_4_SLEW {slow} \
+   CONFIG.PCW_MIO_5_DIRECTION {inout} \
+   CONFIG.PCW_MIO_5_IOTYPE {LVCMOS 3.3V} \
+   CONFIG.PCW_MIO_5_PULLUP {disabled} \
+   CONFIG.PCW_MIO_5_SLEW {slow} \
+   CONFIG.PCW_MIO_6_DIRECTION {out} \
+   CONFIG.PCW_MIO_6_IOTYPE {LVCMOS 3.3V} \
+   CONFIG.PCW_MIO_6_PULLUP {disabled} \
+   CONFIG.PCW_MIO_6_SLEW {slow} \
+   CONFIG.PCW_MIO_PRIMITIVE {54} \
+   CONFIG.PCW_MIO_TREE_PERIPHERALS {unassigned#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#UART 0#UART 0#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#SD 0#SD 0#SD 0#SD 0#SD 0#SD 0#unassigned#SD 0#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned} \
+   CONFIG.PCW_MIO_TREE_SIGNALS {unassigned#qspi0_ss_b#qspi0_io[0]#qspi0_io[1]#qspi0_io[2]#qspi0_io[3]/HOLD_B#qspi0_sclk#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#rx#tx#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#clk#cmd#data[0]#data[1]#data[2]#data[3]#unassigned#cd#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned} \
+   CONFIG.PCW_M_AXI_GP0_ENABLE_STATIC_REMAP {0} \
+   CONFIG.PCW_M_AXI_GP0_ID_WIDTH {12} \
+   CONFIG.PCW_M_AXI_GP0_SUPPORT_NARROW_BURST {0} \
+   CONFIG.PCW_M_AXI_GP0_THREAD_ID_WIDTH {12} \
+   CONFIG.PCW_M_AXI_GP1_ENABLE_STATIC_REMAP {0} \
+   CONFIG.PCW_M_AXI_GP1_ID_WIDTH {12} \
+   CONFIG.PCW_M_AXI_GP1_SUPPORT_NARROW_BURST {0} \
+   CONFIG.PCW_M_AXI_GP1_THREAD_ID_WIDTH {12} \
+   CONFIG.PCW_NAND_CYCLES_T_AR {1} \
+   CONFIG.PCW_NAND_CYCLES_T_CLR {1} \
+   CONFIG.PCW_NAND_CYCLES_T_RC {11} \
+   CONFIG.PCW_NAND_CYCLES_T_REA {1} \
+   CONFIG.PCW_NAND_CYCLES_T_RR {1} \
+   CONFIG.PCW_NAND_CYCLES_T_WC {11} \
+   CONFIG.PCW_NAND_CYCLES_T_WP {1} \
+   CONFIG.PCW_NAND_GRP_D8_ENABLE {0} \
+   CONFIG.PCW_NAND_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_NOR_CS0_T_CEOE {1} \
+   CONFIG.PCW_NOR_CS0_T_PC {1} \
+   CONFIG.PCW_NOR_CS0_T_RC {11} \
+   CONFIG.PCW_NOR_CS0_T_TR {1} \
+   CONFIG.PCW_NOR_CS0_T_WC {11} \
+   CONFIG.PCW_NOR_CS0_T_WP {1} \
+   CONFIG.PCW_NOR_CS0_WE_TIME {0} \
+   CONFIG.PCW_NOR_CS1_T_CEOE {1} \
+   CONFIG.PCW_NOR_CS1_T_PC {1} \
+   CONFIG.PCW_NOR_CS1_T_RC {11} \
+   CONFIG.PCW_NOR_CS1_T_TR {1} \
+   CONFIG.PCW_NOR_CS1_T_WC {11} \
+   CONFIG.PCW_NOR_CS1_T_WP {1} \
+   CONFIG.PCW_NOR_CS1_WE_TIME {0} \
+   CONFIG.PCW_NOR_GRP_A25_ENABLE {0} \
+   CONFIG.PCW_NOR_GRP_CS0_ENABLE {0} \
+   CONFIG.PCW_NOR_GRP_CS1_ENABLE {0} \
+   CONFIG.PCW_NOR_GRP_SRAM_CS0_ENABLE {0} \
+   CONFIG.PCW_NOR_GRP_SRAM_CS1_ENABLE {0} \
+   CONFIG.PCW_NOR_GRP_SRAM_INT_ENABLE {0} \
+   CONFIG.PCW_NOR_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_NOR_SRAM_CS0_T_CEOE {1} \
+   CONFIG.PCW_NOR_SRAM_CS0_T_PC {1} \
+   CONFIG.PCW_NOR_SRAM_CS0_T_RC {11} \
+   CONFIG.PCW_NOR_SRAM_CS0_T_TR {1} \
+   CONFIG.PCW_NOR_SRAM_CS0_T_WC {11} \
+   CONFIG.PCW_NOR_SRAM_CS0_T_WP {1} \
+   CONFIG.PCW_NOR_SRAM_CS0_WE_TIME {0} \
+   CONFIG.PCW_NOR_SRAM_CS1_T_CEOE {1} \
+   CONFIG.PCW_NOR_SRAM_CS1_T_PC {1} \
+   CONFIG.PCW_NOR_SRAM_CS1_T_RC {11} \
+   CONFIG.PCW_NOR_SRAM_CS1_T_TR {1} \
+   CONFIG.PCW_NOR_SRAM_CS1_T_WC {11} \
+   CONFIG.PCW_NOR_SRAM_CS1_T_WP {1} \
+   CONFIG.PCW_NOR_SRAM_CS1_WE_TIME {0} \
+   CONFIG.PCW_OVERRIDE_BASIC_CLOCK {0} \
+   CONFIG.PCW_P2F_CAN0_INTR {0} \
+   CONFIG.PCW_P2F_CAN1_INTR {0} \
+   CONFIG.PCW_P2F_CTI_INTR {0} \
+   CONFIG.PCW_P2F_DMAC0_INTR {0} \
+   CONFIG.PCW_P2F_DMAC1_INTR {0} \
+   CONFIG.PCW_P2F_DMAC2_INTR {0} \
+   CONFIG.PCW_P2F_DMAC3_INTR {0} \
+   CONFIG.PCW_P2F_DMAC4_INTR {0} \
+   CONFIG.PCW_P2F_DMAC5_INTR {0} \
+   CONFIG.PCW_P2F_DMAC6_INTR {0} \
+   CONFIG.PCW_P2F_DMAC7_INTR {0} \
+   CONFIG.PCW_P2F_DMAC_ABORT_INTR {0} \
+   CONFIG.PCW_P2F_ENET0_INTR {0} \
+   CONFIG.PCW_P2F_ENET1_INTR {0} \
+   CONFIG.PCW_P2F_GPIO_INTR {0} \
+   CONFIG.PCW_P2F_I2C0_INTR {0} \
+   CONFIG.PCW_P2F_I2C1_INTR {0} \
+   CONFIG.PCW_P2F_QSPI_INTR {0} \
+   CONFIG.PCW_P2F_SDIO0_INTR {0} \
+   CONFIG.PCW_P2F_SDIO1_INTR {0} \
+   CONFIG.PCW_P2F_SMC_INTR {0} \
+   CONFIG.PCW_P2F_SPI0_INTR {0} \
+   CONFIG.PCW_P2F_SPI1_INTR {0} \
+   CONFIG.PCW_P2F_UART0_INTR {0} \
+   CONFIG.PCW_P2F_UART1_INTR {0} \
+   CONFIG.PCW_P2F_USB0_INTR {0} \
+   CONFIG.PCW_P2F_USB1_INTR {0} \
+   CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY0 {0.063} \
+   CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY1 {0.062} \
+   CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY2 {0.065} \
+   CONFIG.PCW_PACKAGE_DDR_BOARD_DELAY3 {0.083} \
+   CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_0 {-0.007} \
+   CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_1 {-0.010} \
+   CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_2 {-0.006} \
+   CONFIG.PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_3 {-0.048} \
+   CONFIG.PCW_PACKAGE_NAME {clg484} \
+   CONFIG.PCW_PCAP_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_PCAP_PERIPHERAL_DIVISOR0 {6} \
+   CONFIG.PCW_PCAP_PERIPHERAL_FREQMHZ {200} \
+   CONFIG.PCW_PERIPHERAL_BOARD_PRESET {part0} \
+   CONFIG.PCW_PJTAG_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_PLL_BYPASSMODE_ENABLE {0} \
+   CONFIG.PCW_PRESET_BANK0_VOLTAGE {LVCMOS 3.3V} \
+   CONFIG.PCW_PRESET_BANK1_VOLTAGE {LVCMOS 1.8V} \
+   CONFIG.PCW_PS7_SI_REV {PRODUCTION} \
+   CONFIG.PCW_QSPI_GRP_FBCLK_ENABLE {0} \
+   CONFIG.PCW_QSPI_GRP_IO1_ENABLE {0} \
+   CONFIG.PCW_QSPI_GRP_SINGLE_SS_ENABLE {1} \
+   CONFIG.PCW_QSPI_GRP_SINGLE_SS_IO {MIO 1 .. 6} \
+   CONFIG.PCW_QSPI_GRP_SS1_ENABLE {0} \
+   CONFIG.PCW_QSPI_INTERNAL_HIGHADDRESS {0xFCFFFFFF} \
+   CONFIG.PCW_QSPI_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_QSPI_PERIPHERAL_DIVISOR0 {6} \
+   CONFIG.PCW_QSPI_PERIPHERAL_ENABLE {1} \
+   CONFIG.PCW_QSPI_PERIPHERAL_FREQMHZ {200} \
+   CONFIG.PCW_QSPI_QSPI_IO {MIO 1 .. 6} \
+   CONFIG.PCW_SD0_GRP_CD_ENABLE {1} \
+   CONFIG.PCW_SD0_GRP_CD_IO {MIO 47} \
+   CONFIG.PCW_SD0_GRP_POW_ENABLE {0} \
+   CONFIG.PCW_SD0_GRP_WP_ENABLE {0} \
+   CONFIG.PCW_SD0_PERIPHERAL_ENABLE {1} \
+   CONFIG.PCW_SD0_SD0_IO {MIO 40 .. 45} \
+   CONFIG.PCW_SD1_GRP_CD_ENABLE {0} \
+   CONFIG.PCW_SD1_GRP_POW_ENABLE {0} \
+   CONFIG.PCW_SD1_GRP_WP_ENABLE {0} \
+   CONFIG.PCW_SD1_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_SDIO0_BASEADDR {0xE0100000} \
+   CONFIG.PCW_SDIO0_HIGHADDR {0xE0100FFF} \
+   CONFIG.PCW_SDIO1_BASEADDR {0xE0101000} \
+   CONFIG.PCW_SDIO1_HIGHADDR {0xE0101FFF} \
+   CONFIG.PCW_SDIO_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_SDIO_PERIPHERAL_DIVISOR0 {60} \
+   CONFIG.PCW_SDIO_PERIPHERAL_FREQMHZ {20} \
+   CONFIG.PCW_SDIO_PERIPHERAL_VALID {1} \
+   CONFIG.PCW_SINGLE_QSPI_DATA_MODE {x4} \
+   CONFIG.PCW_SMC_CYCLE_T0 {NA} \
+   CONFIG.PCW_SMC_CYCLE_T1 {NA} \
+   CONFIG.PCW_SMC_CYCLE_T2 {NA} \
+   CONFIG.PCW_SMC_CYCLE_T3 {NA} \
+   CONFIG.PCW_SMC_CYCLE_T4 {NA} \
+   CONFIG.PCW_SMC_CYCLE_T5 {NA} \
+   CONFIG.PCW_SMC_CYCLE_T6 {NA} \
+   CONFIG.PCW_SMC_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_SMC_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_SMC_PERIPHERAL_FREQMHZ {100} \
+   CONFIG.PCW_SMC_PERIPHERAL_VALID {0} \
+   CONFIG.PCW_SPI0_BASEADDR {0xE0006000} \
+   CONFIG.PCW_SPI0_GRP_SS0_ENABLE {0} \
+   CONFIG.PCW_SPI0_GRP_SS1_ENABLE {0} \
+   CONFIG.PCW_SPI0_GRP_SS2_ENABLE {0} \
+   CONFIG.PCW_SPI0_HIGHADDR {0xE0006FFF} \
+   CONFIG.PCW_SPI0_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_SPI1_BASEADDR {0xE0007000} \
+   CONFIG.PCW_SPI1_GRP_SS0_ENABLE {0} \
+   CONFIG.PCW_SPI1_GRP_SS1_ENABLE {0} \
+   CONFIG.PCW_SPI1_GRP_SS2_ENABLE {0} \
+   CONFIG.PCW_SPI1_HIGHADDR {0xE0007FFF} \
+   CONFIG.PCW_SPI1_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_SPI_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_SPI_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_SPI_PERIPHERAL_FREQMHZ {166.666666} \
+   CONFIG.PCW_SPI_PERIPHERAL_VALID {0} \
+   CONFIG.PCW_S_AXI_ACP_ARUSER_VAL {31} \
+   CONFIG.PCW_S_AXI_ACP_AWUSER_VAL {31} \
+   CONFIG.PCW_S_AXI_ACP_ID_WIDTH {3} \
+   CONFIG.PCW_S_AXI_GP0_ID_WIDTH {6} \
+   CONFIG.PCW_S_AXI_GP1_ID_WIDTH {6} \
+   CONFIG.PCW_S_AXI_HP0_DATA_WIDTH {64} \
+   CONFIG.PCW_S_AXI_HP0_ID_WIDTH {6} \
+   CONFIG.PCW_S_AXI_HP1_DATA_WIDTH {64} \
+   CONFIG.PCW_S_AXI_HP1_ID_WIDTH {6} \
+   CONFIG.PCW_S_AXI_HP2_DATA_WIDTH {64} \
+   CONFIG.PCW_S_AXI_HP2_ID_WIDTH {6} \
+   CONFIG.PCW_S_AXI_HP3_DATA_WIDTH {64} \
+   CONFIG.PCW_S_AXI_HP3_ID_WIDTH {6} \
+   CONFIG.PCW_TPIU_PERIPHERAL_CLKSRC {External} \
+   CONFIG.PCW_TPIU_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_TPIU_PERIPHERAL_FREQMHZ {200} \
+   CONFIG.PCW_TRACE_BUFFER_CLOCK_DELAY {12} \
+   CONFIG.PCW_TRACE_BUFFER_FIFO_SIZE {128} \
+   CONFIG.PCW_TRACE_GRP_16BIT_ENABLE {0} \
+   CONFIG.PCW_TRACE_GRP_2BIT_ENABLE {0} \
+   CONFIG.PCW_TRACE_GRP_32BIT_ENABLE {0} \
+   CONFIG.PCW_TRACE_GRP_4BIT_ENABLE {0} \
+   CONFIG.PCW_TRACE_GRP_8BIT_ENABLE {0} \
+   CONFIG.PCW_TRACE_INTERNAL_WIDTH {2} \
+   CONFIG.PCW_TRACE_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_TRACE_PIPELINE_WIDTH {8} \
+   CONFIG.PCW_TTC0_BASEADDR {0xE0104000} \
+   CONFIG.PCW_TTC0_CLK0_PERIPHERAL_CLKSRC {CPU_1X} \
+   CONFIG.PCW_TTC0_CLK0_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_TTC0_CLK0_PERIPHERAL_FREQMHZ {133.333333} \
+   CONFIG.PCW_TTC0_CLK1_PERIPHERAL_CLKSRC {CPU_1X} \
+   CONFIG.PCW_TTC0_CLK1_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_TTC0_CLK1_PERIPHERAL_FREQMHZ {133.333333} \
+   CONFIG.PCW_TTC0_CLK2_PERIPHERAL_CLKSRC {CPU_1X} \
+   CONFIG.PCW_TTC0_CLK2_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_TTC0_CLK2_PERIPHERAL_FREQMHZ {133.333333} \
+   CONFIG.PCW_TTC0_HIGHADDR {0xE0104fff} \
+   CONFIG.PCW_TTC0_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_TTC1_BASEADDR {0xE0105000} \
+   CONFIG.PCW_TTC1_CLK0_PERIPHERAL_CLKSRC {CPU_1X} \
+   CONFIG.PCW_TTC1_CLK0_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_TTC1_CLK0_PERIPHERAL_FREQMHZ {133.333333} \
+   CONFIG.PCW_TTC1_CLK1_PERIPHERAL_CLKSRC {CPU_1X} \
+   CONFIG.PCW_TTC1_CLK1_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_TTC1_CLK1_PERIPHERAL_FREQMHZ {133.333333} \
+   CONFIG.PCW_TTC1_CLK2_PERIPHERAL_CLKSRC {CPU_1X} \
+   CONFIG.PCW_TTC1_CLK2_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_TTC1_CLK2_PERIPHERAL_FREQMHZ {133.333333} \
+   CONFIG.PCW_TTC1_HIGHADDR {0xE0105fff} \
+   CONFIG.PCW_TTC1_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_TTC_PERIPHERAL_FREQMHZ {50} \
+   CONFIG.PCW_UART0_BASEADDR {0xE0000000} \
+   CONFIG.PCW_UART0_BAUD_RATE {115200} \
+   CONFIG.PCW_UART0_GRP_FULL_ENABLE {0} \
+   CONFIG.PCW_UART0_HIGHADDR {0xE0000FFF} \
+   CONFIG.PCW_UART0_PERIPHERAL_ENABLE {1} \
+   CONFIG.PCW_UART0_UART0_IO {MIO 14 .. 15} \
+   CONFIG.PCW_UART1_BASEADDR {0xE0001000} \
+   CONFIG.PCW_UART1_BAUD_RATE {115200} \
+   CONFIG.PCW_UART1_GRP_FULL_ENABLE {0} \
+   CONFIG.PCW_UART1_HIGHADDR {0xE0001FFF} \
+   CONFIG.PCW_UART1_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_UART_PERIPHERAL_CLKSRC {IO PLL} \
+   CONFIG.PCW_UART_PERIPHERAL_DIVISOR0 {12} \
+   CONFIG.PCW_UART_PERIPHERAL_FREQMHZ {100} \
+   CONFIG.PCW_UART_PERIPHERAL_VALID {1} \
+   CONFIG.PCW_UIPARAM_ACT_DDR_FREQ_MHZ {533.333374} \
+   CONFIG.PCW_UIPARAM_DDR_ADV_ENABLE {0} \
+   CONFIG.PCW_UIPARAM_DDR_AL {0} \
+   CONFIG.PCW_UIPARAM_DDR_BANK_ADDR_COUNT {3} \
+   CONFIG.PCW_UIPARAM_DDR_BL {8} \
+   CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY0 {0.25} \
+   CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY1 {0.25} \
+   CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY2 {0.25} \
+   CONFIG.PCW_UIPARAM_DDR_BOARD_DELAY3 {0.25} \
+   CONFIG.PCW_UIPARAM_DDR_BUS_WIDTH {32 Bit} \
+   CONFIG.PCW_UIPARAM_DDR_CL {7} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_0_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_0_PACKAGE_LENGTH {61.0905} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_0_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_1_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_1_PACKAGE_LENGTH {61.0905} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_1_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_2_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_2_PACKAGE_LENGTH {61.0905} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_2_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_3_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_3_PACKAGE_LENGTH {61.0905} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_3_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_CLOCK_STOP_EN {0} \
+   CONFIG.PCW_UIPARAM_DDR_COL_ADDR_COUNT {10} \
+   CONFIG.PCW_UIPARAM_DDR_CWL {6} \
+   CONFIG.PCW_UIPARAM_DDR_DEVICE_CAPACITY {4096 MBits} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_0_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_0_PACKAGE_LENGTH {68.4725} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_0_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_1_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_1_PACKAGE_LENGTH {71.086} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_1_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_2_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_2_PACKAGE_LENGTH {66.794} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_2_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_3_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_3_PACKAGE_LENGTH {108.7385} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_3_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_0 {0.0} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_1 {0.0} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_2 {0.0} \
+   CONFIG.PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_3 {0.0} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_0_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_0_PACKAGE_LENGTH {64.1705} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_0_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_1_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_1_PACKAGE_LENGTH {63.686} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_1_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_2_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_2_PACKAGE_LENGTH {68.46} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_2_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_3_LENGTH_MM {0} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_3_PACKAGE_LENGTH {105.4895} \
+   CONFIG.PCW_UIPARAM_DDR_DQ_3_PROPOGATION_DELAY {160} \
+   CONFIG.PCW_UIPARAM_DDR_DRAM_WIDTH {16 Bits} \
+   CONFIG.PCW_UIPARAM_DDR_ECC {Disabled} \
+   CONFIG.PCW_UIPARAM_DDR_ENABLE {1} \
+   CONFIG.PCW_UIPARAM_DDR_FREQ_MHZ {533.333} \
+   CONFIG.PCW_UIPARAM_DDR_HIGH_TEMP {Normal (0-85)} \
+   CONFIG.PCW_UIPARAM_DDR_MEMORY_TYPE {DDR 3 (Low Voltage)} \
+   CONFIG.PCW_UIPARAM_DDR_PARTNO {MT41J256M16 RE-125} \
+   CONFIG.PCW_UIPARAM_DDR_ROW_ADDR_COUNT {15} \
+   CONFIG.PCW_UIPARAM_DDR_SPEED_BIN {DDR3_1066F} \
+   CONFIG.PCW_UIPARAM_DDR_TRAIN_DATA_EYE {0} \
+   CONFIG.PCW_UIPARAM_DDR_TRAIN_READ_GATE {0} \
+   CONFIG.PCW_UIPARAM_DDR_TRAIN_WRITE_LEVEL {0} \
+   CONFIG.PCW_UIPARAM_DDR_T_FAW {40.0} \
+   CONFIG.PCW_UIPARAM_DDR_T_RAS_MIN {35.0} \
+   CONFIG.PCW_UIPARAM_DDR_T_RC {48.91} \
+   CONFIG.PCW_UIPARAM_DDR_T_RCD {7} \
+   CONFIG.PCW_UIPARAM_DDR_T_RP {7} \
+   CONFIG.PCW_UIPARAM_DDR_USE_INTERNAL_VREF {0} \
+   CONFIG.PCW_UIPARAM_GENERATE_SUMMARY {NA} \
+   CONFIG.PCW_USB0_BASEADDR {0xE0102000} \
+   CONFIG.PCW_USB0_HIGHADDR {0xE0102fff} \
+   CONFIG.PCW_USB0_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_USB0_PERIPHERAL_FREQMHZ {60} \
+   CONFIG.PCW_USB0_RESET_ENABLE {0} \
+   CONFIG.PCW_USB1_BASEADDR {0xE0103000} \
+   CONFIG.PCW_USB1_HIGHADDR {0xE0103fff} \
+   CONFIG.PCW_USB1_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_USB1_PERIPHERAL_FREQMHZ {60} \
+   CONFIG.PCW_USB1_RESET_ENABLE {0} \
+   CONFIG.PCW_USB_RESET_ENABLE {0} \
+   CONFIG.PCW_USB_RESET_POLARITY {Active Low} \
+   CONFIG.PCW_USE_AXI_FABRIC_IDLE {0} \
+   CONFIG.PCW_USE_AXI_NONSECURE {0} \
+   CONFIG.PCW_USE_CORESIGHT {0} \
+   CONFIG.PCW_USE_CROSS_TRIGGER {0} \
+   CONFIG.PCW_USE_CR_FABRIC {1} \
+   CONFIG.PCW_USE_DDR_BYPASS {0} \
+   CONFIG.PCW_USE_DEBUG {0} \
+   CONFIG.PCW_USE_DEFAULT_ACP_USER_VAL {0} \
+   CONFIG.PCW_USE_DMA0 {0} \
+   CONFIG.PCW_USE_DMA1 {0} \
+   CONFIG.PCW_USE_DMA2 {0} \
+   CONFIG.PCW_USE_DMA3 {0} \
+   CONFIG.PCW_USE_EXPANDED_IOP {0} \
+   CONFIG.PCW_USE_EXPANDED_PS_SLCR_REGISTERS {0} \
+   CONFIG.PCW_USE_FABRIC_INTERRUPT {0} \
+   CONFIG.PCW_USE_HIGH_OCM {0} \
+   CONFIG.PCW_USE_M_AXI_GP0 {1} \
+   CONFIG.PCW_USE_M_AXI_GP1 {0} \
+   CONFIG.PCW_USE_PROC_EVENT_BUS {0} \
+   CONFIG.PCW_USE_PS_SLCR_REGISTERS {0} \
+   CONFIG.PCW_USE_S_AXI_ACP {0} \
+   CONFIG.PCW_USE_S_AXI_GP0 {0} \
+   CONFIG.PCW_USE_S_AXI_GP1 {0} \
+   CONFIG.PCW_USE_S_AXI_HP0 {0} \
+   CONFIG.PCW_USE_S_AXI_HP1 {0} \
+   CONFIG.PCW_USE_S_AXI_HP2 {0} \
+   CONFIG.PCW_USE_S_AXI_HP3 {0} \
+   CONFIG.PCW_USE_TRACE {0} \
+   CONFIG.PCW_USE_TRACE_DATA_EDGE_DETECTOR {0} \
+   CONFIG.PCW_VALUE_SILVERSION {3} \
+   CONFIG.PCW_WDT_PERIPHERAL_CLKSRC {CPU_1X} \
+   CONFIG.PCW_WDT_PERIPHERAL_DIVISOR0 {1} \
+   CONFIG.PCW_WDT_PERIPHERAL_ENABLE {0} \
+   CONFIG.PCW_WDT_PERIPHERAL_FREQMHZ {133.333333} \
+ ] $processing_system7_0
+
+  # Create instance: rst_ps7_0_100M, and set properties
+  set rst_ps7_0_100M [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.* rst_ps7_0_100M ]
+
+  # Create interface connections
+  connect_bd_intf_net -intf_net axi_bram_ctrl_BRAM_PORTA [get_bd_intf_pins axi_bram_ctrl/BRAM_PORTA] [get_bd_intf_pins axi_bram_ctrl_bram/BRAM_PORTA]
+  connect_bd_intf_net -intf_net axi_bram_ctrl_BRAM_PORTB [get_bd_intf_pins axi_bram_ctrl/BRAM_PORTB] [get_bd_intf_pins axi_bram_ctrl_bram/BRAM_PORTB]
+  connect_bd_intf_net -intf_net axi_smc_M00_AXI [get_bd_intf_pins axi_bram_ctrl/S_AXI] [get_bd_intf_pins axi_smc/M00_AXI]
+  connect_bd_intf_net -intf_net processing_system7_0_DDR [get_bd_intf_ports DDR] [get_bd_intf_pins processing_system7_0/DDR]
+  connect_bd_intf_net -intf_net processing_system7_0_FIXED_IO [get_bd_intf_ports FIXED_IO] [get_bd_intf_pins processing_system7_0/FIXED_IO]
+  connect_bd_intf_net -intf_net processing_system7_0_M_AXI_GP0 [get_bd_intf_pins axi_smc/S00_AXI] [get_bd_intf_pins processing_system7_0/M_AXI_GP0]
+
+  # Create port connections
+  connect_bd_net -net aux_reset_in_0_1 [get_bd_ports ext_reset_n] [get_bd_pins rst_ps7_0_100M/aux_reset_in]
+  connect_bd_net -net processing_system7_0_FCLK_CLK0 [get_bd_ports FCLK_CLK0] [get_bd_pins axi_bram_ctrl/s_axi_aclk] [get_bd_pins axi_smc/aclk] [get_bd_pins processing_system7_0/FCLK_CLK0] [get_bd_pins processing_system7_0/M_AXI_GP0_ACLK] [get_bd_pins rst_ps7_0_100M/slowest_sync_clk]
+  connect_bd_net -net processing_system7_0_FCLK_RESET0_N [get_bd_ports FCLK_RESET0_N] [get_bd_pins processing_system7_0/FCLK_RESET0_N] [get_bd_pins rst_ps7_0_100M/ext_reset_in]
+  connect_bd_net -net rst_ps7_0_100M_peripheral_aresetn [get_bd_pins axi_bram_ctrl/s_axi_aresetn] [get_bd_pins axi_smc/aresetn] [get_bd_pins rst_ps7_0_100M/peripheral_aresetn]
+
+  # Create address segments
+  create_bd_addr_seg -range 0x00020000 -offset 0x40000000 [get_bd_addr_spaces processing_system7_0/Data] [get_bd_addr_segs axi_bram_ctrl/S_AXI/Mem0] SEG_axi_bram_ctrl_Mem0
+
+
+  # Restore current instance
+  current_bd_instance $oldCurInst
+
+  save_bd_design
+}
+# End of create_root_design()
+
+
+##################################################################
+# MAIN FLOW
+##################################################################
+
+create_root_design ""
+
+

tools/xilinx/clkpll.xci

@@ -0,0 +1,793 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<spirit:design xmlns:xilinx="http://www.xilinx.com" xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+  <spirit:vendor>xilinx.com</spirit:vendor>
+  <spirit:library>xci</spirit:library>
+  <spirit:name>unknown</spirit:name>
+  <spirit:version>1.0</spirit:version>
+  <spirit:componentInstances>
+    <spirit:componentInstance>
+      <spirit:instanceName>clkpll</spirit:instanceName>
+      <spirit:componentRef spirit:vendor="xilinx.com" spirit:library="ip" spirit:name="clk_wiz" spirit:version="6.0"/>
+      <spirit:configurableElementValues>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLKFB_IN_D.CAN_DEBUG">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLKFB_IN_D.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLKFB_OUT_D.CAN_DEBUG">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLKFB_OUT_D.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK_IN1_D.CAN_DEBUG">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK_IN1_D.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK_IN2_D.CAN_DEBUG">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLK_IN2_D.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_IN1.ASSOCIATED_BUSIF"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_IN1.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_IN1.ASSOCIATED_RESET"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_IN1.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_IN1.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_IN1.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_IN1.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_IN1.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_OUT1.ASSOCIATED_BUSIF"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_OUT1.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_OUT1.ASSOCIATED_RESET"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_OUT1.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_OUT1.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_OUT1.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_OUT1.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.CLOCK_CLK_OUT1.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.INTR.PortWidth">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.INTR.SENSITIVITY">LEVEL_HIGH</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.REF_CLK.ASSOCIATED_BUSIF"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.REF_CLK.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.REF_CLK.ASSOCIATED_RESET"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.REF_CLK.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.REF_CLK.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.REF_CLK.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.REF_CLK.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.REF_CLK.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.RESET.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.RESETN.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_ACLK.ASSOCIATED_PORT"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_ACLK.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_ACLK.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_ACLK.FREQ_TOLERANCE_HZ">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_ACLK.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_ACLK.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.ADDR_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.ARUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.AWUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.BUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.CLK_DOMAIN"/>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.DATA_WIDTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.FREQ_HZ">100000000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_BRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_CACHE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_LOCK">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_PROT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_QOS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_REGION">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_RRESP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_WSTRB">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.ID_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.MAX_BURST_LENGTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.NUM_READ_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.NUM_READ_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.NUM_WRITE_OUTSTANDING">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.NUM_WRITE_THREADS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.PHASE">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.PROTOCOL">AXI4LITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.READ_WRITE_MODE">READ_WRITE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.RUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.RUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.SUPPORTS_NARROW_BURST">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.WUSER_BITS_PER_BYTE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.WUSER_WIDTH">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="BUSIFPARAM_VALUE.S_AXI_RESETN.INSERT_VIP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_AUTO_PRIMITIVE">MMCM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CDDCDONE_PORT">cddcdone</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CDDCREQ_PORT">cddcreq</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKFBOUT_1">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKFBOUT_2">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKFB_IN_N_PORT">clkfb_in_n</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKFB_IN_PORT">clkfb_in</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKFB_IN_P_PORT">clkfb_in_p</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKFB_IN_SIGNALING">SINGLE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKFB_OUT_N_PORT">clkfb_out_n</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKFB_OUT_PORT">clkfb_out</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKFB_OUT_P_PORT">clkfb_out_p</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKFB_STOPPED_PORT">clkfb_stopped</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKIN1_JITTER_PS">80.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKIN2_JITTER_PS">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT0_1">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT0_2">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT0_ACTUAL_FREQ">100.00000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_1">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_2">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_ACTUAL_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_DUTY_CYCLE">50.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_OUT_FREQ">100.00000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT1_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_1">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_2">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_ACTUAL_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT2_USED">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_1">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_2">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_ACTUAL_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT3_USED">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_1">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_2">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_ACTUAL_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT4_USED">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_1">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_2">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_ACTUAL_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT5_USED">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_1">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_2">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_ACTUAL_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT6_USED">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT7_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT7_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT7_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT7_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT7_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT7_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT7_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT7_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT7_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUT7_USED">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLKOUTPHY_MODE">VCO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLK_IN_SEL_PORT">clk_in_sel</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLK_OUT1_PORT">outclk_0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLK_OUT2_PORT">clk_out2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLK_OUT3_PORT">clk_out3</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLK_OUT4_PORT">clk_out4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLK_OUT5_PORT">clk_out5</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLK_OUT6_PORT">clk_out6</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLK_OUT7_PORT">clk_out7</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLK_VALID_PORT">CLK_VALID</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_CLOCK_MGR_TYPE">NA</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DADDR_PORT">daddr</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DCLK_PORT">dclk</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DEN_PORT">den</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIN_PORT">din</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIVCLK">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIVIDE1_AUTO">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIVIDE2_AUTO">0.1111111111111111</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIVIDE3_AUTO">0.1111111111111111</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIVIDE4_AUTO">0.1111111111111111</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIVIDE5_AUTO">0.1111111111111111</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIVIDE6_AUTO">0.1111111111111111</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DIVIDE7_AUTO">0.1111111111111111</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DOUT_PORT">dout</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DRDY_PORT">drdy</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_DWE_PORT">dwe</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_D_MAX">42.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_D_MIN">1.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ENABLE_CLKOUTPHY">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ENABLE_CLOCK_MONITOR">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ENABLE_USER_CLOCK0">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ENABLE_USER_CLOCK1">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ENABLE_USER_CLOCK2">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_ENABLE_USER_CLOCK3">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_Enable_PLL0">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_Enable_PLL1">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_FEEDBACK_SOURCE">FDBK_AUTO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_FILTER_1">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_FILTER_2">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_HAS_CDDC">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INCLK_SUM_ROW0">Input Clock   Freq (MHz)    Input Jitter (UI)</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INCLK_SUM_ROW1">__primary_________125.000____________0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INCLK_SUM_ROW2">no_secondary_input_clock </spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INPUT_CLK_STOPPED_PORT">input_clk_stopped</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_INTERFACE_SELECTION">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_IN_FREQ_UNITS">Units_MHz</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_JITTER_SEL">No_Jitter</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_LOCKED_PORT">locked</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_LOCK_1">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_LOCK_2">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_LOCK_3">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCMBUFGCEDIV">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCMBUFGCEDIV1">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCMBUFGCEDIV2">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCMBUFGCEDIV3">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCMBUFGCEDIV4">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCMBUFGCEDIV5">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCMBUFGCEDIV6">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCMBUFGCEDIV7">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_BANDWIDTH">OPTIMIZED</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKFBOUT_MULT_F">36.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKFBOUT_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKFBOUT_USE_FINE_PS">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKIN1_PERIOD">8.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKIN2_PERIOD">10.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT0_DIVIDE_F">9.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT0_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT0_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT0_USE_FINE_PS">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT1_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT1_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT1_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT1_USE_FINE_PS">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT2_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT2_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT2_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT2_USE_FINE_PS">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT3_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT3_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT3_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT3_USE_FINE_PS">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT4_CASCADE">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT4_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT4_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT4_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT4_USE_FINE_PS">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT5_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT5_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT5_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT5_USE_FINE_PS">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT6_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT6_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT6_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLKOUT6_USE_FINE_PS">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_CLOCK_HOLD">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_COMPENSATION">ZHOLD</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_DIVCLK_DIVIDE">5</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_NOTES">None</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_REF_JITTER1">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_REF_JITTER2">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_MMCM_STARTUP_WAIT">FALSE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_M_MAX">64.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_M_MIN">2.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_NUM_OUT_CLKS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OPTIMIZE_CLOCKING_STRUCTURE_EN">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OUTCLK_SUM_ROW0A"> Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OUTCLK_SUM_ROW0B">  Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OUTCLK_SUM_ROW1">outclk_0__100.00000______0.000______50.0______237.312____249.865</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OUTCLK_SUM_ROW2">no_CLK_OUT2_output</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OUTCLK_SUM_ROW3">no_CLK_OUT3_output</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OUTCLK_SUM_ROW4">no_CLK_OUT4_output</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OUTCLK_SUM_ROW5">no_CLK_OUT5_output</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OUTCLK_SUM_ROW6">no_CLK_OUT6_output</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OUTCLK_SUM_ROW7">no_CLK_OUT7_output</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OVERRIDE_MMCM">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_OVERRIDE_PLL">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_O_MAX">128.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_O_MIN">1.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PHASESHIFT_MODE">WAVEFORM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLATFORM">UNKNOWN</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLLBUFGCEDIV">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLLBUFGCEDIV1">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLLBUFGCEDIV2">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLLBUFGCEDIV3">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLLBUFGCEDIV4">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_BANDWIDTH">OPTIMIZED</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKFBOUT_MULT">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKFBOUT_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKIN_PERIOD">1.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT0_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT0_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT0_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT1_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT1_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT1_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT2_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT2_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT2_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT3_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT3_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT3_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT4_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT4_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT4_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT5_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT5_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLKOUT5_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_CLK_FEEDBACK">CLKFBOUT</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_COMPENSATION">SYSTEM_SYNCHRONOUS</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_DIVCLK_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_NOTES">No notes</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PLL_REF_JITTER">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_POWER_DOWN_PORT">power_down</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_POWER_REG">0000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRECISION">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIMARY_PORT">refclk</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIMITIVE">PLL</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIMTYPE_SEL">AUTO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_IN_FREQ">125.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_IN_JITTER">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_IN_TIMEPERIOD">10.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PRIM_SOURCE">Single_ended_clock_capable_pin</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PSCLK_PORT">psclk</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PSDONE_PORT">psdone</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PSEN_PORT">psen</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_PSINCDEC_PORT">psincdec</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_REF_CLK_FREQ">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RESET_LOW">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_RESET_PORT">reset</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SECONDARY_IN_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SECONDARY_IN_JITTER">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SECONDARY_IN_TIMEPERIOD">10.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SECONDARY_PORT">clk_in2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SECONDARY_SOURCE">Single_ended_clock_capable_pin</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SS_MODE">CENTER_HIGH</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SS_MOD_PERIOD">4000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_SS_MOD_TIME">0.004</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_STATUS_PORT">STATUS</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_S_AXI_ADDR_WIDTH">11</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_S_AXI_DATA_WIDTH">32</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USER_CLK_FREQ0">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USER_CLK_FREQ1">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USER_CLK_FREQ2">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USER_CLK_FREQ3">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_CLKFB_STOPPED">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_CLKOUT1_BAR">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_CLKOUT2_BAR">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_CLKOUT3_BAR">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_CLKOUT4_BAR">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_CLK_VALID">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_CLOCK_SEQUENCING">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_DYN_PHASE_SHIFT">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_DYN_RECONFIG">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_FAST_SIMULATION">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_FREEZE">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_FREQ_SYNTH">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_INCLK_STOPPED">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_INCLK_SWITCHOVER">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_LOCKED">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_MAX_I_JITTER">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_MIN_O_JITTER">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_MIN_POWER">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_PHASE_ALIGNMENT">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_POWER_DOWN">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_RESET">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_SAFE_CLOCK_STARTUP">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_SPREAD_SPECTRUM">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_USE_STATUS">0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_VCO_MAX">1600.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.C_VCO_MIN">800.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="MODELPARAM_VALUE.c_component_name">clkpll</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.AUTO_PRIMITIVE">MMCM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.AXI_DRP">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CALC_DONE">empty</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CDDCDONE_PORT">cddcdone</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CDDCREQ_PORT">cddcreq</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKFB_IN_N_PORT">clkfb_in_n</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKFB_IN_PORT">clkfb_in</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKFB_IN_P_PORT">clkfb_in_p</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKFB_IN_SIGNALING">SINGLE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKFB_OUT_N_PORT">clkfb_out_n</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKFB_OUT_PORT">clkfb_out</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKFB_OUT_P_PORT">clkfb_out_p</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKFB_STOPPED_PORT">clkfb_stopped</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKIN1_JITTER_PS">80.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKIN1_UI_JITTER">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKIN2_JITTER_PS">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKIN2_UI_JITTER">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT1_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT1_JITTER">237.312</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT1_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT1_PHASE_ERROR">249.865</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT1_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT1_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT1_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT1_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT1_USED">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT2_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT2_JITTER">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT2_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT2_PHASE_ERROR">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT2_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT2_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT2_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT2_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT2_USED">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT3_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT3_JITTER">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT3_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT3_PHASE_ERROR">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT3_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT3_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT3_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT3_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT3_USED">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT4_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT4_JITTER">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT4_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT4_PHASE_ERROR">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT4_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT4_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT4_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT4_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT4_USED">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT5_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT5_JITTER">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT5_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT5_PHASE_ERROR">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT5_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT5_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT5_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT5_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT5_USED">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT6_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT6_JITTER">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT6_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT6_PHASE_ERROR">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT6_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT6_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT6_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT6_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT6_USED">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT7_DRIVES">BUFG</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT7_JITTER">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT7_MATCHED_ROUTING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT7_PHASE_ERROR">0.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT7_REQUESTED_DUTY_CYCLE">50.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT7_REQUESTED_OUT_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT7_REQUESTED_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT7_SEQUENCE_NUMBER">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUT7_USED">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLKOUTPHY_REQUESTED_FREQ">600.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_IN1_BOARD_INTERFACE">Custom</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_IN2_BOARD_INTERFACE">Custom</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_IN_SEL_PORT">clk_in_sel</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT1_PORT">outclk_0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT1_USE_FINE_PS_GUI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT2_PORT">clk_out2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT2_USE_FINE_PS_GUI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT3_PORT">clk_out3</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT3_USE_FINE_PS_GUI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT4_PORT">clk_out4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT4_USE_FINE_PS_GUI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT5_PORT">clk_out5</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT5_USE_FINE_PS_GUI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT6_PORT">clk_out6</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT6_USE_FINE_PS_GUI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT7_PORT">clk_out7</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_OUT7_USE_FINE_PS_GUI">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLK_VALID_PORT">CLK_VALID</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.CLOCK_MGR_TYPE">auto</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Component_Name">clkpll</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.DADDR_PORT">daddr</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.DCLK_PORT">dclk</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.DEN_PORT">den</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.DIFF_CLK_IN1_BOARD_INTERFACE">Custom</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.DIFF_CLK_IN2_BOARD_INTERFACE">Custom</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.DIN_PORT">din</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.DOUT_PORT">dout</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.DRDY_PORT">drdy</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.DWE_PORT">dwe</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ENABLE_CDDC">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ENABLE_CLKOUTPHY">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ENABLE_CLOCK_MONITOR">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ENABLE_USER_CLOCK0">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ENABLE_USER_CLOCK1">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ENABLE_USER_CLOCK2">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.ENABLE_USER_CLOCK3">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_PLL0">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.Enable_PLL1">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.FEEDBACK_SOURCE">FDBK_AUTO</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.INPUT_CLK_STOPPED_PORT">input_clk_stopped</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.INPUT_MODE">frequency</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.INTERFACE_SELECTION">Enable_AXI</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.IN_FREQ_UNITS">Units_MHz</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.IN_JITTER_UNITS">Units_UI</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.JITTER_OPTIONS">UI</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.JITTER_SEL">No_Jitter</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.LOCKED_PORT">locked</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_BANDWIDTH">OPTIMIZED</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKFBOUT_MULT_F">36</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKFBOUT_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKFBOUT_USE_FINE_PS">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKIN1_PERIOD">8.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKIN2_PERIOD">10.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT0_DIVIDE_F">9</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT0_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT0_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT0_USE_FINE_PS">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT1_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT1_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT1_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT1_USE_FINE_PS">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT2_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT2_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT2_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT2_USE_FINE_PS">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT3_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT3_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT3_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT3_USE_FINE_PS">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT4_CASCADE">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT4_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT4_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT4_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT4_USE_FINE_PS">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT5_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT5_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT5_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT5_USE_FINE_PS">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT6_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT6_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT6_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLKOUT6_USE_FINE_PS">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_CLOCK_HOLD">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_COMPENSATION">ZHOLD</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_DIVCLK_DIVIDE">5</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_NOTES">None</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_REF_JITTER1">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_REF_JITTER2">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.MMCM_STARTUP_WAIT">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.NUM_OUT_CLKS">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.OPTIMIZE_CLOCKING_STRUCTURE_EN">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.OVERRIDE_MMCM">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.OVERRIDE_PLL">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PHASESHIFT_MODE">WAVEFORM</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PHASE_DUTY_CONFIG">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLATFORM">UNKNOWN</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_BANDWIDTH">OPTIMIZED</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKFBOUT_MULT">4</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKFBOUT_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKIN_PERIOD">8.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT0_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT0_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT0_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT1_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT1_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT1_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT2_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT2_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT2_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT3_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT3_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT3_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT4_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT4_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT4_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT5_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT5_DUTY_CYCLE">0.500</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLKOUT5_PHASE">0.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_CLK_FEEDBACK">CLKFBOUT</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_COMPENSATION">SYSTEM_SYNCHRONOUS</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_DIVCLK_DIVIDE">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_NOTES">None</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PLL_REF_JITTER">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.POWER_DOWN_PORT">power_down</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PRECISION">1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PRIMARY_PORT">refclk</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PRIMITIVE">PLL</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PRIMTYPE_SEL">mmcm_adv</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PRIM_IN_FREQ">125.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PRIM_IN_JITTER">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PRIM_IN_TIMEPERIOD">10.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PRIM_SOURCE">Single_ended_clock_capable_pin</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PSCLK_PORT">psclk</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PSDONE_PORT">psdone</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PSEN_PORT">psen</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.PSINCDEC_PORT">psincdec</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.REF_CLK_FREQ">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.RELATIVE_INCLK">REL_PRIMARY</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.RESET_BOARD_INTERFACE">Custom</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.RESET_PORT">reset</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.RESET_TYPE">ACTIVE_HIGH</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.SECONDARY_IN_FREQ">100.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.SECONDARY_IN_JITTER">0.010</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.SECONDARY_IN_TIMEPERIOD">10.000</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.SECONDARY_PORT">clk_in2</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.SECONDARY_SOURCE">Single_ended_clock_capable_pin</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.SS_MODE">CENTER_HIGH</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.SS_MOD_FREQ">250</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.SS_MOD_TIME">0.004</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.STATUS_PORT">STATUS</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.SUMMARY_STRINGS">empty</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USER_CLK_FREQ0">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USER_CLK_FREQ1">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USER_CLK_FREQ2">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USER_CLK_FREQ3">100.0</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_BOARD_FLOW">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_CLKFB_STOPPED">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_CLK_VALID">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_CLOCK_SEQUENCING">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_DYN_PHASE_SHIFT">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_DYN_RECONFIG">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_FREEZE">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_FREQ_SYNTH">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_INCLK_STOPPED">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_INCLK_SWITCHOVER">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_LOCKED">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_MAX_I_JITTER">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_MIN_O_JITTER">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_MIN_POWER">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_PHASE_ALIGNMENT">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_POWER_DOWN">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_RESET">true</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_SAFE_CLOCK_STARTUP">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_SPREAD_SPECTRUM">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PARAM_VALUE.USE_STATUS">false</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.ARCHITECTURE">zynq</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BASE_BOARD_PART"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.BOARD_CONNECTIONS"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.DEVICE">xc7z020</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PACKAGE">clg484</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.PREFHDL">VHDL</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SILICON_REVISION"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SIMULATOR_LANGUAGE">MIXED</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.SPEEDGRADE">-1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.STATIC_POWER"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.TEMPERATURE_GRADE"/>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_CUSTOMIZATION">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="PROJECT_PARAM.USE_RDI_GENERATION">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPCONTEXT">IP_Flow</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.IPREVISION">10</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.MANAGED">TRUE</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.OUTPUTDIR">../../../../Qlaser.gen/sources_1/ip/clkpll</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SELECTEDSIMMODEL"/>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SHAREDDIR">.</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SWVERSION">2022.1</spirit:configurableElementValue>
+        <spirit:configurableElementValue spirit:referenceId="RUNTIME_PARAM.SYNTHESISFLOW">OUT_OF_CONTEXT</spirit:configurableElementValue>
+      </spirit:configurableElementValues>
+      <spirit:vendorExtensions>
+        <xilinx:componentInstanceExtensions>
+          <xilinx:configElementInfos>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.ADDR_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.ARUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.AWUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.BUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.DATA_WIDTH" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_BRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_BURST" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_CACHE" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_LOCK" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_PROT" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_QOS" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_REGION" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_RRESP" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.HAS_WSTRB" xilinx:valueSource="auto"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.ID_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.PROTOCOL" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.RUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="BUSIFPARAM_VALUE.S_AXI_LITE.WUSER_WIDTH" xilinx:valueSource="constant"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLKIN1_JITTER_PS" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLKOUT1_DRIVES" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLKOUT1_JITTER" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLKOUT1_PHASE_ERROR" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLKOUT2_DRIVES" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLKOUT3_DRIVES" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLKOUT4_DRIVES" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLKOUT5_DRIVES" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLKOUT6_DRIVES" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLKOUT7_DRIVES" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.CLK_OUT1_PORT" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.MMCM_BANDWIDTH" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.MMCM_CLKFBOUT_MULT_F" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.MMCM_CLKIN1_PERIOD" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.MMCM_CLKIN2_PERIOD" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.MMCM_CLKOUT0_DIVIDE_F" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.MMCM_COMPENSATION" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.MMCM_DIVCLK_DIVIDE" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.PLL_CLKIN_PERIOD" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.PRIMARY_PORT" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.PRIMITIVE" xilinx:valueSource="user"/>
+            <xilinx:configElementInfo xilinx:referenceId="PARAM_VALUE.PRIM_IN_FREQ" xilinx:valueSource="user"/>
+          </xilinx:configElementInfos>
+          <xilinx:boundaryDescriptionInfo>
+            <xilinx:boundaryDescription xilinx:boundaryDescriptionJSON="{
+              &quot;schema&quot;: &quot;xilinx.com:schema:json_boundary:1.0&quot;,
+              &quot;boundary&quot;: {
+                &quot;ports&quot;: {
+                  &quot;reset&quot;: [ { &quot;direction&quot;: &quot;in&quot;, &quot;driver_value&quot;: &quot;0&quot; } ],
+                  &quot;refclk&quot;: [ { &quot;direction&quot;: &quot;in&quot; } ],
+                  &quot;outclk_0&quot;: [ { &quot;direction&quot;: &quot;out&quot; } ],
+                  &quot;locked&quot;: [ { &quot;direction&quot;: &quot;out&quot; } ]
+                },
+                &quot;interfaces&quot;: {
+                  &quot;reset&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:signal:reset:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:signal:reset_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;POLARITY&quot;: [ { &quot;value&quot;: &quot;ACTIVE_HIGH&quot;, &quot;value_src&quot;: &quot;constant&quot;, &quot;usage&quot;: &quot;all&quot; } ],
+                      &quot;BOARD.ASSOCIATED_PARAM&quot;: [ { &quot;value&quot;: &quot;RESET_BOARD_INTERFACE&quot;, &quot;value_src&quot;: &quot;constant&quot;, &quot;usage&quot;: &quot;all&quot; } ],
+                      &quot;INSERT_VIP&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;user&quot;, &quot;format&quot;: &quot;long&quot;, &quot;usage&quot;: &quot;simulation.rtl&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ]
+                    },
+                    &quot;port_maps&quot;: {
+                      &quot;RST&quot;: [ { &quot;physical_name&quot;: &quot;reset&quot; } ]
+                    }
+                  },
+                  &quot;clock_CLK_IN1&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:signal:clock:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:signal:clock_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;slave&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;FREQ_HZ&quot;: [ { &quot;value&quot;: &quot;100000000&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;FREQ_TOLERANCE_HZ&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;PHASE&quot;: [ { &quot;value&quot;: &quot;0.0&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;float&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;CLK_DOMAIN&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_BUSIF&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_PORT&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_RESET&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;INSERT_VIP&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;user&quot;, &quot;format&quot;: &quot;long&quot;, &quot;usage&quot;: &quot;simulation.rtl&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;BOARD.ASSOCIATED_PARAM&quot;: [ { &quot;value&quot;: &quot;CLK_IN1_BOARD_INTERFACE&quot;, &quot;usage&quot;: &quot;all&quot;, &quot;is_static_object&quot;: false } ]
+                    },
+                    &quot;port_maps&quot;: {
+                      &quot;CLK_IN1&quot;: [ { &quot;physical_name&quot;: &quot;refclk&quot; } ]
+                    }
+                  },
+                  &quot;clock_CLK_OUT1&quot;: {
+                    &quot;vlnv&quot;: &quot;xilinx.com:signal:clock:1.0&quot;,
+                    &quot;abstraction_type&quot;: &quot;xilinx.com:signal:clock_rtl:1.0&quot;,
+                    &quot;mode&quot;: &quot;master&quot;,
+                    &quot;parameters&quot;: {
+                      &quot;FREQ_HZ&quot;: [ { &quot;value&quot;: &quot;100000000&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;FREQ_TOLERANCE_HZ&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;long&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;PHASE&quot;: [ { &quot;value&quot;: &quot;0.0&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;format&quot;: &quot;float&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;CLK_DOMAIN&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_BUSIF&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_PORT&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;ASSOCIATED_RESET&quot;: [ { &quot;value&quot;: &quot;&quot;, &quot;resolve_type&quot;: &quot;generated&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ],
+                      &quot;INSERT_VIP&quot;: [ { &quot;value&quot;: &quot;0&quot;, &quot;resolve_type&quot;: &quot;user&quot;, &quot;format&quot;: &quot;long&quot;, &quot;usage&quot;: &quot;simulation.rtl&quot;, &quot;is_ips_inferred&quot;: true, &quot;is_static_object&quot;: false } ]
+                    },
+                    &quot;port_maps&quot;: {
+                      &quot;CLK_OUT1&quot;: [ { &quot;physical_name&quot;: &quot;outclk_0&quot; } ]
+                    }
+                  }
+                }
+              }
+            }"/>
+          </xilinx:boundaryDescriptionInfo>
+        </xilinx:componentInstanceExtensions>
+      </spirit:vendorExtensions>
+    </spirit:componentInstance>
+  </spirit:componentInstances>
+</spirit:design>

tools/xilinx/pinout.xdc

@@ -0,0 +1,119 @@
+## 125MHz Clock from Ethernet PHY
+set_property -dict {PACKAGE_PIN D18 IOSTANDARD LVCMOS33} [get_ports p_clk]
+
+## Buttons
+set_property -dict {PACKAGE_PIN C17 IOSTANDARD LVCMOS33} [get_ports p_reset]
+#set_property -dict { PACKAGE_PIN C18   IOSTANDARD LVCMOS33 } [get_ports { p_trigger }]; #IO_L11N_T1_SRCC Sch=btn[1]
+
+## RGB LEDs
+set_property -dict {PACKAGE_PIN A17 IOSTANDARD LVCMOS33} [get_ports {p_leds0_rgb[0]}]
+set_property -dict {PACKAGE_PIN B16 IOSTANDARD LVCMOS33} [get_ports {p_leds0_rgb[1]}]
+set_property -dict {PACKAGE_PIN B17 IOSTANDARD LVCMOS33} [get_ports {p_leds0_rgb[2]}]
+
+set_property -dict {PACKAGE_PIN A16 IOSTANDARD LVCMOS33} [get_ports {p_leds1_rgb[0]}]
+set_property -dict {PACKAGE_PIN A18 IOSTANDARD LVCMOS33} [get_ports {p_leds1_rgb[1]}]
+set_property -dict {PACKAGE_PIN A19 IOSTANDARD LVCMOS33} [get_ports {p_leds1_rgb[2]}]
+
+
+## Pmod Header JA
+set_property -dict { PACKAGE_PIN B15   IOSTANDARD LVCMOS33 } [get_ports { p_debug_out[0] }]; #IO_0 Sch=ja1_fpga
+set_property -dict { PACKAGE_PIN C15   IOSTANDARD LVCMOS33 } [get_ports { p_debug_out[1] }]; #IO_25 Sch=ja2_fpga
+set_property -dict { PACKAGE_PIN D15   IOSTANDARD LVCMOS33 } [get_ports { p_serial_txd }]; #IO_L1N_T0_AD0N Sch=ja3_fpga
+set_property -dict { PACKAGE_PIN E16   IOSTANDARD LVCMOS33 } [get_ports { p_serial_rxd }]; #IO_L1P_T0_AD0P Sch=ja4_fpga
+set_property -dict { PACKAGE_PIN E15   IOSTANDARD LVCMOS33 } [get_ports { p_dc0_cs_n }]; #IO_L2N_T0_AD8N Sch=ja7_fpga
+set_property -dict { PACKAGE_PIN F17   IOSTANDARD LVCMOS33 } [get_ports { p_dc0_mosi }]; #IO_L2P_T0_AD8P Sch=ja8_fpga
+#set_property -dict { PACKAGE_PIN F16   IOSTANDARD LVCMOS33 } [get_ports { ja[6] }]; #IO_L3N_T0_DQS_AD1N Sch=ja9_fpga
+set_property -dict { PACKAGE_PIN G16   IOSTANDARD LVCMOS33 } [get_ports { p_dc0_sclk }]; #IO_L3P_T0_DQS_AD1P Sch=ja10_fpga
+
+## Pmod Header JB
+set_property -dict { PACKAGE_PIN G15   IOSTANDARD LVCMOS33 } [get_ports { p_dc2_cs_n }]; #IO_L4N_T0 Sch=jb1_fpga
+set_property -dict { PACKAGE_PIN D16   IOSTANDARD LVCMOS33 } [get_ports { p_dc2_mosi }]; #IO_L4P_T0 Sch=jb2_fpga
+#set_property -dict { PACKAGE_PIN D17   IOSTANDARD LVCMOS33 } [get_ports { jb[2] }]; #IO_L5N_T0_AD9N Sch=jb3_fpga
+set_property -dict { PACKAGE_PIN E18   IOSTANDARD LVCMOS33 } [get_ports { p_dc2_sclk }]; #IO_L5P_T0_AD9P Sch=jb4_fpga
+set_property -dict { PACKAGE_PIN F18   IOSTANDARD LVCMOS33 } [get_ports { p_dc1_cs_n }]; #IO_L6N_T0_VREF Sch=jb7_fpga
+set_property -dict { PACKAGE_PIN G17   IOSTANDARD LVCMOS33 } [get_ports { p_dc1_mosi }]; #IO_L6P_T0 Sch=jb8_fpga
+#set_property -dict { PACKAGE_PIN H18   IOSTANDARD LVCMOS33 } [get_ports { jb[6] }]; #IO_L7N_T1_AD2N Sch=jb9_fpga
+set_property -dict { PACKAGE_PIN H17   IOSTANDARD LVCMOS33 } [get_ports { p_dc1_sclk }]; #IO_L7P_T1_AD2P Sch=jb10_fpga
+
+# PLACEHOLDER PIN ASSIGNMENTS FOR SPI3
+#set_property -dict { PACKAGE_PIN G19   IOSTANDARD LVCMOS33 } [get_ports { p_dc3_cs_n }]; #IO_L4N_T0 Sch=jb1_fpga
+#set_property -dict { PACKAGE_PIN G20   IOSTANDARD LVCMOS33 } [get_ports { p_dc3_mosi }]; #IO_L4P_T0 Sch=jb2_fpga
+#set_property -dict { PACKAGE_PIN D17   IOSTANDARD LVCMOS33 } [get_ports { jb[2] }]; #IO_L5N_T0_AD9N Sch=jb3_fpga
+#set_property -dict { PACKAGE_PIN G21   IOSTANDARD LVCMOS33 } [get_ports { p_dc3_sclk }]; #IO_L5P_T0_AD9P Sch=jb4_fpga
+
+## Syzygy Port A
+#set_property -dict { PACKAGE_PIN N20  } [get_ports { syzygy_a_c2p_clk_n }]; #IO_L14N_T2_SRCC Sch=syzygy_a_c2p_clk_n
+#set_property -dict { PACKAGE_PIN N19  } [get_ports { syzygy_a_c2p_clk_p }]; #IO_L14P_T2_SRCC Sch=syzygy_a_c2p_clk_p
+#set_property -dict { PACKAGE_PIN T17  } [get_ports { syzygy_a_d_n[0] }]; #IO_L21N_T3_DQS Sch=syzygy_a_d_n[0]
+#set_property -dict { PACKAGE_PIN T16  } [get_ports { syzygy_a_d_p[0] }]; #IO_L21P_T3_DQS Sch=syzygy_a_d_p[0]
+#set_property -dict { PACKAGE_PIN T19  } [get_ports { syzygy_a_d_n[1] }]; #IO_L22N_T3 Sch=syzygy_a_d_n[1]
+#set_property -dict { PACKAGE_PIN R19  } [get_ports { syzygy_a_d_p[1] }]; #IO_L22P_T3 Sch=syzygy_a_d_p[1]
+#set_property -dict { PACKAGE_PIN T18  } [get_ports { syzygy_a_d_n[2] }]; #IO_L23N_T3 Sch=syzygy_a_d_n[2]
+#set_property -dict { PACKAGE_PIN R18  } [get_ports { syzygy_a_d_p[2] }]; #IO_L23P_T3 Sch=syzygy_a_d_p[2]
+#set_property -dict { PACKAGE_PIN P18  } [get_ports { syzygy_a_d_n[3] }]; #IO_L20N_T3 Sch=syzygy_a_d_n[3]
+#set_property -dict { PACKAGE_PIN P17  } [get_ports { syzygy_a_d_p[3] }]; #IO_L20P_T3 Sch=syzygy_a_d_p[3]
+#set_property -dict { PACKAGE_PIN R16  } [get_ports { syzygy_a_d_n[4] }]; #IO_L24N_T3 Sch=syzygy_a_d_n[4]
+#set_property -dict { PACKAGE_PIN P16  } [get_ports { syzygy_a_d_p[4] }]; #IO_L24P_T3 Sch=syzygy_a_d_p[4]
+#set_property -dict { PACKAGE_PIN P15  } [get_ports { syzygy_a_d_n[5] }]; #IO_L19N_T3_VREF Sch=syzygy_a_d_n[5]
+#set_property -dict { PACKAGE_PIN N15  } [get_ports { syzygy_a_d_p[5] }]; #IO_L19P_T3 Sch=syzygy_a_d_p[5]
+#set_property -dict { PACKAGE_PIN K18  } [get_ports { syzygy_a_d_n[6] }]; #IO_L7N_T1 Sch=syzygy_a_d_n[6]
+#set_property -dict { PACKAGE_PIN J18  } [get_ports { syzygy_a_d_p[6] }]; #IO_L7P_T1 Sch=syzygy_a_d_p[6]
+#set_property -dict { PACKAGE_PIN K21  } [get_ports { syzygy_a_d_n[7] }]; #IO_L9N_T1_DQS Sch=syzygy_a_d_n[7]
+#set_property -dict { PACKAGE_PIN J20  } [get_ports { syzygy_a_d_p[7] }]; #IO_L9P_T1_DQS Sch=syzygy_a_d_p[7]
+#set_property -dict { PACKAGE_PIN M20  } [get_ports { syzygy_a_p2c_clk_n }]; #IO_L13N_T2_MRCC Sch=syzygy_a_p2c_clk_n
+#set_property -dict { PACKAGE_PIN M19  } [get_ports { syzygy_a_p2c_clk_p }]; #IO_L13P_T2_MRCC Sch=syzygy_a_p2c_clk_p
+#set_property -dict { PACKAGE_PIN L19  } [get_ports { syzygy_a_s[16] }]; #IO_L12N_T1_MRCC Sch=syzygy_a_s[16]
+#set_property -dict { PACKAGE_PIN K20  } [get_ports { syzygy_a_s[17] }]; #IO_L11N_T1_SRCC Sch=syzygy_a_s[17]
+#set_property -dict { PACKAGE_PIN L18  } [get_ports { syzygy_a_s[18] }]; #IO_L12P_T1_MRCC Sch=syzygy_a_s[18]
+#set_property -dict { PACKAGE_PIN K19  } [get_ports { syzygy_a_s[19] }]; #IO_L11P_T1_SRCC Sch=syzygy_a_s[19]
+#set_property -dict { PACKAGE_PIN L22  } [get_ports { syzygy_a_s[20] }]; #IO_L10N_T1 Sch=syzygy_a_s[20]
+#set_property -dict { PACKAGE_PIN J22  } [get_ports { syzygy_a_s[21] }]; #IO_L8N_T1 Sch=syzygy_a_s[21]
+#set_property -dict { PACKAGE_PIN L21  } [get_ports { syzygy_a_s[22] }]; #IO_L10P_T1 Sch=syzygy_a_s[22]
+#set_property -dict { PACKAGE_PIN J21  } [get_ports { syzygy_a_s[23] }]; #IO_L8P_T1 Sch=syzygy_a_s[23]
+#set_property -dict { PACKAGE_PIN N22  } [get_ports { syzygy_a_s[24] }]; #IO_L16P_T2 Sch=syzygy_a_s[24]
+#set_property -dict { PACKAGE_PIN P22  } [get_ports { syzygy_a_s[25] }]; #IO_L16N_T2 Sch=syzygy_a_s[25]
+#set_property -dict { PACKAGE_PIN M21  } [get_ports { syzygy_a_s[26] }]; #IO_L15P_T2_DQS Sch=syzygy_a_s[26]
+#set_property -dict { PACKAGE_PIN M22  } [get_ports { syzygy_a_s[27] }]; #IO_L15N_T2_DQS Sch=syzygy_a_s[27]
+
+## Syzygy Port B
+#set_property -dict { PACKAGE_PIN Y16  } [get_ports { syzygy_b_c2p_clk_n }]; #IO_L14N_T2_SRCC Sch=syzygy_b_c2p_clk_n
+#set_property -dict { PACKAGE_PIN W16  } [get_ports { syzygy_b_c2p_clk_p }]; #IO_L14P_T2_SRCC Sch=syzygy_b_c2p_clk_p
+#set_property -dict { PACKAGE_PIN Y15  } [get_ports { syzygy_b_d_n[0] }]; #IO_L21N_T3_DQS Sch=syzygy_b_d_n[0]
+#set_property -dict { PACKAGE_PIN W15  } [get_ports { syzygy_b_d_p[0] }]; #IO_L21P_T3_DQS Sch=syzygy_b_d_p[0]
+#set_property -dict { PACKAGE_PIN W13  } [get_ports { syzygy_b_d_n[1] }]; #IO_L20N_T3 Sch=syzygy_b_d_n[1]
+#set_property -dict { PACKAGE_PIN V13  } [get_ports { syzygy_b_d_p[1] }]; #IO_L20P_T3 Sch=syzygy_b_d_p[1]
+#set_property -dict { PACKAGE_PIN AA13 } [get_ports { syzygy_b_d_n[2] }]; #IO_L23N_T3 Sch=syzygy_b_d_n[2]
+#set_property -dict { PACKAGE_PIN Y13  } [get_ports { syzygy_b_d_p[2] }]; #IO_L23P_T3 Sch=syzygy_b_d_p[2]
+#set_property -dict { PACKAGE_PIN AB15 } [get_ports { syzygy_b_d_n[3] }]; #IO_L24N_T3 Sch=syzygy_b_d_n[3]
+#set_property -dict { PACKAGE_PIN AB14 } [get_ports { syzygy_b_d_p[3] }]; #IO_L24P_T3 Sch=syzygy_b_d_p[3]
+#set_property -dict { PACKAGE_PIN AA14 } [get_ports { syzygy_b_d_n[4] }]; #IO_L22N_T3 Sch=syzygy_b_d_n[4]
+#set_property -dict { PACKAGE_PIN Y14  } [get_ports { syzygy_b_d_p[4] }]; #IO_L22P_T3 Sch=syzygy_b_d_p[4]
+#set_property -dict { PACKAGE_PIN V15  } [get_ports { syzygy_b_d_n[5] }]; #IO_L19N_T3_VREF Sch=syzygy_b_d_n[5]
+#set_property -dict { PACKAGE_PIN V14  } [get_ports { syzygy_b_d_p[5] }]; #IO_L19P_T3 Sch=syzygy_b_d_p[5]
+#set_property -dict { PACKAGE_PIN AB22 } [get_ports { syzygy_b_d_n[6] }]; #IO_L7N_T1 Sch=syzygy_b_d_n[6]
+#set_property -dict { PACKAGE_PIN AA22 } [get_ports { syzygy_b_d_p[6] }]; #IO_L7P_T1 Sch=syzygy_b_d_p[6]
+#set_property -dict { PACKAGE_PIN Y21  } [get_ports { syzygy_b_d_n[7] }]; #IO_L9N_T1_DQS Sch=syzygy_b_d_n[7]
+#set_property -dict { PACKAGE_PIN Y20  } [get_ports { syzygy_b_d_p[7] }]; #IO_L9P_T1_DQS Sch=syzygy_b_d_p[7]
+#set_property -dict { PACKAGE_PIN W18  } [get_ports { syzygy_b_p2c_clk_n }]; #IO_L13N_T2_MRCC Sch=syzygy_b_p2c_clk_n
+#set_property -dict { PACKAGE_PIN W17  } [get_ports { syzygy_b_p2c_clk_p }]; #IO_L13P_T2_MRCC Sch=syzygy_b_p2c_clk_p
+#set_property -dict { PACKAGE_PIN AA18 } [get_ports { syzygy_b_s[16] }]; #IO_L12N_T1_MRCC Sch=syzygy_b_s[16]
+#set_property -dict { PACKAGE_PIN AA19 } [get_ports { syzygy_b_s[17] }]; #IO_L11N_T1_SRCC Sch=syzygy_b_s[17]
+#set_property -dict { PACKAGE_PIN Y18  } [get_ports { syzygy_b_s[18] }]; #IO_L12P_T1_MRCC Sch=syzygy_b_s[18]
+#set_property -dict { PACKAGE_PIN Y19  } [get_ports { syzygy_b_s[19] }]; #IO_L11P_T1_SRCC Sch=syzygy_b_s[19]
+#set_property -dict { PACKAGE_PIN AB20 } [get_ports { syzygy_b_s[20] }]; #IO_L10N_T1 Sch=syzygy_b_s[20]
+#set_property -dict { PACKAGE_PIN AB21 } [get_ports { syzygy_b_s[21] }]; #IO_L8N_T1 Sch=syzygy_b_s[21]
+#set_property -dict { PACKAGE_PIN AB19 } [get_ports { syzygy_b_s[22] }]; #IO_L10P_T1 Sch=syzygy_b_s[22]
+#set_property -dict { PACKAGE_PIN AA21 } [get_ports { syzygy_b_s[23] }]; #IO_L8P_T1 Sch=syzygy_b_s[23]
+#set_property -dict { PACKAGE_PIN U16  } [get_ports { syzygy_b_s[24] }]; #IO_L15N_T2_DQS Sch=syzygy_b_s[24]
+#set_property -dict { PACKAGE_PIN U15  } [get_ports { syzygy_b_s[25] }]; #IO_L15P_T2_DQS Sch=syzygy_b_s[25]
+#set_property -dict { PACKAGE_PIN V17  } [get_ports { syzygy_b_s[26] }]; #IO_L16N_T2 Sch=syzygy_b_s[26]
+#set_property -dict { PACKAGE_PIN U17  } [get_ports { syzygy_b_s[27] }]; #IO_L16P_T2 Sch=syzygy_b_s[27]
+
+## Crypto SDA 
+#set_property -dict { PACKAGE_PIN D22   IOSTANDARD LVCMOS33 } [get_ports { crypto_sda }]; #IO_L16P_T2 Sch=crypto_sda
+
+## Miscellaneous
+#set_property -dict { PACKAGE_PIN B22   IOSTANDARD LVCMOS33 } [get_ports { mcu_rsvd[0] }]; #IO_L18N_T2_AD13N Sch=mcu_rsvd[1]
+#set_property -dict { PACKAGE_PIN B21   IOSTANDARD LVCMOS33 } [get_ports { mcu_rsvd[1] }]; #IO_L18P_T2_AD13P Sch=mcu_rsvd[2]
+
+

tools/xilinx/ps1.bd

@@ -0,0 +1,838 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<bd:repository xmlns:bd="http://www.xilinx.com/bd" bd:BoundaryCRC="0xA9403ED2E5915421" bd:device="xc7z020clg484-1" bd:isValidated="true" bd:synthFlowMode="Hierarchical" bd:tool_version="2018.2" bd:top="ps1" bd:version="1.00.a">
+
+  <spirit:component xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009">
+    <spirit:vendor>xilinx.com</spirit:vendor>
+    <spirit:library>BlockDiagram</spirit:library>
+    <spirit:name>ps1</spirit:name>
+    <spirit:version>1.00.a</spirit:version>
+    <spirit:parameters>
+      <spirit:parameter>
+        <spirit:name>isTop</spirit:name>
+        <spirit:value spirit:format="bool" spirit:resolve="immediate">true</spirit:value>
+      </spirit:parameter>
+    </spirit:parameters>
+    <spirit:busInterfaces>
+      <spirit:busInterface>
+        <spirit:name>FIXED_IO</spirit:name>
+        <spirit:master/>
+        <spirit:busType spirit:library="display_processing_system7" spirit:name="fixedio" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:abstractionType spirit:library="display_processing_system7" spirit:name="fixedio_rtl" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:parameters>
+          <spirit:parameter>
+            <spirit:name>CAN_DEBUG</spirit:name>
+            <spirit:value>false</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+        </spirit:parameters>
+      </spirit:busInterface>
+      <spirit:busInterface>
+        <spirit:name>DDR</spirit:name>
+        <spirit:master/>
+        <spirit:busType spirit:library="interface" spirit:name="ddrx" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:abstractionType spirit:library="interface" spirit:name="ddrx_rtl" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:parameters>
+          <spirit:parameter>
+            <spirit:name>CAN_DEBUG</spirit:name>
+            <spirit:value>false</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>TIMEPERIOD_PS</spirit:name>
+            <spirit:value>1250</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>MEMORY_TYPE</spirit:name>
+            <spirit:value>COMPONENTS</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>DATA_WIDTH</spirit:name>
+            <spirit:value>8</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>CS_ENABLED</spirit:name>
+            <spirit:value>true</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>DATA_MASK_ENABLED</spirit:name>
+            <spirit:value>true</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>SLOT</spirit:name>
+            <spirit:value>Single</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>MEM_ADDR_MAP</spirit:name>
+            <spirit:value>ROW_COLUMN_BANK</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>BURST_LENGTH</spirit:name>
+            <spirit:value>8</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>AXI_ARBITRATION_SCHEME</spirit:name>
+            <spirit:value>TDM</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>CAS_LATENCY</spirit:name>
+            <spirit:value>11</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>CAS_WRITE_LATENCY</spirit:name>
+            <spirit:value>11</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+        </spirit:parameters>
+      </spirit:busInterface>
+      <spirit:busInterface>
+        <spirit:name>CLK.FCLK_CLK0</spirit:name>
+        <spirit:displayName>Clk</spirit:displayName>
+        <spirit:description>Clock</spirit:description>
+        <spirit:busType spirit:library="signal" spirit:name="clock" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:abstractionType spirit:library="signal" spirit:name="clock_rtl" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:slave/>
+        <spirit:portMaps>
+          <spirit:portMap>
+            <spirit:logicalPort>
+              <spirit:name>CLK</spirit:name>
+            </spirit:logicalPort>
+            <spirit:physicalPort>
+              <spirit:name>FCLK_CLK0</spirit:name>
+            </spirit:physicalPort>
+          </spirit:portMap>
+        </spirit:portMaps>
+        <spirit:parameters>
+          <spirit:parameter>
+            <spirit:name>FREQ_HZ</spirit:name>
+            <spirit:value>100000000</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="user_prop"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>PHASE</spirit:name>
+            <spirit:value>0.000</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+          <spirit:parameter>
+            <spirit:name>CLK_DOMAIN</spirit:name>
+            <spirit:value>ps1_processing_system7_0_0_FCLK_CLK0</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default_prop"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+        </spirit:parameters>
+      </spirit:busInterface>
+      <spirit:busInterface>
+        <spirit:name>RST.FCLK_RESET0_N</spirit:name>
+        <spirit:displayName>Reset</spirit:displayName>
+        <spirit:description>Reset</spirit:description>
+        <spirit:busType spirit:library="signal" spirit:name="reset" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:abstractionType spirit:library="signal" spirit:name="reset_rtl" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:slave/>
+        <spirit:portMaps>
+          <spirit:portMap>
+            <spirit:logicalPort>
+              <spirit:name>RST</spirit:name>
+            </spirit:logicalPort>
+            <spirit:physicalPort>
+              <spirit:name>FCLK_RESET0_N</spirit:name>
+            </spirit:physicalPort>
+          </spirit:portMap>
+        </spirit:portMaps>
+        <spirit:parameters>
+          <spirit:parameter>
+            <spirit:name>POLARITY</spirit:name>
+            <spirit:value>ACTIVE_LOW</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="default"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+        </spirit:parameters>
+      </spirit:busInterface>
+      <spirit:busInterface>
+        <spirit:name>RST.EXT_RESET_N</spirit:name>
+        <spirit:displayName>Reset</spirit:displayName>
+        <spirit:description>Reset</spirit:description>
+        <spirit:busType spirit:library="signal" spirit:name="reset" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:abstractionType spirit:library="signal" spirit:name="reset_rtl" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:slave/>
+        <spirit:portMaps>
+          <spirit:portMap>
+            <spirit:logicalPort>
+              <spirit:name>RST</spirit:name>
+            </spirit:logicalPort>
+            <spirit:physicalPort>
+              <spirit:name>ext_reset_n</spirit:name>
+            </spirit:physicalPort>
+          </spirit:portMap>
+        </spirit:portMaps>
+        <spirit:parameters>
+          <spirit:parameter>
+            <spirit:name>POLARITY</spirit:name>
+            <spirit:value>ACTIVE_LOW</spirit:value>
+            <spirit:vendorExtensions>
+              <bd:configElementInfos>
+                <bd:configElementInfo bd:valueSource="user"/>
+              </bd:configElementInfos>
+            </spirit:vendorExtensions>
+          </spirit:parameter>
+        </spirit:parameters>
+      </spirit:busInterface>
+    </spirit:busInterfaces>
+    <spirit:model>
+      <spirit:views>
+        <spirit:view>
+          <spirit:name>BlockDiagram</spirit:name>
+          <spirit:envIdentifier>:vivado.xilinx.com:</spirit:envIdentifier>
+          <spirit:hierarchyRef spirit:library="BlockDiagram" spirit:name="ps1_imp" spirit:vendor="xilinx.com" spirit:version="1.00.a"/>
+        </spirit:view>
+      </spirit:views>
+      <spirit:ports>
+        <spirit:port>
+          <spirit:name>FCLK_CLK0</spirit:name>
+          <spirit:wire>
+            <spirit:direction>out</spirit:direction>
+          </spirit:wire>
+        </spirit:port>
+        <spirit:port>
+          <spirit:name>FCLK_RESET0_N</spirit:name>
+          <spirit:wire>
+            <spirit:direction>out</spirit:direction>
+          </spirit:wire>
+        </spirit:port>
+        <spirit:port>
+          <spirit:name>ext_reset_n</spirit:name>
+          <spirit:wire>
+            <spirit:direction>in</spirit:direction>
+          </spirit:wire>
+        </spirit:port>
+      </spirit:ports>
+    </spirit:model>
+  </spirit:component>
+
+  <spirit:design xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009">
+    <spirit:vendor>xilinx.com</spirit:vendor>
+    <spirit:library>BlockDiagram</spirit:library>
+    <spirit:name>ps1_imp</spirit:name>
+    <spirit:version>1.00.a</spirit:version>
+    <spirit:componentInstances>
+      <spirit:componentInstance>
+        <spirit:instanceName>axi_bram_ctrl</spirit:instanceName>
+        <spirit:componentRef spirit:library="ip" spirit:name="axi_bram_ctrl" spirit:vendor="xilinx.com" spirit:version="4.0"/>
+        <spirit:configurableElementValues>
+          <spirit:configurableElementValue spirit:referenceId="bd:xciName">ps1_axi_bram_ctrl_0_0</spirit:configurableElementValue>
+        </spirit:configurableElementValues>
+        <bd:hdl_attributes/>
+      </spirit:componentInstance>
+      <spirit:componentInstance>
+        <spirit:instanceName>axi_bram_ctrl_bram</spirit:instanceName>
+        <spirit:componentRef spirit:library="ip" spirit:name="blk_mem_gen" spirit:vendor="xilinx.com" spirit:version="8.4"/>
+        <spirit:configurableElementValues>
+          <spirit:configurableElementValue spirit:referenceId="bd:xciName">ps1_axi_bram_ctrl_bram_0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="Memory_Type">True_Dual_Port_RAM</spirit:configurableElementValue>
+        </spirit:configurableElementValues>
+      </spirit:componentInstance>
+      <spirit:componentInstance>
+        <spirit:instanceName>axi_smc</spirit:instanceName>
+        <spirit:componentRef spirit:library="ip" spirit:name="smartconnect" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:configurableElementValues>
+          <spirit:configurableElementValue spirit:referenceId="bd:xciName">ps1_axi_smc_0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="NUM_SI">1</spirit:configurableElementValue>
+        </spirit:configurableElementValues>
+      </spirit:componentInstance>
+      <spirit:componentInstance>
+        <spirit:instanceName>processing_system7_0</spirit:instanceName>
+        <spirit:componentRef spirit:library="ip" spirit:name="processing_system7" spirit:vendor="xilinx.com" spirit:version="5.5"/>
+        <spirit:configurableElementValues>
+          <spirit:configurableElementValue spirit:referenceId="bd:xciName">ps1_processing_system7_0_0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_DDR_RAM_BASEADDR">0x00100000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_DDR_RAM_HIGHADDR">0x3FFFFFFF</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UART0_BASEADDR">0xE0000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UART0_HIGHADDR">0xE0000FFF</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SDIO0_BASEADDR">0xE0100000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SDIO0_HIGHADDR">0xE0100FFF</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_FCLK_CLK0_BUF">TRUE</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_FREQ_MHZ">533.333</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_AL">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_0">0.0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_1">0.0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_2">0.0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_TO_CLK_DELAY_3">0.0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_BOARD_DELAY0">0.25</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_BOARD_DELAY1">0.25</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_BOARD_DELAY2">0.25</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_BOARD_DELAY3">0.25</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_0_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_1_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_2_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_3_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_0_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_1_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_2_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_3_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_0_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_1_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_2_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_3_LENGTH_MM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_0_PACKAGE_LENGTH">68.4725</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_1_PACKAGE_LENGTH">71.086</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_2_PACKAGE_LENGTH">66.794</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_3_PACKAGE_LENGTH">108.7385</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_0_PACKAGE_LENGTH">64.1705</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_1_PACKAGE_LENGTH">63.686</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_2_PACKAGE_LENGTH">68.46</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_3_PACKAGE_LENGTH">105.4895</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_0_PACKAGE_LENGTH">61.0905</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_1_PACKAGE_LENGTH">61.0905</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_2_PACKAGE_LENGTH">61.0905</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_3_PACKAGE_LENGTH">61.0905</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_0_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_1_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_2_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQS_3_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_0_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_1_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_2_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_DQ_3_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_0_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_1_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_2_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_3_PROPOGATION_DELAY">160</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_0">-0.007</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_1">-0.010</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_2">-0.006</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PACKAGE_DDR_DQS_TO_CLK_DELAY_3">-0.048</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PACKAGE_DDR_BOARD_DELAY0">0.063</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PACKAGE_DDR_BOARD_DELAY1">0.062</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PACKAGE_DDR_BOARD_DELAY2">0.065</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PACKAGE_DDR_BOARD_DELAY3">0.083</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CPU_CPU_6X4X_MAX_RANGE">667</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CRYSTAL_PERIPHERAL_FREQMHZ">33.333333</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_APU_PERIPHERAL_FREQMHZ">666.666666</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_DCI_PERIPHERAL_FREQMHZ">10.159</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_QSPI_PERIPHERAL_FREQMHZ">200</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SDIO_PERIPHERAL_FREQMHZ">20</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UART_PERIPHERAL_FREQMHZ">100</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PCAP_PERIPHERAL_FREQMHZ">200</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_FPGA0_PERIPHERAL_FREQMHZ">100</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_FPGA1_PERIPHERAL_FREQMHZ">50</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_FPGA2_PERIPHERAL_FREQMHZ">50</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_FPGA3_PERIPHERAL_FREQMHZ">50</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_APU_PERIPHERAL_FREQMHZ">666.666687</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_ACT_DDR_FREQ_MHZ">533.333374</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_DCI_PERIPHERAL_FREQMHZ">10.158730</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_QSPI_PERIPHERAL_FREQMHZ">200.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_SMC_PERIPHERAL_FREQMHZ">10.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_ENET0_PERIPHERAL_FREQMHZ">10.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_ENET1_PERIPHERAL_FREQMHZ">10.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_USB0_PERIPHERAL_FREQMHZ">60</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_USB1_PERIPHERAL_FREQMHZ">60</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_SDIO_PERIPHERAL_FREQMHZ">20.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_UART_PERIPHERAL_FREQMHZ">100.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_SPI_PERIPHERAL_FREQMHZ">10.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_CAN_PERIPHERAL_FREQMHZ">10.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_CAN0_PERIPHERAL_FREQMHZ">23.8095</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_CAN1_PERIPHERAL_FREQMHZ">23.8095</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_I2C_PERIPHERAL_FREQMHZ">50</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_WDT_PERIPHERAL_FREQMHZ">111.111115</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_TTC_PERIPHERAL_FREQMHZ">50</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_PCAP_PERIPHERAL_FREQMHZ">200.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_TPIU_PERIPHERAL_FREQMHZ">200.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_FPGA0_PERIPHERAL_FREQMHZ">100.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_FPGA1_PERIPHERAL_FREQMHZ">10.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_FPGA2_PERIPHERAL_FREQMHZ">10.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_FPGA3_PERIPHERAL_FREQMHZ">10.000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_TTC0_CLK0_PERIPHERAL_FREQMHZ">111.111115</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_TTC0_CLK1_PERIPHERAL_FREQMHZ">111.111115</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_TTC0_CLK2_PERIPHERAL_FREQMHZ">111.111115</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_TTC1_CLK0_PERIPHERAL_FREQMHZ">111.111115</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_TTC1_CLK1_PERIPHERAL_FREQMHZ">111.111115</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ACT_TTC1_CLK2_PERIPHERAL_FREQMHZ">111.111115</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CLK0_FREQ">100000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CLK1_FREQ">10000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CLK2_FREQ">10000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CLK3_FREQ">10000000</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_OVERRIDE_BASIC_CLOCK">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC0_CLK0_PERIPHERAL_DIVISOR0">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC0_CLK1_PERIPHERAL_DIVISOR0">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC0_CLK2_PERIPHERAL_DIVISOR0">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC1_CLK0_PERIPHERAL_DIVISOR0">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC1_CLK1_PERIPHERAL_DIVISOR0">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC1_CLK2_PERIPHERAL_DIVISOR0">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_WDT_PERIPHERAL_DIVISOR0">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SMC_PERIPHERAL_VALID">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SDIO_PERIPHERAL_VALID">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SPI_PERIPHERAL_VALID">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CAN_PERIPHERAL_VALID">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UART_PERIPHERAL_VALID">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_CAN0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_CAN1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_ENET0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_ENET1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_PTP_ENET0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_PTP_ENET1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_GPIO">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_I2C0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_I2C1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_PJTAG">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_SDIO0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_CD_SDIO0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_WP_SDIO0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_SDIO1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_CD_SDIO1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_WP_SDIO1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_SPI0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_SPI1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_UART0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_UART1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_MODEM_UART0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_MODEM_UART1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_TTC0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_TTC1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_WDT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_TRACE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_AXI_NONSECURE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_M_AXI_GP0">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_M_AXI_GP1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_S_AXI_GP0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_S_AXI_GP1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_S_AXI_ACP">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_S_AXI_HP0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_S_AXI_HP1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_S_AXI_HP2">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_S_AXI_HP3">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_DMA0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_DMA1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_DMA2">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_DMA3">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_TRACE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_CROSS_TRIGGER">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_DEBUG">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_CR_FABRIC">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_AXI_FABRIC_IDLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_DDR_BYPASS">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_FABRIC_INTERRUPT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_PROC_EVENT_BUS">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_EXPANDED_IOP">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_HIGH_OCM">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_PS_SLCR_REGISTERS">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USE_CORESIGHT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_EMIO_SRAM_INT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_GP0_NUM_WRITE_THREADS">4</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_GP0_NUM_READ_THREADS">4</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_GP1_NUM_WRITE_THREADS">4</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_GP1_NUM_READ_THREADS">4</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UART0_BAUD_RATE">115200</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_4K_TIMER">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_M_AXI_GP0_ID_WIDTH">12</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_M_AXI_GP0_ENABLE_STATIC_REMAP">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_M_AXI_GP0_SUPPORT_NARROW_BURST">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_M_AXI_GP0_THREAD_ID_WIDTH">12</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_INCLUDE_ACP_TRANS_CHECK">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_S_AXI_HP0_DATA_WIDTH">64</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_S_AXI_HP1_DATA_WIDTH">64</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_S_AXI_HP2_DATA_WIDTH">64</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_S_AXI_HP3_DATA_WIDTH">64</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_DDR">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_SMC">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_QSPI">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_CAN0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_CAN1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_ENET0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_ENET1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_GPIO">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_I2C0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_I2C1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_PJTAG">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_SDIO0">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_SDIO1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_SPI0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_SPI1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_UART0">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_UART1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_MODEM_UART0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_MODEM_UART1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_TTC0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_TTC1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_WDT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_TRACE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_USB0">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_USB1">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_DQ_WIDTH">32</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_DQS_WIDTH">4</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_DM_WIDTH">4</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_PRIMITIVE">54</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_CLK0_PORT">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_CLK1_PORT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_CLK2_PORT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_CLK3_PORT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_RST0_PORT">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_RST1_PORT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_RST2_PORT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_RST3_PORT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_CLKTRIG0_PORT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_CLKTRIG1_PORT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_CLKTRIG2_PORT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_EN_CLKTRIG3_PORT">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_IRQ_F2P_MODE">DIRECT</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_VALUE_SILVERSION">3</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_GP0_EN_MODIFIABLE_TXN">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_GP1_EN_MODIFIABLE_TXN">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_IMPORT_BOARD_PRESET">None</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PERIPHERAL_BOARD_PRESET">part0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PRESET_BANK0_VOLTAGE">LVCMOS 3.3V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PRESET_BANK1_VOLTAGE">LVCMOS 1.8V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_ENABLE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_ADV_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_MEMORY_TYPE">DDR 3 (Low Voltage)</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_BUS_WIDTH">32 Bit</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_BL">8</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_HIGH_TEMP">Normal (0-85)</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_PARTNO">MT41J256M16 RE-125</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_TRAIN_WRITE_LEVEL">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_TRAIN_READ_GATE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_TRAIN_DATA_EYE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_CLOCK_STOP_EN">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_DDR_USE_INTERNAL_VREF">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_QSPI_PERIPHERAL_ENABLE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_QSPI_QSPI_IO">MIO 1 .. 6</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_QSPI_GRP_SINGLE_SS_ENABLE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_QSPI_GRP_SINGLE_SS_IO">MIO 1 .. 6</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_QSPI_GRP_SS1_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SINGLE_QSPI_DATA_MODE">x4</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_QSPI_GRP_IO1_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_QSPI_GRP_FBCLK_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_QSPI_INTERNAL_HIGHADDRESS">0xFCFFFFFF</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ENET0_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ENET1_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SD0_PERIPHERAL_ENABLE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SD0_SD0_IO">MIO 40 .. 45</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SD0_GRP_CD_ENABLE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SD0_GRP_CD_IO">MIO 47</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SD0_GRP_WP_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SD0_GRP_POW_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SD1_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UART0_PERIPHERAL_ENABLE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UART0_UART0_IO">MIO 14 .. 15</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UART0_GRP_FULL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UART1_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SPI0_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SPI1_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CAN0_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CAN1_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TRACE_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TRACE_INTERNAL_WIDTH">2</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_WDT_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC0_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC1_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PJTAG_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USB0_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USB1_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_I2C0_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_I2C1_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_GPIO_PERIPHERAL_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_GPIO_MIO_GPIO_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_GPIO_EMIO_GPIO_ENABLE">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_APU_CLK_RATIO_ENABLE">6:2:1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CPU_PERIPHERAL_CLKSRC">ARM PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_DDR_PERIPHERAL_CLKSRC">DDR PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SMC_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_QSPI_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SDIO_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UART_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SPI_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CAN_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_FCLK0_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_FCLK1_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_FCLK2_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_FCLK3_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ENET0_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ENET1_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CAN0_PERIPHERAL_CLKSRC">External</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_CAN1_PERIPHERAL_CLKSRC">External</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TPIU_PERIPHERAL_CLKSRC">External</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC0_CLK0_PERIPHERAL_CLKSRC">CPU_1X</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC0_CLK1_PERIPHERAL_CLKSRC">CPU_1X</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC0_CLK2_PERIPHERAL_CLKSRC">CPU_1X</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC1_CLK0_PERIPHERAL_CLKSRC">CPU_1X</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC1_CLK1_PERIPHERAL_CLKSRC">CPU_1X</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_TTC1_CLK2_PERIPHERAL_CLKSRC">CPU_1X</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_WDT_PERIPHERAL_CLKSRC">CPU_1X</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_DCI_PERIPHERAL_CLKSRC">DDR PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PCAP_PERIPHERAL_CLKSRC">IO PLL</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_USB_RESET_POLARITY">Active Low</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_ENET_RESET_POLARITY">Active Low</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_I2C_RESET_POLARITY">Active Low</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_1_PULLUP">enabled</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_1_IOTYPE">LVCMOS 3.3V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_1_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_2_IOTYPE">LVCMOS 3.3V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_2_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_3_IOTYPE">LVCMOS 3.3V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_3_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_4_IOTYPE">LVCMOS 3.3V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_4_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_5_IOTYPE">LVCMOS 3.3V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_5_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_6_IOTYPE">LVCMOS 3.3V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_6_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_14_PULLUP">enabled</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_14_IOTYPE">LVCMOS 3.3V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_14_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_15_PULLUP">enabled</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_15_IOTYPE">LVCMOS 3.3V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_15_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_40_PULLUP">enabled</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_40_IOTYPE">LVCMOS 1.8V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_40_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_41_PULLUP">enabled</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_41_IOTYPE">LVCMOS 1.8V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_41_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_42_PULLUP">enabled</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_42_IOTYPE">LVCMOS 1.8V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_42_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_43_PULLUP">enabled</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_43_IOTYPE">LVCMOS 1.8V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_43_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_44_PULLUP">enabled</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_44_IOTYPE">LVCMOS 1.8V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_44_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_45_PULLUP">enabled</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_45_IOTYPE">LVCMOS 1.8V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_45_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_47_PULLUP">enabled</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_47_IOTYPE">LVCMOS 1.8V</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_47_SLEW">slow</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_UIPARAM_GENERATE_SUMMARY">NA</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_TREE_PERIPHERALS">unassigned#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#UART 0#UART 0#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#SD 0#SD 0#SD 0#SD 0#SD 0#SD 0#unassigned#SD 0#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_MIO_TREE_SIGNALS">unassigned#qspi0_ss_b#qspi0_io[0]#qspi0_io[1]#qspi0_io[2]#qspi0_io[3]/HOLD_B#qspi0_sclk#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#rx#tx#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned#clk#cmd#data[0]#data[1]#data[2]#data[3]#unassigned#cd#unassigned#unassigned#unassigned#unassigned#unassigned#unassigned</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PS7_SI_REV">PRODUCTION</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_FPGA_FCLK0_ENABLE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS0_T_TR">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS0_T_PC">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS0_T_WP">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS0_T_CEOE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS0_T_WC">11</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS0_T_RC">11</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS0_WE_TIME">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS1_T_TR">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS1_T_PC">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS1_T_WP">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS1_T_CEOE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS1_T_WC">11</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS1_T_RC">11</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_SRAM_CS1_WE_TIME">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS0_T_TR">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS0_T_PC">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS0_T_WP">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS0_T_CEOE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS0_T_WC">11</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS0_T_RC">11</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS0_WE_TIME">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS1_T_TR">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS1_T_PC">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS1_T_WP">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS1_T_CEOE">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS1_T_WC">11</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS1_T_RC">11</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NOR_CS1_WE_TIME">0</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NAND_CYCLES_T_RR">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NAND_CYCLES_T_AR">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NAND_CYCLES_T_CLR">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NAND_CYCLES_T_WP">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NAND_CYCLES_T_REA">1</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NAND_CYCLES_T_WC">11</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_NAND_CYCLES_T_RC">11</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SMC_CYCLE_T0">NA</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SMC_CYCLE_T1">NA</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SMC_CYCLE_T2">NA</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SMC_CYCLE_T3">NA</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SMC_CYCLE_T4">NA</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SMC_CYCLE_T5">NA</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_SMC_CYCLE_T6">NA</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PACKAGE_NAME">clg484</spirit:configurableElementValue>
+          <spirit:configurableElementValue spirit:referenceId="PCW_PLL_BYPASSMODE_ENABLE">0</spirit:configurableElementValue>
+        </spirit:configurableElementValues>
+        <bd:hdl_attributes/>
+      </spirit:componentInstance>
+      <spirit:componentInstance>
+        <spirit:instanceName>rst_ps7_0_100M</spirit:instanceName>
+        <spirit:componentRef spirit:library="ip" spirit:name="proc_sys_reset" spirit:vendor="xilinx.com" spirit:version="5.0"/>
+        <spirit:configurableElementValues>
+          <spirit:configurableElementValue spirit:referenceId="bd:xciName">ps1_rst_ps7_0_100M_0</spirit:configurableElementValue>
+        </spirit:configurableElementValues>
+      </spirit:componentInstance>
+    </spirit:componentInstances>
+    <spirit:interconnections>
+      <spirit:interconnection>
+        <spirit:name>axi_bram_ctrl_BRAM_PORTA</spirit:name>
+        <spirit:activeInterface spirit:busRef="BRAM_PORTA" spirit:componentRef="axi_bram_ctrl_bram"/>
+        <spirit:activeInterface spirit:busRef="BRAM_PORTA" spirit:componentRef="axi_bram_ctrl"/>
+      </spirit:interconnection>
+      <spirit:interconnection>
+        <spirit:name>axi_bram_ctrl_BRAM_PORTB</spirit:name>
+        <spirit:activeInterface spirit:busRef="BRAM_PORTB" spirit:componentRef="axi_bram_ctrl_bram"/>
+        <spirit:activeInterface spirit:busRef="BRAM_PORTB" spirit:componentRef="axi_bram_ctrl"/>
+      </spirit:interconnection>
+      <spirit:interconnection>
+        <spirit:name>processing_system7_0_M_AXI_GP0</spirit:name>
+        <spirit:activeInterface spirit:busRef="M_AXI_GP0" spirit:componentRef="processing_system7_0"/>
+        <spirit:activeInterface spirit:busRef="S00_AXI" spirit:componentRef="axi_smc"/>
+      </spirit:interconnection>
+      <spirit:interconnection>
+        <spirit:name>axi_smc_M00_AXI</spirit:name>
+        <spirit:activeInterface spirit:busRef="M00_AXI" spirit:componentRef="axi_smc"/>
+        <spirit:activeInterface spirit:busRef="S_AXI" spirit:componentRef="axi_bram_ctrl"/>
+      </spirit:interconnection>
+    </spirit:interconnections>
+    <spirit:adHocConnections>
+      <spirit:adHocConnection>
+        <spirit:name>processing_system7_0_FCLK_CLK0</spirit:name>
+        <spirit:internalPortReference spirit:componentRef="processing_system7_0" spirit:portRef="FCLK_CLK0"/>
+        <spirit:externalPortReference spirit:portRef="FCLK_CLK0"/>
+        <spirit:internalPortReference spirit:componentRef="axi_bram_ctrl" spirit:portRef="s_axi_aclk"/>
+        <spirit:internalPortReference spirit:componentRef="axi_smc" spirit:portRef="aclk"/>
+        <spirit:internalPortReference spirit:componentRef="processing_system7_0" spirit:portRef="M_AXI_GP0_ACLK"/>
+        <spirit:internalPortReference spirit:componentRef="rst_ps7_0_100M" spirit:portRef="slowest_sync_clk"/>
+      </spirit:adHocConnection>
+      <spirit:adHocConnection>
+        <spirit:name>processing_system7_0_FCLK_RESET0_N</spirit:name>
+        <spirit:internalPortReference spirit:componentRef="processing_system7_0" spirit:portRef="FCLK_RESET0_N"/>
+        <spirit:externalPortReference spirit:portRef="FCLK_RESET0_N"/>
+        <spirit:internalPortReference spirit:componentRef="rst_ps7_0_100M" spirit:portRef="ext_reset_in"/>
+      </spirit:adHocConnection>
+      <spirit:adHocConnection>
+        <spirit:name>rst_ps7_0_100M_peripheral_aresetn</spirit:name>
+        <spirit:internalPortReference spirit:componentRef="rst_ps7_0_100M" spirit:portRef="peripheral_aresetn"/>
+        <spirit:internalPortReference spirit:componentRef="axi_bram_ctrl" spirit:portRef="s_axi_aresetn"/>
+        <spirit:internalPortReference spirit:componentRef="axi_smc" spirit:portRef="aresetn"/>
+      </spirit:adHocConnection>
+      <spirit:adHocConnection>
+        <spirit:name>aux_reset_in_0_1</spirit:name>
+        <spirit:externalPortReference spirit:portRef="ext_reset_n"/>
+        <spirit:internalPortReference spirit:componentRef="rst_ps7_0_100M" spirit:portRef="aux_reset_in"/>
+      </spirit:adHocConnection>
+    </spirit:adHocConnections>
+    <spirit:hierConnections>
+      <spirit:hierConnection spirit:interfaceRef="FIXED_IO/processing_system7_0_FIXED_IO">
+        <spirit:activeInterface spirit:busRef="FIXED_IO" spirit:componentRef="processing_system7_0"/>
+      </spirit:hierConnection>
+      <spirit:hierConnection spirit:interfaceRef="DDR/processing_system7_0_DDR">
+        <spirit:activeInterface spirit:busRef="DDR" spirit:componentRef="processing_system7_0"/>
+      </spirit:hierConnection>
+    </spirit:hierConnections>
+  </spirit:design>
+
+  <spirit:component xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009">
+    <spirit:vendor>xilinx.com</spirit:vendor>
+    <spirit:library>Addressing/processing_system7_0</spirit:library>
+    <spirit:name>processing_system7</spirit:name>
+    <spirit:version>5.5</spirit:version>
+    <spirit:busInterfaces>
+      <spirit:busInterface>
+        <spirit:name>M_AXI_GP0</spirit:name>
+        <spirit:master>
+          <spirit:addressSpaceRef spirit:addressSpaceRef="Data"/>
+          <spirit:baseAddress spirit:maximum="0x7FFFFFFF" spirit:minimum="0x40000000">0x40000000</spirit:baseAddress>
+        </spirit:master>
+        <spirit:busType spirit:library="interface" spirit:name="aximm" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:abstractionType spirit:library="interface" spirit:name="aximm_rtl" spirit:vendor="xilinx.com" spirit:version="1.0"/>
+        <spirit:parameters>
+          <spirit:parameter>
+            <spirit:name>master_id</spirit:name>
+            <spirit:value>0</spirit:value>
+          </spirit:parameter>
+        </spirit:parameters>
+      </spirit:busInterface>
+    </spirit:busInterfaces>
+    <spirit:addressSpaces>
+      <spirit:addressSpace>
+        <spirit:name>Data</spirit:name>
+        <spirit:range>4G</spirit:range>
+        <spirit:width>32</spirit:width>
+        <spirit:segments>
+          <spirit:segment>
+            <spirit:name>SEG_axi_bram_ctrl_Mem0</spirit:name>
+            <spirit:displayName>/axi_bram_ctrl/S_AXI/Mem0</spirit:displayName>
+            <spirit:addressOffset>0x40000000</spirit:addressOffset>
+            <spirit:range>128K</spirit:range>
+          </spirit:segment>
+        </spirit:segments>
+      </spirit:addressSpace>
+    </spirit:addressSpaces>
+  </spirit:component>
+
+</bd:repository>

tools/xilinx/qlaser_timing.xdc

@@ -0,0 +1,3 @@
+## 125MHz Clock from Ethernet PHY
+create_clock -period 8.000 -name sys_clk_pin -waveform {0.000 4.000} -add [get_ports p_clk]
+

tools/xilinx/set_usercode.xdc

@@ -0,0 +1,28 @@
+##---------------------------------------------------------------------------------------
+## Filename : set_usercode.xdc
+##
+## Vivado onstraint file to set user version number into the bitfile
+##---------------------------------------------------------------------------------------
+
+#----------------------------------------------------------------------------------------
+#-- Usercode major revisions
+#----------------------------------------------------------------------------------------
+#-- 0x0000_NNNN     : Early debug and test. No PMODs,ZMODs, DACs etc
+#-- 0x1AC0_NNNN     : DC PMODs, 4? single bit pulses.  NNN incremented each bitfile
+#-- 0x1DC0_NNNN     : DC PMODs DAC versions.           NNN incremented each bitfile
+#-- 0x2AC0_NNNN     : DC PMODs, AC ZMODs. 4 channel    NNN incremented each bitfile
+#-- 0x3AC0_NNNN     : DC PMODs, JESD AC (16ch Abaco board)    NNN incremented each bitfile
+#
+#----------------------------------------------------------------------------------------
+#-- Usercode history
+#----------------------------------------------------------------------------------------
+#-- 0x1DC0_0001     : Original release 
+#-- 0x1DC0_0002     : Modified double blink and added QSPI and SD into the PS1 block
+#-- 0x1DC0_0003     : SD pins on 1.8V bank. Add SD_CD on MIO47
+#-- 0x1DC0_0004     : SD clock dropped from 100MHz to 20Mhz
+#-- 0x1DC0_0005     : Restore internal reference enable for pmod DACs
+#--
+#----------------------------------------------------------------------------------------
+# In VHDL package : constant C_QLASER_VERSION   : std_logic_vector(31 downto 0)
+#----------------------------------------------------------------------------------------
+set_property BITSTREAM.CONFIG.USERID 32'h1DC00005 [current_design]